JBL Vibe Beam
Aidosti langattomat nappikuulokkeet
Getting started with your JBL Vibe Beam
Documents & Downloads
Product Specifications
- Elementin koko (mm)
- 8
- Elementin herkkyys @ 1kHz/1mW (dB)
- 100
- Dynaaminen taajuusvaste (Hz)
- 20 Hz – 20 kHz
- Impedanssi (ohmia)
- 16
- Latauskotelon paino (g)
- 39.5
- Charging Case Weight (oz)
- 1.4
- Kuulokekapselin paino (g)
- 8.8
- Earpiece Weight (oz)
- 0.3
- Bluetooth profiilit
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth-taajuus
- 2.4 GHz - 2.4835 GHz
- Bluetooth-lähettimen modulaatio
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth-lähettimen teho
- <15 dBm
- Bluetooth-versio
- 5.2
- Latausaika (tuntia, kun akku on tyhjä)
- 2
- Maksimi toistoaika (tuntia)
- 8
- Bluetooth
- Kyllä
- Charging cable
- Kyllä
- Päästää läpi ympäristön äänet
- Kyllä
- Sisäänrakennettu mikrofoni
- Kyllä
- Latauskotelo
- Kyllä
- Hands-free-puhelut
- Kyllä
- Ladattava akku
- Kyllä
- Pikalataus (5 min = 1 tunnin soittoaika)
- Kyllä
- TalkThru-monitoimipainike
- Kyllä
- Kosketusohjaimet
- Kyllä
- Aidosti langaton
- Kyllä
- Water Resistant
- Kyllä
- IPX-luokitus
- IPX54 earbuds/IPX2 charging case
Syvät bassot antavat potkua arkeen
Pidä soundi aina mukanasi. Basso, jonka tunnet kehossasi, jopa 32 tunnin akunkesto ja varma, tiukasti korvaan istuva rakenne sekä roiske- ja pölysuojaus tekevät JBL Vibe Beam -nappikuulokkeista täydellisen valinnan päivittäiseen menoon. Kuljetpa sitten kaupungin kaduilla tai vietät aikaa rannalla rentoutuen, handsfree-stereopuhelusi ovat aina kristallinkirkkaita ja Smart Ambient -teknologia pitää sinut tietoisena ympäristöstäsi. Kun tarvitset lisätehoa, saat pikalatauksella kaksi lisätuntia virtaa vain 10 minuutissa.
Ota kaikki irti soittolistoistasi korkealaatuisella äänentoistolla hyvin istuvista ja luotettavista nappikuulokkeista, joissa on 8 mm:n kuuloke-elementit ja JBL Deep Bass Sound.
JBL Vibe Beam -kuulokkeiden ergonominen, tiukasti korvaan istuva rakenne on niin mukava, että saatat unohtaa kuulokkeiden olevan korvissasi. Suljettu rakenne ei päästä läpi ulkopuolisia ääniä, mikä vahvistaa bassotehoa.
JBL Vibe Beam -kuulokkeet tarjoavat äänentoistoa koko päiväksi nappikuulokkeiden 8 tunnin ja latauskotelon 24 tunnin akunkestolla. Kun tarvitset enemmän virtaa, saat pikalatauksella kaksi lisätuntia virtaa vain 10 minuutissa.
Smart Ambient -teknologian ansiosta kuulet kaiken, missä tahansa liikutkin. Kun haluat pitää tauon kuuntelusta nopeaa keskustelua varten, TalkThru -tekniikan avulla kuulet välittömästi itsesi ja muut ihmiset ottamatta kuulokkeita pois korvistasi. Voit myös käyttää Ambient Aware -tilaa, jotta voit samanaikaisesti kuunnella musiikkia ja pysyä tietoisena ympäristöstäsi.
Kun soitat handsfree-stereopuheluita liikkeellä ollessasi, VoiceAware-ominaisuuden avulla voit säätää sitä, kuinka paljon omaa ääntäsi kuulet puhuessasi muiden kanssa.
IP54-sertifioidut nappikuulokkeet ja IPX2-latauskotelo ovat roiske- ja pölysuojatut koko päivän aina rannalta ralliradalle.
Kuuntele vaikka koko päivä – omalla tavallasi. Valitse haluamasi ääni erityisellä sovelluksella ja muunna JBL Vibe Beamit täydelliseksi äänentoistokumppaniksesi.
FAQs & How-Tos
1 results
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+358 972 522 301
Monday - Friday: 10:00 - 18:00
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00