JBL Quantum 100 상자에는 헤드셋, 분리 가능한 마이크, QSG l 보증 카드 l 경고 카드, 및 마이크용 윈드실드가 포함되어 있습니다.

게임을 하는 동안 하나의 음성 채팅 응용 프로그램만 사용하고 있는지 확인하십시오. 사용 중 마이크가 완전히 삽입되어 있는지 확인하십시오. 마이크는 완전히 삽입된 경우에만 제대로 작동합니다. 제어판> 소리> 녹음에서 PC가 올바른 녹음 장치를 사용하고 있는지 확인하십시오. 적절한 녹음 장치를 선택하고, 마우스 오른쪽 단추를 클릭한 다음, "기본 장치 설정" 또는 "기본 통신 장치 선택"을 선택하십시오. 제어판> 사운드> 녹음> 속성> 레벨에서 마이크 레벨을 확인하고 그에 따라 조정하십시오. 플랫폼이 결합된 오디오 잭을 지원하는지 확인하십시오.

대부분의 경우 컴퓨터/PC/노트북이 블루투스 기기(휴대용 스피커, 헤드폰, 액티브 스피커)에 연결되면서 문제가 발생하며, 이는 컴퓨터/PC/노트북의 블루투스 드라이버(소프트웨어)가 원인입니다.

드라이버(소프트웨어)가 다음과 같은 블루투스 프로토콜을 지원해야, 컴퓨터/PC/노트북에서 음악/소리를 재생할 수 있습니다.

• A2DP(고급 오디오 배포 프로필) 드라이버(사용자의 컴퓨터/PC/노트북에 음악 전송용).

• AVRCP(오디오/동영상 원격 제어 프로필) 드라이버(사용자의 기기에 대한 음악 건너뛰기/앞으로/일시정지/재생 명령 전송용)

반드시 사용자의 컴퓨터/PC/노트북용으로 제공되는 최신 드라이버 버전을 설치합니다.

올바른 드라이버(소프트웨어)를 다운로드하려면, 사용자의 컴퓨터/PC/노트북 제조업체의 웹사이트를 확인합니다. 일반적으로 ‘지원/다운로드’ 섹션에서 맞는 드라이버를 찾을 수 있습니다. 혹은, 해당 업체의 서비스 지원 센터에 연락하기를 권장합니다.

Microsoft/Windows 시스템에서 제공되는 표준 드라이버는 적합하지 않으며 오류 메시지가 표시되거나(PIN 코드를 입력해야 하는 등), 페어링이 작동하지 않습니다.

미래의 비전에서 영감을 받아 첨단 기술로 엔지니어링 된 Quantum은, JBL이 게임 시리즈로 선택한 이름입니다. 양자 컴퓨팅 기술과 양자 물리학을 생각나게 하는 양자(Quantum)라는 이름은, 기술과 과학을 연상시킵니다.

미래의 비전에서 영감을 받아 첨단 기술로 엔지니어링 된 Quantum은, JBL이 게임 시리즈로 선택한 이름입니다. 양자 컴퓨팅 기술과 양자 물리학을 생각나게 하는 양자(Quantum)라는 이름은, 기술과 과학을 연상시킵니다.

제어판>사운드>재생에서 기본 장치로 올바른 장치가 선택되어 있는지 확인하십시오. 헤드셋의 볼륨 컨트롤을 켜야 합니다. 헤드셋의 볼륨 휠을 돌려 볼륨을 높이십시오. 제어판> 소리> 재생에서 올바른 재생 장치가 선택되어 있는지 확인하십시오. 올바른 장치를 선택하고, 마우스 오른쪽 단추를 클릭한 다음, "기본 장치로 설정"을 선택하십시오. 컴퓨터 볼륨 수준을 확인하여 음소거 상태거나 완전히 꺼져 있지 않은지 확인하십시오.

헤드셋 볼륨 컨트롤이 켜져 있는지 확인하십시오. 헤드셋의 볼륨 휠을 돌려 볼륨을 높이십시오. 제어판> 소리> 재생에서 올바른 재생 장치가 선택되어 있는지 확인하십시오. 올바른 장치를 선택하고, 마우스 오른쪽 단추를 클릭한 다음, "기본 장치로 설정"을 선택하십시오. 컴퓨터 볼륨 수준을 확인하여 음소거 상태거나 완전히 꺼져 있지 않은지 확인하십시오.

게임을 하는 동안 하나의 음성 채팅 응용 프로그램만 사용하고 있는지 확인하십시오. 마이크를 젖히면 딸깍 소리가 나는지 확인하십시오. 마이크는 완전히 젖힌 상태에서만 작동합니다. 마이크에 빨간색 LED가 표시되면, 음소거된 것입니다.



PC 설정에서 올바른 레코딩 장치를 확인하는 방법
1. 제어판으로 이동

2. 하드웨어 및 사운드 선택

3. 사운드를 클릭합니다

3 레코딩을 선택합니다


4. 적절한 레코딩 장치를 선택해야 합니다.

1. Quantum 헤드셋을 마우스 오른쪽 버튼으로 클릭합니다.

   

2. 이제 "기본 장치 설정"을 선택하거나 "기본 통신 장치"를 선택합니다.

   

5. Quantum 헤드셋을 마우스 오른쪽 버튼으로 클릭하여 마이크 레벨을 확인합니다. 그런 다음 속성을 클릭합니다.


6. 레벨을 선택합니다.


7. 그에 따라 조정합니다.
 

Windows Sonic은 Windows 10 PC에 내장된 가상 서라운드 알고리즘입니다. 자세한 내용은 다음을 참조하십시오: 
 https://docs.microsoft.com/en-us/windows/win32/coreaudio/spatial-sound

Windows Sonic은 Windows 10 PC에 내장된 가상 서라운드 알고리즘입니다. 자세한 내용은 다음을 참조하십시오: 
https://docs.microsoft.com/en-us/windows/win32/coreaudio/spatial-sound

You can manually type in the network name (SSID) and password to connect if the network does not appear.

With the speaker ON, press and hold the VOL+ and Pause/Play buttons for 5-6 seconds. The Xtreme shuts down, and is now reset. You will need to 'forget' the speaker in Bluetooth settings on your phone/tablet in order to pair it again.

Dolby Atmos is a 3D surround sound format.
Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel. 
Note: This feature only applies to Dolby Audio content.
For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos. 

It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
Once set up, you can directly access it through the remote control or within the JBL ONE App.

There are 5 sound modes: - Standard - Movie - Music - Voice - Sports Out the box, "Standard" sound mode is the default setting. The display on the soundbar's front panel will show which mode you are in (excluding the Bar Studio) Dotted LED lights on the side of the JBL Studio indicates when sound more your are in, the patterns are as follows: - Standard: One LED dot - Movie: Two LED dots - Music: Three LED dots - Voice: Four LED dots - Sports: Five LED dots

Unfortunately, our JBL Quantum DUO speakers are not supported by our QuantumENGINE PC software.
All configuration is done on the speakers itself, and there is no need or required software to change the RGB lights.

You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.

Common fixes:
(1) Make sure that the soundbar is not muted.
(2) Select the correct audio input source on the remote control.
(3) Check the connections to your TV or other devices
(4) Perform a reset if none of the above is working. 
(4.1) Press and hold VOL -, VOL +, and Source buttons to perform a reset.
 

To activate TalkThru Technology, press the LEFT ear for a short press for 1 Second which allows you to clearly hear others for quick conversations without removing headphons. Music volume level should lower when TalkThru is engaged. Press again for 1 second to turn off Talk Thru.

The JBL Quantum 300 headset is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
You can also use the included USB dongle on PC, PlayStation and Mac.

To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds.

헤드셋 볼륨 컨트롤이 켜져 있는지 확인하십시오. 헤드셋의 볼륨 휠을 돌려 볼륨을 높이십시오. USB 동글을 사용하는 경우, 제어판 > 소리 > 재생에서 올바른 재생 장치가 선택되어 있는지 확인하십시오. 올바른 재생 장치를 선택하고, 마우스 오른쪽 단추를 클릭한 다음, "기본 장치로 설정"을 선택하십시오. 컴퓨터 볼륨 수준을 확인하여 음소거 상태거나 완전히 꺼져 있지 않은지 확인하십시오.

스크린 등에 내장된 USB 스플리터 및 익스텐더를 사용하지 마십시오. 소리의 드롭아웃 및 헤드셋의 마이크에서 신호가 약할 수 있습니다. 가능하면 항상 컴퓨터에 직접 연결하거나 단일 연장 코드를 사용하십시오.

JBL Quantum 200은 PC, PlayStation, Xbox, Nintendo Switch, 모바일, Mac 및 VR과 호환됩니다.

Make sure the headset volume control is turned up. Rotate the volume wheel on your headset to increase the volume. Check that the correct playback device is selected under Control Panel > Sound > Playback. Select the correct device, right-click, and select "Set as Default Device". Check the computer volume levels and make sure it is not muted or turned all the way down.

1. Ensure that your JBL One app device is less than 10m/33ft from the soundbar during the initial set-up.
2. Ensure your JBL soundbar is plugged into power and the power LED is illuminated on the BAR.
3. Unplug the power cord, wait 10 seconds, reconnect the power cord and allow the speaker to power up.
4. Temporarily relocate either the BAR or router so that they are closer together.  If the connection succeeds, the original location may be too far from the router to maintain a stable connection.
5. Try using a different device with the JBL ONE app installed and connected to your home network.

Yes. This headphone has a built in microphone. To answer a call, press the power button which is located on the Left Ear Cup for 1 second. If you wish to hang up the call, press and hold the power button for 2 seconds.

교체 부품은 공인 대리점 및 서비스 센터에서 구할 수 있습니다. 자세한 내용과 연락처는 고객 서비스 부서에 문의하십시오.

게임 채팅 밸런스는 Quantum 400 이상에서 이용할 수 있습니다.

JBL Quantum 200에는 JBL QuantumSURROUND가 장착되어 있지 않습니다. USB 동글과 함께 제공되며 JBL QuantumENGINE에 액세스 할 수 있는, Quantum 300을 구매하실 수 있습니다.

JBL Quantum 200 상자에는 헤드셋, PC 오디오 스플리터, QSG l 보증 카드 l 경고 카드, 및 마이크용 윈드실드가 포함되어 있습니다.

JBL Quantum 200에는 JBL QuantumSURROUND가 장착되어 있지 않습니다. USB 동글과 함께 제공되며 JBL QuantumENGINE에 액세스 할 수 있는, Quantum 300을 구매하실 수 있습니다.

JBL Quantum 100에는 JBL QuantumSURROUND가 장착되어 있지 않습니다. USB 동글이 제공되고 JBL QuantumENGINE에 액세스 할 수 있는, JBL Quantum 300을 구매하실 수 있습니다.

The JBL Free automatically switches from stereo to mono when making or taking phone calls. Voice calls will only come through the right ear piece for a more natural call experience.

When you place the two Free earphones in the charging case, you will see a white led ring light up on both of them. At the same time, some of the four dot-leds on the charging case will light up to indicate the battery level of the case battery. When the earphones are fully charged, the white led ring goes out on each of them. When both are fully charged, the charging case charging level leds go out too.

This headphone does not feature volume control. You must manually control volume from your device.

This model is supported by the JBL Partybox App.
Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:

SETTINGS: OTA update | Firmware Version | Quick Start Guide

REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off

LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode

GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode

Yes. All but the Bar Studio model have an LED display on the soundbar's front panel. The display tells which source input, volume level, and sound feature you are on. You are able to dim the display, using the remote, during low light usage.

The speaker uses Bluetooth version 4.2 but does NOT support APT X.

The new Boombox 2 does not feature the Indoor/Outdoor Mode. With the first generation Boombox, the Outdoor Mode was loud, but lacking sufficient bass. The Boombox 2 has both improved bass and loudness to create the perfect balanced sound for all environments.

 
 

It is offering low-latency wireless connectivity via a 2.4Ghz signal that is enabled by a USB dongle included in the box. Turn on the slider, then it automatically connect to the dongle. If you loss the connectivity with the dongle, power on with the slider and hold on for 5 seconds and press and hold the dongle to make sure the pairing until listening to the tone.

(1) Use JBL One App to set up the My Moment Feature.
(2) Select the JBL soundbar you want to set your favorite music to the My Moment feature.
(3) Tap the My Moment card to assign music.
(4) Click Add Music to manage music streaming services and specific music tracks.
(5) Set the timer to inactive speaker/soundbar (optional)
(6) Set the music loudness (optional)
(7) Press SAVE

With our JBL BAR 9.1 Surround there is two types of resets, one is to reset the WiFi settings and last one is to restore factory default settings. Let us walk through each one of them. Resetting WiFi settings Turn on your JBL BAR 9.1 Surround. Press and hold POWER button down for more than 10 seconds. All of your WiFi configuration is lost and you need to reinstall it again. Use the Google Home app to install the device on your WiFi network. Resetting to Factory default settings Turn on your JBL BAR 9.1 Surround Press and hold POWER and SOURCE button for 3 seconds. Your device is now reset. You can now start allover with installing your BAR 9.1 Surround.

The factory reset button restores your device to the default settings, including network and audio configurations. 

Please use one of the following solutions:

1.  Press and hold VOL -, VOL +, and Source buttons on the device at the same time until the LED light flashes (hold for more than 5 seconds)

Or alternatively;

2. Open your JBL ONE App.
3. Navigate to the support tile.
4. Select RESTORE FACTORY SETTINGS. 

Resetting the Partybox to Factory Settings

1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
2. The JBL Partybox will power off and back on and is now reset.

In power ON mode press and hold the "Volume +" and "Play" buttons at the same time for more than 3 seconds -> Unit will power Off by itself. Now the unit is reset to factory default.

(1) On the subwoofer's rear panel, press and hold the pairing button until the LED  turns fast, flashing white.
(2) To enter the subwoofer pairing mode on the soundbar, press and hold the bass button on the remote control for more than three seconds. Then, press VOL - on the remote control.

On the soundbar LED display:
→ "SUB PAIRING": The subwoofer is ready for pairing.
→ "SUB PAIRED": The subwoofer is connected.

Prerequisites:
− Make sure that your room is quiet;
− Make sure that the soundbar and the two detachable rear speakers are fully in sight of each other, without obstacles in between.
− Make sure that the left and right rear speakers are properly placed, the L speaker on the left and the R speaker on the right.

The calibration is done in two steps: Listening zone & Speaker position

Calibrate the listening zone

1. Place the detachable rear speakers beside your seating position.

2. On the remote control, press and hold HDMI until “1-CALIBRATION” is displayed on the soundbar.
→ Countdown starts from 5 to 1.
→ Calibration tone is heard. Audio calibration starts.
→ “CALIBRATING”: Calibration ongoing.
→ “1-DONE”: Calibration of the listening zone is completed successfully.

Calibrate the speaker position

1. Place the detachable rear speakers in your desired location.

2. On the remote control, press and hold HDMI until “2-CALIBRATION” is displayed on the soundbar.
→ Countdown starts from 5 to 1.
→ Calibration tone is heard. Audio calibration starts.
→ “CALIBRATING”: Calibration ongoing.
→ “2-DONE”: Calibration of the speaker position is completed successfully.
3. To select suitable surround sound level, press repeatedly to switch between high, low or middle (default).

NOTES:
− During calibration, all buttons on the remote control are disabled except for STANDBY and HDMI.
− “SETUP FAILED” is displayed if calibration failed.

Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.

For all models except Endurance Peak:
Press the headphone touch control located on the RIGHT ear loop for 15 seconds while the headphones are being charged.
Note that resetting the Dive will not erase music contained in the MP3 memory.

Endurance Peak reset: While the pods are being charged, tap the touch pad on the right pod once, then tap again and hold for approx 18 seconds, or until the LED blinks.

In order to reset the Charge 4, with the unit on, press “Volume+” and “Bluetooth” at the same time for 3-4 seconds until you hear the audible chime.

(1) Select the JBL soundbar you want to rename
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVE

The owner's manual can be a bit difficult to understand. Here is what to do to program a preset station that has not already been saved in any preset: 1 Turn on the radio by clicking the FM button. 2 Find the station you want to save by doing what is shown under pt. 8 B or C, either clicking or pressing/holding for more than 2 seconds the left/right arrow buttons. 3 Press and hold the FM button for more than 2 seconds. Now the preset number appears blinking. 4 Click on the left/right arrow buttons to skip through the preset positions. 5 When you have located the desired memory preset position, such as Preset 4, confirm by clicking the FM button. Now the desired FM station is saved in memory preset 4. If you have already saved an FM station in a preset memory position, and want to have a new station placed there instead, here is what to do: 1 Turn on the radio by clicking the FM button. 2 Jump to the preset station you want to change with the round central button. Each click advances to the next preset. 3 When you are on the preset you want to change, e.g. preset 4, press and hold the FM button for more than 2 seconds. 4 The FM symbol and the frequency will now blink. 5 Before they stop blinking, click, or press and hold one of the arrow buttons to go through the FM frequencies step by step, or perform station search. 6 When you have found the new station you want to save in preset 4, click the round central button. 7 Now the new station is saved in preset 4.

You can reset the E25BT in two ways: 1: Press and hold Volume + and Volume - simultaneously for more than 3 seconds. This resets to factory settings, clearing the pairing list. 2: With unit in ON mode, plug in the USB cable. This resets the unit and puts it into charging mode.

To play the surround sound with DOLBY ATMOS or DTS:X, connect your Blu-ray player or other digital device to the HDMI input connector on the soundbar. If the TV support Dolby ATMOS, served over HDMI ARC, just make sure it is selected in the TV setting menu. To select the most suitable amount of sound effect of DOLBY ATMOS and DTS:X, press on the remote control ATMOS level button, to switch between MID, HIGH, LOW or OFF. Note: If your TV has an eARC HDMI input, you can connect your Blu-ray player or other digital device to the HDMI IN connector on the TV.

In the JBL ONE App:
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product Support

Once the sound bar is connected to the network, software updates will automatically be sent to the speaker/soundbar through Wi-Fi or the internet, if available

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.

Horizon's alarm sounds for 3 minutes, then it shuts off, or rather it goes into snooze, for 9 minutes. Then it sounds the alarm again for 3 minutes, followed by snooze for another 9 minutes. After this final snooze period, it starts playing, and keeps on playing until it is manually shut off. The light shuts off with the audio.