DCR 600 II

DCR 600 II

Dolby Digital/DTS Receiver w/Logic 7 Decoding. Part of the CINEMA PROPACK 600 II system.

문서 및 다운로드

제품 사양

Unit Power Consumption
72W idle, 580W maximum
Two-Channel Stereo Mode
100W per channel continuous RMS power into 8 ohms @ 0.08% THD, 80Hz – 20kHz
Five-Channel Cinema Mode
100W per channel dynamic RMS power into 8 ohms @ 0.08% THD, 80Hz – 20kHz (Plus 100W into 8 ohms @ 0.08% THD, 20Hz to 80Hz for subwoofer)
Input Level/Impedance
200mV/47k ohms
Signal-to-Noise Ratio
95dBA
Surround System Adjacent Channel Separation
Analog Decoding – 40dB Dolby Digital – 55dB DTS – 55dB
Frequency Response
10Hz – 100kHz(+0/–3dB)
Weight
31 lb (14.1kg)
Dimensions
Width... 17.3 inches (440mm); Height... 6.5 inches (165mm); Depth... 17.1 inches (435mm)
Video Formats
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz – 8MHz (–3dB)
Frequency Range
AM... 520kHz – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... 70dB (mono) 68dB (stereo)
Usable Sensitivity
AM... 500µV (loop)
Distortion
AM... 0.8% (1kHz, 50% Modulation)
Distortion
FM... 0.2% (mono) 0.3% (stereo)
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 500mV @ 1kHz, ±75kHz Deviation

Part of the JBL Cinema ProPack 600II system, the DCR600II A/V receiver packs a whalloping punch of 5 times 100 watts per channel, plus a sixth dedicated subwoofer channel that supplies 100 watts to any passive subwoofer added to this unit. With Dolby Digital, Dolby Pro Logic II, DTS and Logic 7 decoding, the DCR600II can handle just about any movie, and play it back the way you want to hear it.

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시