STUDIO L890

STUDIO L890

Dual 8 inch 4-Way Floorstanding

2005 부터 현재까지 판매

이전 제품: STUDIO S412P II
후속 제품: Studio 590
에서 만든: Mexico

STUDIO L890 제품 사용 시작하기

Product Registration

제품 등록하기

이 제품을 소유하고 계신가요? 여기에서 등록하세요! 그리고 보증 또는 서비스를 간편하게 요청하세요

지금 등록

문서 및 다운로드

제품 사양

Finish
Black
Type
Floor-Standing Speakers
MSRP U.S.
$799.95 each
Power Handling (Peak)
500W
Power Handling (Recommended)
125W
Maximum Recommended Amplifier Power
250W
Sensitivity
(2.83V@1m) 91dB
Nominal Impedance
8 ohms
Frequency Response
28Hz-40kHz
Crossover Frequencies
700Hz, 5000Hz, 20kHz
Height (in)
42-1/4
Depth (mm)
380
Weight (kg)
27.5
Height (mm)
1075
Weight (lb)
60
Width (mm)
259
Depth (in)
15
Width (in)
10-1/4
Low-Frequency Transducer
Dual 8" PolyPlas Cones with Rubber Surrounds and Cast-Aluminum Chanssis; HeatScape Motor Structures; Symmetrical Field Geometry (SFG); Oversized Kapton Voice Coils; Magnetic Shorting Rings
High-Frequncy Transducer
1" Pure-Titanium Dome with Cast Aluminum Chassis in JBL EOS Waveguide
Ultra High Frequency Transducer
19mm (3/4") Mylar Dome with Cast-Aluminum Chassis
Midrange Transducer
4" PolyPlas Cone with Rubber Surround and Cast-Aluminum Chassis; HeatScape Motor Structure

The L890 floorstanding speaker is video shielded and features PolyPlas; woofers and a pure-titanium tweeter to deliver accurate performance with dramatically reduced distortion for incredibly realistic sound. Dual 8 inch woofers deliver maximum bass impact and excitement and the ultrahigh-frequency driver extends response out to 40kHz. Perfect for SACD or DVD-Audio recordings. The tweeter is mounted in our proprietary Elliptical Oblate Spheroidal (EOS;) waveguide for improved high-frequency dispersion anywhere in the listening room.

Stiffer cones deliver more uniform pistonic motion for deeper, tighter bass and improved midranges. PolyPlas™ gives maximum impact JBL® audio. You’ll experience serious, feel-it-in-your-bones bass and true sound that does justice to the artist’s original performance.
The HeatScape™ motor structure envelops the voice coil with a large ceramic magnet and steel frame that protects the voice coil by dissipating heat. This increases power handling and gives you extremely low levels of harmonic distortion.
A thin, but rigid, 1” pure titanium-laminate dome tweeter delivers accurate high frequency response, even when the volume is cranked up. A Mylar® dome makes way for open, smooth spacious sound, and a seamless transition between the middle and high frequencies.
Elliptical Oblate Spheroidal™ (EOS) Waveguides, originally developed for JBL® Pro LSR studio monitors, disperse clean, high frequency sound more precisely across a wider listening area. There’s no “sweet spot.” Sit wherever you want.
By taking the shortest possible route from the input terminals to the transducers – simplifying and shortening the path – this proprietary crossover design means you hear everything your TV and music source can dish out.
Dual front-facing FreeFlow™ bass ports are acoustically matched to the woofer and move the air from the cabinet into the room. You get extended bass response with the lowest amount of distortion, adding power to your music and excitement to your movie soundtracks.
From 28Hz to 40kHz, nothing is over- or underemphasized. You get a true, full sound range from deep bass tones to ultra-high frequencies.
With 115W of continuous power handling and 500W peak, the JBL® L890 has robust, muscular delivery. It uses technology derived directly from JBL® Professional studio monitors and gives your home theater audio the unparalleled spaciousness and definition it demands.
Put the JBL® L890 anywhere that makes sense in your home theater set-up. It’s magnetically shielded for placement on the floor or wherever you want it, including right next to your TV or video display.

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시