


JBL Clip 4
Product Specifications
General Specifications
Maximum music playing time (hrs) | 10 |
---|---|
Output power (W) | 5 |
Audio Specifications
Dynamic frequency response range (Hz) | 100Hz - 20kHz |
---|
Dimension Specifications
Dimensions (cm) | 8.6 x 13.5 x 4.6 |
---|---|
Dimensions (in) | 3.4 x 5.3 x 1.8 |
Weight (kgs) | 0.239 |
Weight (lbs) | 0.53 |
Control Connect Specifications
Bluetooth profiles | A2DP 1.3, AVRCP 1.6 |
---|---|
Bluetooth frequency | 2400 – 2483.5MHz |
Bluetooth transmitted modulation | GFSK, π/4 DQPSK, 8DPSK |
Bluetooth transmitter power | ≤ 10 dBm (EIRP) |
Bluetooth version | 5.1 |
Documents & Downloads
Spec Sheets
Manuals
Quick Start Guide
Gallery








Videos
What’s in the Box
- 1 x JBL Clip 4
- 1 x Type C USB cable
- 1 x Quick-Start guide
- 1 x Warranty card
- 1 x Safety sheet

FAQs & How-Tos
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
The difference is that the new ECO versions of Go 3 and Clip 4 are made from 90% PCR (Post-Consumer Recycled) plastic and wrapped in 100% recycled fabric on the speaker grille, while still delivering the same rich JBL Original Pro Sound and significantly reducing the carbon footprint of the product.
Portable speakers with an Aux-in port, such as the Xtreme 3 and Boombox 3 - if connected through an Aux cable, should have less issues compared to using Bluetooth, however there can be issues with audio/video synchronization if used for this purpose.
Support for Bluetooth connectivity between a TV and speaker depends on a number of different factors such as Bluetooth & A2DP versions and Audio Codecs used by each device. This can vary based on the brand, model and age of the devices, however we cannot confirm if any specific combination of TV and speaker will work without issues such as latency or lip sync delay.
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
NANO SOUND
+855 15 512 512, +855 17 717 885
Email: Rottnaleang@gmail.com
Kfour Group Ltd.
078 88 72 82/ 069 82 87 82
Email: bunarong.kit@kfourgroup.com.kh