JBL LINK VIEW
|Transducer||2 x 51mm (2”) full range driver|
|Output power||2 x 10W RMS|
|5MP front facing camera|
|8” HD touch screen|
|2.4G Wi-Fi transmitter frequency range||2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)|
|2.4G Wi-Fi transmitter power||<20dBm (EIRP)|
|2.4G Wi-Fi modulation||OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM|
|5G Wi-Fi transmitter power||<20dBm (EIRP)|
|5G Wi-Fi modulation||OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM, 256QAM|
|5G Wi-Fi transmitter frequency range||5.15 - 5.35GHz, 5.470 - 5.725GHz, 5.725 - 5.825GHz|
|Note||The integrated display of the JBL Link View allows you to get things done easily. According to the definition of networked equipment with high network availability functionality set out in commission regulation (EU) No 801/2013 amending Regulation (EC) No 1275/2008, the product is considered as a networked equipment with functionality of videophone. Therefore, JBL Link View exempts from the requirements for availability of standby/off modes, power management function and possibility of deactivating wireless network connections, if these requirements are found, it will be inappropriate for the intended use of the product. JBL Link View is in compliance with the European Union energy legislation. JBL Link View is in active standby mode once the device is plugged into a wall socket.|
|Active standby consumption||<4.3 Watts.|
|Trademark||Google is a trademark of Google LLC.|
|Frequency response||60Hz-20kHz (-6dB)|
|Dimensions (W x H x D)||332 x 152 x 100mm|
Control Connect Specifications
|Bluetooth transmitter frequency range||2402 – 2480MHz|
|Bluetooth transmitter power||≤10dBm (EIRP)|
|Bluetooth transmitter modulation||GFSK, π/4 DQPSK, 8DPSK|
|Wireless network||802.11b/g/n/ac (2.4GHz/5GHz)|
Documents & Downloads
Quick Start Guide
What’s in the Box
- 1 x JBL LINK VIEW
- 1 x Power cable
- 1 x Quick start guide
- 1 x Warranty card
FAQs & How-Tos
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.
- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the JBL LINK device is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the JBL LINK Speaker and Google Assistant request.