How To

Support Overview / How To

How To

450 results
  • Can I connect to multiple devices at the same time on the Everest 310/710 headphones?
    To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.
  • Can I connect to multiple devices at the same time on the Inspire/Focus 500 headphones?
    Yes, these headphones can be connected and paired to two devices at the same time.
  • Can I connect to multiple devices on the E65BTNC?
    Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.
  • Can I connect to multiple devices on the JBL DUETNC?
    Yes. The JBL DUETNC headphones have the ability to pair and connect to two devices at the same time.
  • Can I create my own custom equalization settings?
    Yes!
    By using the JBL ONE app, you can change the equalization settings of the soundbar to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:
    • BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
    • MID: Adjust the mid-frequency sounds, such as human speech.
    • TREBLE: Adjust the higher frequency sounds for clarity.
  • Can I factory reset my JBL Playlist speaker?
    Yes, the JBL Playlist can be reset to factory settings. First, Power ON the JBL Playlist. Secondly, press and hold the Play and Volume (-) buttons simultaneously for about 10 seconds, and after 10 seconds you should see the Play/Pause and Bluetooth button light up, followed by the speaker going into Standby. Once you see the speaker powers back ON, reset is complete.
  • Can I get wallmounts for Control Xstream
    Please note that although the Control Xstream does have a threaded insert for brackets, JBL offers no brackets. Custom made wallmounts should be used.
  • Can I listen to music while charging my E55BT or E45BT?
    Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Can I listen to music while charging my E65BTNC?
    Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Can I listen to music while charging my JBL DUET NC?
    Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Can I pair my Focus 500/700 to multiple devices?
    Yes, these headphones can be connected and paired to two devices at the same time.
  • Can I program my TV remote to the JBL Bar Studio, Bar 2.1, Bar 3.1, Bar 5.1 and Bar 9.1?
    Yes. Out-the-box the JBL Bar series soundbar recognizes volume and mute controls from the most common TV remote controls. The JBL Bar series has IR learning. You can use this feature to teach the soundbar to response to your TV's remote control as well.
  • Can I replace the ear pads on my Everest 700 or Elite 700 headphones?
    It is possible to replace the ear pads, but there are details to consider. On Elite 700: The ear pads are held in place by a plastic plate with claws, and some of the claws will most likely break off when you remove the pad. You do this by grabbing under the edge where the fabric ends, then pulling hard outward. The claws will eventually let go, and some of them will break off, rattling inside the ear pod. The only way to get them out is to unscrew the speaker plate, lift it up, and shake out the broken-off claws. The new pads are simply centered over the speaker plate, and the claws pressed into the holes with a firm pressure. On Everest 700: The ear pads are glued into position with double-adhesive tape. Pull the old pads off with a forceful, steady pull, until the glue lets go. Remove the protective layer on the new pads, and carefully position them correctly before pressing home all the way around the edge.
  • Can I share TV sound through JBL Connect using SB450?
    You can only share the sound via JBL Connect through Bluetooth connected devices. TV sound is not permitted as it would cause lip-sync issues.
  • Can I stream Google Chromecast via my PC to Control Xstream?
    Yes, Control Xstream is a Chromecast device that allows you to cast music content via your Chrome browser. However, the JBL Control Xstream is not made for video purposes, because there will be delay between sound and image.
  • Can I take phone calls with the JBL Duet Mini BT headphone?
    Yes, the JBL Duet Mini features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.
  • Can I use 2 JBL Boombox speakers in Stereo?
    Yes, from within the JBL Connect App, when you have 2 JBL Boombox speakers connected, set them in Stereo Mode. When you add a 3rd ( or more ) JBL Boombox speakers, they will automatically revert back to Party mode
  • Can I use Bluetooth with my Control Xstream
    Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX input
  • Can I use my E65BTNC as a noise-cancelling headset without music?
    Yes, you do not need to have music playing to keep the noise cancelling switched on. There may be a slight residual hiss from the NC system, which would usually be masked by music, but there will still be a significant reduction of external noise.
  • Can I use my TUNE600BTnc as noise-reduction headset without music?
    Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.
  • Can I use the Everest Noise Cancelling feature while plugged into a device with my audio cable or flight adapter?
    No. The only way that the Noise Cancellation feature can be activated is while you are using the headphones wirelessly. You cannot use NC while the headphones are plugged into a device or charging.
  • Can I use the JBL Quantum 800 in USB mode
    The JBL Quantum 800 can only be used via a 3.5mm, Bluetooth, or 2.4Ghz wireless connection.
  • Can I use the soundbar without the App?
    Yes, however, the JBL ONE App gives you another level of control over the soundbar.
    Through the App, you can personalize the soundbar's performance, such as:
    • Customizing EQ settings
    • Setting up our new feature called: My Moment 
    • Connect your favorite streaming music services.
  • Can I use the Soundgear with its BTA 20 Bluetooth transmitter with all kinds of sources?
    Yes, all sources that output analog stereo line-level signals or stereo audio optical digital signals may be used, cable-connected to the BTA 20 transmitter. Digital signals must be in PCM format. So if you have a CD player or an FM radio, you can connect the BTA 20 to it, and transmit to your Soundgear (or to other Bluetooth headphones that support the format). Please note that record players need an additional preamplifier to work this way. Of course a TV set can be connected as well, either via optical digital PCM output, via line outputs or via headphone output.
  • Can I wirelessly link JBL Flip 4 together with JBL Flip 3, Pulse 2 or Xtreme?
    No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ feature
  • Can JBL Soundgear be used with a TV or with video games?
    Yes, you can use your Soundgear for TV watching or playing video games. You can use the TV speakers and the Soundgear simultaneously, they will be synchronized in time.
  • Can the Endurance Series be connected to more than one device at a time?
    The headphones can pair to multiple devices but can only be connected to one device at a time.
  • Can the JBL Endurance SPRINT, JUMP and DIVE be used in salt water (i.e. sea)?
    The JBL Endurance SPRINT, JUMP and DIVE can be used in salt water (i.e. sea) but we recommend to thoroughly wash the headphones in fresh water after every use in salt water, to remove the salt residue. Please note that only DIVE can actually be used in water, because it features a function lock and a built-in memory for MP3 music files. SPRINT and JUMP cannot be used in water, because the touch buttons will malfunction when submerged, and Bluetooth cannot function at all under water.
  • Can the JBL Endurance SPRINT, JUMP and DIVE be used to swim?
    Because bluetooth cannot travel through water, the only Endurance model that is used for swimming is the Endurance DIVE model. The Endurance DIVE model features an MP3 player which allows you to listen to music under water without using bluetooth. Furthermore, only DIVE features a function lock, which prevents water from activating functions inadvertently. SPRINT and JUMP do not have this lock function, and will not work under water.
  • Can the size be adjusted on OR300?
    Yes, the click-on connector that holds the earphone in place on the Oculus Rift is adjustable in small clicks, longer or shorter.
< 1 2 3 4 5 6 ... 15 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +(662) 2560020

Mon - Fri - 9:00 a.m 6:00 p.m