JBL Tune 220TWS

JBL Tune 220TWS

True wireless earbuds

Sold from 2019 until now

Documents & Downloads

Product Specifications

Driver size (mm)
12
Driver sensitivity at 1kHz/1mW (dB)
105
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
32
Number of drivers per ear
1
Charging Case Weight (g)
49.7
Charging Case Weight (oz)
1.8
Earpiece Weight (g)
9.8
Earpiece Weight (oz)
0.3
Bluetooth profiles
A2DP 1.3, AVRCP 1.5, HFP 1.6
Bluetooth frequency
2.402 GHz – 2.48 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power
0 - 12dbm
Bluetooth version
5.0
Charging case battery life (max hours)
16
Charging time (hours from empty)
2
Maximum play time (hours)
3
Bixby
Yes
Bluetooth
Yes
Charging cable
Yes
Voice Assistant integration
Yes
Bixby
YES
Charging case
Yes
Hands Free Call
Yes
JBL Pure Bass Sound
Yes
Rechargable battery
Yes
True Wireless
Yes
Wireless
Yes

Connect to true sound in a design that pops in every color.

Move free with earbuds that keep up with you, and stay connected without staying tethered to wires. Whether you are tuning into an Android or an iPhone device, the JBL TUNE 220TWS earbuds have you covered with true wireless capability. Just charge up and get going. These ergonomic wireless buds hold their own, comfortable for up to 19 hours of JBL Pure Bass Sound you cannot get anywhere else. Switch seamlessly between calls, music, and your voice assistant. With metallic finishes, soft-touch paint, and both classic white and trendy colors to choose from, your pair can be as unique and stylish as you are.

JBL TUNE 220TWS earbuds don't go for average, but play standout audio. With a 12.5mm driver featuring JBL Pure Bass Sound, they do not skimp on sound.
Find your groove and stay in it. These earbuds give you up to 3 hours of nonstop sound plus up to another 16 hours max from the pocket-sized charging case.
No annoying wires, no tangles — just your music when and where you want it, compatible with both iPhone and Android devices. From wire-free music to hands-free calls, they keep up while you keep moving.
Go from playlist to call to Voice Assistant without missing a beat. Convenient buttons on the right and left earbuds for switching tracks, playing, pausing, voice command, and taking calls put you in control every step of the way.
Grabbing a call mid-song doesn't have to interrupt your flow. Switch back and forth with on-ear controls and go hands-free for stereo-mode calls that are completely distortion-free.
They may be small in size but they have a big wow factor, with a sleek metallic finish and soft-touch paint. Go classic white or choose from an array of both trendy and classic colors to match your style.
You'll want to keep them in your ears non-stop — and thanks to the comfortable ergonomic design, you'll be able to. The JBL TUNE 220TWS earbuds were designed with all-day wear in mind.
No detail left to chance. The charging case for the JBL TUNE220TWS is as thoughtfully designed as the earbuds it holds, with a shape inspired by a river stone, a soft body, and a curved lid that pops up to give you fast access to your buds.

FAQs & How-Tos

7 results
  • As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.

    If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues.

    cleaning-earstick-tip 
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
  • This headphone does not feature volume control. You must manually control volume from your device.
  • In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: 028 3 9972 675

(08:30 - 18:00)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us