As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.

If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues.

 

1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.

The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order.

1. Forget/unpair the headphones on your device.
2. Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
3. Pair the headphones to your device and see if this resolves the problem.
4. If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
5. Initiate a Product Reset to reset the earbud’s Bluetooth connection.
   • Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
   • Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
   • Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
   • Pair the buds to your Source Device.

Si tiene problemas de carga con los auriculares True Wireless, como: uno o ambos auriculares no se están cargando; interrupción de la carga; la carga no comienza o que uno de los auriculares se enciende durante la carga y comienza el proceso de emparejamiento.

Estos factores son causados ​​por la suciedad en los contactos de carga tanto en el estuche de carga como en los auriculares. Estos contactos son vulnerables porque pueden contaminarse fácilmente con el sudor, la grasa de la piel o la cera de los oídos. Suelen estar bañados en oro, pero eso no evita que se ensucie la superficie.

Si tienes problemas de carga, el primer paso es limpiar siempre todos los puntos de contacto, tanto en el auricular como en el estuche de carga.
Necesitará: paño de algodón, hisopos de algodón (puntiagudos y redondos) y alcohol.

Use un hisopo de algodón afilado humedecido con alcohol para limpiar los terminales de carga de los auriculares, luego use un paño de algodón para quitar el polvo y los restos de algodón que dejaron los auriculares en los auriculares. Es importante realizar este proceso periódicamente para mantener limpios tus auriculares, evitando así afectar la velocidad / calidad de carga.

Limpie las ranuras y las clavijas de contacto del estuche de carga con un hisopo de algodón limpio. El hisopo se puede humedecer ligeramente, pero es importante que el interior esté completamente seco antes de cerrar la caja. Usa el paño de algodón y espera a que se seque.

Este procedimiento se puede realizar en todos los auriculares y estuches TWS.

Este auricular no es compatible con los Códec de audio aptX, aptX HD, aptX de baja latencia.

This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.