Bluetooth / Wireless

  • How do I rename my device?
    (1) Select the JBL soundbar you want to rename
    (2) Navigate to the Support tile and select "Rename My Product."
    (3) Press the current name and type in the new name
    (4) Press SAVE
    How do I fix AirPlay not streaming music to my soundbar?
    If you cannot stream music  with AirPlay, use the JBL One App; 
    (1) Go to Settings.
    (2) Select 3rd Party Service.
    (3) Select the Airplay tile.
    (4) Select Reset AirPlay.
    Can I use the soundbar without the App?
    Yes, however, the JBL ONE App gives you another level of control over the soundbar.
    Through the App, you can personalize the soundbar's performance, such as:
    • Customizing EQ settings
    • Setting up our new feature called: My Moment 
    • Connect your favorite streaming music services.
    What does the Moment button do?
    It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
    Once set up, you can directly access it through the remote control or within the JBL ONE App.
    More FAQs
  • Pairing issues with a Computer or PC
    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
    How can I get a software update?
    Once the sound bar is connected to the network, software updates will automatically be sent to the speaker/soundbar through Wi-Fi or the internet, if available
    My Soundbar is not found during setup. How do I solve that?
    1. Ensure that your JBL One app device is less than 10m/33ft from the soundbar during the initial set-up.
    2. Ensure your JBL soundbar is plugged into power and the power LED is illuminated on the BAR.
    3. Unplug the power cord, wait 10 seconds, reconnect the power cord and allow the speaker to power up.
    4. Temporarily relocate either the BAR or router so that they are closer together.  If the connection succeeds, the original location may be too far from the router to maintain a stable connection.
    5. Try using a different device with the JBL ONE app installed and connected to your home network.
  • Pairing issues with a Computer or PC
    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
    Playback Time
    This product supports up to 10 hours of audio playtime. Please note that battery life may vary depending on volume level and content. 
    My device is waterproof, but what about salt water or chlorine water?
    Your JBL speaker is waterproof with IPX7 rating. (IPX7 means it can survive immersion in 1 meter/3.3 feet for up to 30 minutes.) To maintain the looks and functions of your speaker, please make sure to rinse it with fresh water after using it at a swimming pool or the ocean, then dry off all covers and areas where water can gather. The standard for waterproofing is for tap water. Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the surface finish over time if not rinsed off after use.
    Connect Feature Information
    This product is not supported by Connect + or Partyboost on the JBL Portable app. They cannot connect to other portable speakers wirelessly.
    More FAQs
  • Pairing issues with a Computer or PC
    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
    Track Control Information
    To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.
    My device is waterproof, but what about salt water or chlorine water?
    Your JBL speaker is waterproof with IPX7 rating. (IPX7 means it can survive immersion in 1 meter/3.3 feet for up to 30 minutes.) To maintain the looks and functions of your speaker, please make sure to rinse it with fresh water after using it at a swimming pool or the ocean, then dry off all covers and areas where water can gather. The standard for waterproofing is for tap water. Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the surface finish over time if not rinsed off after use.
    Does this speaker have an Aux Input?
    This speaker does not have an Aux Input, so no analog connection is possible.
    More FAQs
  • When I connect my JBL speaker with a computer (PC/Laptop/Apple Mac/Nintendo Switch), can I use the PartyBoost feature?
    The PartyBoost feature is not available when your JBL speaker is connected to a computer via Bluetooth. This is a technical limitation. When connected to a computer, the computer is acting as the primary device. Therefore, the JBL speaker does not have control of re-transmitting the Bluetooth signal to other JBL speakers.

    NOTE: Speakers effected by this are the JBL Flip 5, JBL Flip 6, JBL Charge 5, JBL Pulse 4, JBL Xtreme 3, and JBL Boombox 2, as well as all future products featuring the PartyBoost feature.
  • How to reset Boombox
    In power ON mode press and hold the "Volume +" and "Play" buttons at the same time for more than 3 seconds -> Unit will power Off by itself. Now the unit is reset to factory default.
  • How to Reset

    Resetting the Partybox to Factory Settings

    1. Press and hold "Play" and "Light" buttons for > 10 seconds.
    2. The Partybox will power off and back on and is now reset.
    TWS Mode Capabilities and Restrictions
    You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
    Enabling or disabling Demo mode.

    Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
    Is this Partybox Supported by the JBL Partybox App?
    This model is supported by the JBL Partybox App.
    Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:

    SETTINGS: OTA update | Firmware Version | Quick Start Guide

    REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off

    LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode

    GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode
    More FAQs
  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png
    Does this speaker have an Aux Input?
    This speaker does not have an Aux Input, so no analog connection is possible.
  • How to Reset

    Resetting the Partybox to Factory Settings

    1. Press and hold "Play" and "Light" buttons for > 10 seconds.
    2. The Partybox will power off and back on and is now reset.
    Enabling or disabling Demo mode.

    Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
    Is this Partybox Supported by the JBL Partybox App?
    This model is supported by the JBL Partybox App.
    Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:

    SETTINGS: OTA update | Firmware Version | Quick Start Guide

    REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off

    LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode

    GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode
    PartyBox TWS Information
    It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.

    PartyBox On-The-Go/100:
    Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).

    PartyBox 200/300/1000:
    A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
    In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.
    PBTWS1new.png
    Partybox 110/310/710/Encore/Essential:
    Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).
    PBTWS2.png
    TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
    Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.

    Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310, 710 or Encore/Essential together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.
    More FAQs
  • Does this speaker have an Aux Input?
    This speaker does not have an Aux Input, so no analog connection is possible.
  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png
    Does this speaker have an Aux Input?
    This speaker does not have an Aux Input, so no analog connection is possible.
  • When I connect my JBL speaker with a computer (PC/Laptop/Apple Mac/Nintendo Switch), can I use the PartyBoost feature?
    The PartyBoost feature is not available when your JBL speaker is connected to a computer via Bluetooth. This is a technical limitation. When connected to a computer, the computer is acting as the primary device. Therefore, the JBL speaker does not have control of re-transmitting the Bluetooth signal to other JBL speakers.

    NOTE: Speakers effected by this are the JBL Flip 5, JBL Flip 6, JBL Charge 5, JBL Pulse 4, JBL Xtreme 3, and JBL Boombox 2, as well as all future products featuring the PartyBoost feature.
    JBL Portable App: PC Information
    You cannot download the JBL Portable App on a PC. This app is only available on mobile devices.
    Does this speaker have an Aux Input?
    This speaker does not have an Aux Input, so no analog connection is possible.
  • How to Reset

    Resetting the Partybox to Factory Settings

    1. Press and hold "Play" and "Light" buttons for > 10 seconds.
    2. The Partybox will power off and back on and is now reset.
    TWS Mode Capabilities and Restrictions
    You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
    Enabling or disabling Demo mode.

    Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
    Is this Partybox Supported by the JBL Partybox App?
    This model is supported by the JBL Partybox App.
    Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:

    SETTINGS: OTA update | Firmware Version | Quick Start Guide

    REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off

    LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode

    GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode
    More FAQs
  • How to Reset

    Resetting the Partybox to Factory Settings

    1. Press and hold "Play" and "Light" buttons for > 10 seconds.
    2. The Partybox will power off and back on and is now reset.
    TWS Mode Capabilities and Restrictions
    You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
    Enabling or disabling Demo mode.

    Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
    Is this Partybox Supported by the JBL Partybox App?
    This model is supported by the JBL Partybox App.
    Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:

    SETTINGS: OTA update | Firmware Version | Quick Start Guide

    REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off

    LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode

    GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode
    More FAQs
  • Pairing issues with a Computer or PC
    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
    Playback Time
    This product supports up to 10 hours of audio playtime. Please note that battery life may vary depending on volume level and content. 
    My device is waterproof, but what about salt water or chlorine water?
    Your JBL speaker is waterproof with IPX7 rating. (IPX7 means it can survive immersion in 1 meter/3.3 feet for up to 30 minutes.) To maintain the looks and functions of your speaker, please make sure to rinse it with fresh water after using it at a swimming pool or the ocean, then dry off all covers and areas where water can gather. The standard for waterproofing is for tap water. Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the surface finish over time if not rinsed off after use.
    Connect Feature Information
    This product is not supported by Connect + or Partyboost on the JBL Portable app. They cannot connect to other portable speakers wirelessly.
    More FAQs
  • When I connect my JBL speaker with a computer (PC/Laptop/Apple Mac/Nintendo Switch), can I use the PartyBoost feature?
    The PartyBoost feature is not available when your JBL speaker is connected to a computer via Bluetooth. This is a technical limitation. When connected to a computer, the computer is acting as the primary device. Therefore, the JBL speaker does not have control of re-transmitting the Bluetooth signal to other JBL speakers.

    NOTE: Speakers effected by this are the JBL Flip 5, JBL Flip 6, JBL Charge 5, JBL Pulse 4, JBL Xtreme 3, and JBL Boombox 2, as well as all future products featuring the PartyBoost feature.
    Pairing issues with a Computer or PC
    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
    JBL Portable App: PC Information
    You cannot download the JBL Portable App on a PC. This app is only available on mobile devices.
    What is the procedure to reset Xtreme?
    With the speaker ON, press and hold the VOL+ and Pause/Play buttons for 5-6 seconds. The Xtreme shuts down, and is now reset. You will need to 'forget' the speaker in Bluetooth settings on your phone/tablet in order to pair it again.
    More FAQs
  • Pairing issues with a Computer or PC
    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
    Track Control Information
    To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.
    Does this speaker have an Aux Input?
    This speaker does not have an Aux Input, so no analog connection is possible.
  • TWS Mode Capabilities and Restrictions
    You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
    Enabling or disabling Demo mode.

    Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
    How to Reset to Factory Settings

    Resetting the Partybox to Factory Settings

    1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
    2. The JBL Partybox will power off and back on and is now reset.
    Connecting to your Car
    It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )
    More FAQs
  • TWS Mode Capabilities and Restrictions
    You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
    Enabling or disabling Demo mode.

    Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
    How to Reset to Factory Settings

    Resetting the Partybox to Factory Settings

    1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
    2. The JBL Partybox will power off and back on and is now reset.
    Singing while playing Bluetooth music
    You can have your own Karaoke party with your JBL Partybox. Simply connect your Microphone (only included with the Partybox On The Go) and connect your mobile device over Bluetooth, then start playing music and sing along, it is that simple!
    More FAQs
  • Pairing issues with a Computer or PC
    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
    Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png
  • Does this speaker have an Aux Input?
    This speaker does not have an Aux Input, so no analog connection is possible.

Further Support

Watch & Learn

Have you seen our Youtube channel?

Many of our products have videos introducing them.

Learn more

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +855 15 512 512

NANO SOUND

+855 17 717 885

Email: Rottnaleang@gmail.com

Kfour Group Ltd.

078 88 72 82/ 069 82 87 82

Email: bunarong.kit@kfourgroup.com.kh