JBL Vibe 100TWS
Great sound, no-frills and no-wires? Simple: JBL Vibe 100TWS. Powered by JBL Deep Bass Sound, these true wireless headphones color your day with up to 20 hours of playback. Total freedom from wires means hands-free calls and full comfort. Immediately paired and independent thanks to dual connect, music, calls and voice assistant can be controlled from the earbud, so you can keep the flow going. Enjoy daily!
Product Specifications
General Specifications
| Driver size (mm) | 8 |
|---|---|
| IP Code | IPX2 |
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 105.5 |
|---|---|
| Dynamic frequency response range (Hz) | 20 Hz – 20 kHz |
| Impedance (ohms) | 16 |
| Number of drivers per ear | 1 |
Dimension Specifications
| Charging Case Weight (oz) | 1.3 |
|---|---|
| Earpiece Weight (oz) | 0.4 |
| Charging Case Weight (g) | 36.1 |
| Earpiece Weight (g) | 10.2 |
Control Connect Specifications
| Bluetooth profiles | A2DP V1.3 AVRCP V1.6 HFP V1.7 |
|---|---|
| Bluetooth frequency | 2.4 GHz – 2.4835 GHz |
| Bluetooth transmitted modulation | GFSK, π/4DQPSK, 8DPSK |
| Bluetooth transmitter power | 0 - 10dbm |
| Bluetooth version | 5.0 |
Documents & Downloads
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 x JBL Vibe 100TWS headphones
- 1 x USB Type-C charging cable
- 1 x 2 sizes of eartips
- 1 x Charging case
- 1 x Quick Start Guide / Safety Sheet (S / i)
- 1 x Warranty / Warning (W / !)
FAQs & How-Tos
How to Factory Reset True Wireless Stereo Earbuds
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (SGT)