JBL Vibe Flex

True Wireless 헤드폰의 충전 문제는 흔히 발생합니다.
때때로 충전이 중단될 수 있습니다. 충전이 아예 시작되지 않거나 이어 버드 한쪽의 전원이 갑자기 켜지고 페어링 절차가 시작되는 경우가 발생할 수 있습니다.

이는 거의 대부분 충전 접촉부의 오염이 원인입니다. 
이러한 접촉부는 취약한데 땀, 피부 유분이나 귀지로 쉽게 오염될 수 있기 때문입니다.
대개 금도금이 되어 있으나, 금도금은 표면 오염을 막지는 못합니다.

충전 문제가 발생하면, 우선 각 이어 버드 양쪽과 충전 케이스의 모든 접촉부를 늘 깨끗하게 해야 합니다.
미세한 구멍까지 닿기는 쉽지 않을 수 있으나, 일반 면봉이나 메이크업용 면봉을 사용하면 됩니다.   끝을 소독용 알코올로 살짝 적신 다음, 각 접촉면에 가볍게 문질러서 닦아냅니다.
접촉부가 깨끗해 보일 때까지 반복하면, 충전이 제대로 작동됩니다.

This headphone is supported by the My JBL Headphones App.

It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.

Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.

Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.

Repeat until the contact points are visibly clean, and charging should work as designed.

Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.