CINEMA SOUND CST 56

CINEMA SOUND CST 56

Dual 5 inch 2-Way Floorstanding

Såld från 2010 tills nu

Föregående produkt: VENUE STADIUM
Efterträdande produkt: CINEMA SOUND CST 55
Tillverkade i: China

Dokument och hämtningar

Produktspecifikationer

Crossover Frequency(ies)
3.2kHz; 12dB/octave
MSRP U.S.
$399.95 each
Sensitivity
(2.83V@1m) 90dB
Frequency Response
(-6dB) 55Hz-30kHz
Maximum Recommended Amplifier Power
150W
Power Handling (Peak)
300W
Nominal Impedance
8 ohms
Weight (lb)
17
Width (in)
11-1/4
Depth (mm)
286
Height (in)
46
Weight (kg)
7.7
Width (mm)
286
Depth (in)
11-1/4
Height (mm)
1168
High-Frequncy Transducer
3/4" (19mm) titanium-laminate dome, video shielded
Low-Frequency Transducer
Dual 5" (130mm) transducers with PolyPlas cones, neodymium magnets and HeatScape motor structure, video-shielded

Designed to perfectly integrate with the latest flat-panel and plasma televisions, the JBL Cinema Sound; CST56 brings JBL's professional experience to your home. Proprietary JBL technology, such as PolyPlas;-reinforced woofers and titanium-laminate tweeters mounted in Elliptical Oblate Spheroidal; (EOS;) waveguides, means your favorite music and movies sound just as the artist intended. The CST56 features a black enclosure with a high-gloss-black front panel and black grille to complement any living environment.

Stiffer cones deliver more uniform pistonic motion for deeper, tighter bass and improved midrange tones. PolyPlas™ coating gives the JBL® CST56’s cones maximum-impact JBL® audio. You’ll experience serious, feel-it-in-your-bones bass and cinema sound that does justice to a great HDTV picture.
The HeatScape™ motor structure envelops the JBL® CST56’s voice coil with a large ceramic magnet and a steel frame. It protects the voice coil by dissipating heat away from it to increase power handling and give you extremely low levels of harmonic distortion.
The JBL® CST56’s thin but rigid titanium-laminate tweeter delivers accurate high-frequency response, even when the volume is way up. The end result is full, clear, tight reproduction of sound. And there’s a seamless transition between the middle and high frequencies.
Elliptical Oblate Spheroidal TM (EOS) waveguides, originally developed for JBL® Professional LSR studio monitors, disperse the JBL® CST56’s clean high-frequency sound precisely across a wide listening area. There’s no “sweet spot.” Sit wherever you want.
By providing the shortest possible route from the input terminals to the transducers, the JBL® CST56’s proprietary crossover design minimizes noise and signal loss. So you’ll hear everything your TV and music sources can dish out.
At 55Hz to 30kHz, with 90dB sensitivity, nothing is over- or under-emphasized by the JBL® CST56. You get a true, full sound range from deep bass tones to ultrahigh frequencies.
With 50 watts of continuous power handling and 300 peak, the JBL® CST56 performs like a pro. It uses technology derived directly from JBL® Professional products and gives your home theater audio the unparalleled spaciousness and definition it wants.
Put the JBL® CST56 anywhere that makes sense in your home theater setup. It’s magnetically shielded for placement on the floor wherever you want, including right near your TV or video display.

Hittade du inte det du sökte efter?

Ring oss

Ring oss

Ring oss på: +46 850512632

Måndag – fredag: 09:00-17:00

Skicka e-post till oss

Skicka e-post till oss

Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!

Skicka e-post till oss
Chatta med oss

Chatta med oss

Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00

message

WhatsApp oss

WhatsApp-support endast på engelska

Skicka ett meddelande till oss på engelska här 

Måndag – fredag: 09.00-18.00
Lördag – söndag: 10:00-16:00