How To
How To
448 results
-
Three things to know about Bluetooth (BT)…
1. Pairing: Pairing is like creating a new contact in your phone’s Contacts list. You have to do a little bit of work to create the contact, but once you do, connecting with that person in the future is fast and easy.
Let’s put this in terms of phones and speakers (or headphones). Your phone needs to become acquainted with your speaker. This is called pairing.
NOTE: Throughout this article, we will talk about your phone. However, it applies the same to tablets, laptops, computers and any other Bluetooth (BT) source device.To get this started, you have to put the speaker into pairing mode. You may have to press a few buttons to make this happen. All speakers work a little differently, but generally speaking, follow these steps…- For most speakers, quickly press and release the speaker’s BT button. However, with some speakers you may have to press and hold the BT button for a few seconds. Most speakers make a noise or have a blinking LED to let you know they are in pairing mode.
If this does not get you into pairing mode, check your owner’s manual or look for an article pertaining to your specific speaker. - Go into BT settings on your phone. Search or scan for available devices.
- A list of available or discoverable devices will appear on your phone. Select your speaker.
- Two things have just occurred:
- Your phone and speaker are now paired.
- Your phone and speaker are now connected so that you can listen to music.
NOTE: Just as you can have many people in your phone’s Contacts list, you can have many speakers and headphones in your phone’s paired devices list.2. Connecting: Once you have paired, your phone remembers your speaker, and your speaker remembers your phone. However, the two must connect to play music through the speaker.Automatic Re-connection: Let’s say your speaker is at home in the living room, and you leave for the day. When you come home and are within range of the speaker, your phone will automatically re-connect to it (assuming it is turned on). You can press play on your phone, and the music will play though your speaker. Of course, if your speaker is off, you will need to turn it on first. NOTE: Some speakers make a sound when they re-connect.
Automatic re-connection does not always happen.- Some phones may not work like this.
- Someone else may have connected to the speaker.
- Perhaps you connected to a different speaker while outside of your home.
Manual Re-connection: If your device does not automatically re-connect, you can re-connect manually…- Go into Bluetooth settings on your phone and make sure BT is on.
- Select your speaker to re-connect and play music.
Some speakers allow several phones to be connected at the same time. Others allow only one at a time. Therefore, if you are unable to re-connect, it could be that some other phone is connected to the speaker. In this case…- Go into the other phone’s BT settings and disconnect the speaker or turn off BT.
- Then follow the steps above to manually re-connect your phone to the speaker.
NOTE: Do NOT Unpair or Forget the speaker in your phone’s BT settings, as this will require you to repeat the Pairing steps above.
3. Resetting: This is a drastic step and should only be done if the unit is not operating correctly. Do NOT reset your speaker every time you want to connect. Resetting erases all pairings to all phones. You would then have to Unpair or Forget this speaker from each and every phone, and start the pairing process all over again. Check your owner’s manual or look for an article with more detailed BT instructions on your specific speaker or headphone model.Was this helpful? Thank you for your feedback! - For most speakers, quickly press and release the speaker’s BT button. However, with some speakers you may have to press and hold the BT button for a few seconds. Most speakers make a noise or have a blinking LED to let you know they are in pairing mode.
-
A new firmware version has been released for the Boombox 2 (Version 0.4.4.0), below is a list of improvements:
1. Improvements to Bluetooth connection stability.
2. Support for PartyBoost under aux-in connection.
3. Improvements for switching between PartyBoost and Stereo mode.
4. Improvements to firmware update stability with iOS.
5. Improvements to the stability of switching music between aux-in and Bluetooth connection.
The firmware update is installed as an OTA update:
1. Download and install the JBL Portable app from the Google Play/App Store, or simply update the app if you have already downloaded it.
2. Connect your Boombox 2 to your phone/tablet through Bluetooth.
3. Open the JBL Portable app and wait for the Boombox 2 to appear.
4. On the Boombox 2 screen, select settings (gear cog symbol).
5. Proceed with installing the firmware update.Was this helpful? Thank you for your feedback! -
To take a phone call, tap the center button of the right or left ear for 1 second. To hang up a call, tap and hold the center button for 1 second. To ignore a call, tap and hold center button for 3 seconds until music resumes. You may also use the ear buds in MONO or STEREO mode which allows you to make a call or listen to music on either bud independently.Was this helpful? Thank you for your feedback!
-
No, this is not possible. Siri is activated by pressing the play-button for some seconds. Since the play-button on the headphone doubles as on/off button, pressing and holding it will simply turn the headphone off.Was this helpful? Thank you for your feedback!
-
Control Xstream is splash proof (IPX3). Which means that they can be used outside, but they should not be exposed to direct precipitation.Was this helpful? Thank you for your feedback!
-
Yes, if a telephone is connected via Bluetooth to Horizon, this is possible. When adjusting the wake-up timer, there will be an option to select various wake-up tones, or Bluetooth sound. Select Bluetooth as source, while the telephone is playing the music stored locally, or streaming what you want as wake-up music. When the wake-up adjustment is finished, music will be playing over Bluetooth through the Horizon. Press Pause on the source telephone, or press the round selector button (between the two arrow-buttons) on the Horizon to pause the music. Now the system is ready to wake you up with Bluetooth music. When wake-up time arrives, Horizon sends a Play command to the telephone, and music plays via Bluetooth. You can use music that is stored in the phone, use Spotify or play from the cloud. This has been tested with both iPhone 6 and Samsung S6, and should work flawlessly.Was this helpful? Thank you for your feedback!
-
While you have an incoming call, and you can hear the call-tone from your SoundGear, simply adjust the SoundGear's call-tone level to the desired intensity, using the SoundGear's volume buttons.Was this helpful? Thank you for your feedback!
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.Was this helpful? Thank you for your feedback!
-
No, it's not possible to connect simultaneously from multiple devices to the Flip 3 SE. If you need a new device to pair with the Flip 3 SE, please press the Bluetooth button the Flip 3 SE to enable pairing mode. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tabletWas this helpful? Thank you for your feedback!
-
Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.Was this helpful? Thank you for your feedback!
-
No, Soundgear is wireless Bluetooth only, and needs to be charged to play music. But the BTA 20 transmitter must of course be connected with a cable to the signal source.Was this helpful? Thank you for your feedback!
-
To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. The JBL DUETNC headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes!
By using the JBL ONE app, you can change the equalization settings of the soundbar to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful? Thank you for your feedback! -
Yes, the JBL Playlist can be reset to factory settings. First, Power ON the JBL Playlist. Secondly, press and hold the Play and Volume (-) buttons simultaneously for about 10 seconds, and after 10 seconds you should see the Play/Pause and Bluetooth button light up, followed by the speaker going into Standby. Once you see the speaker powers back ON, reset is complete.Was this helpful? Thank you for your feedback!
-
Please note that although the Control Xstream does have a threaded insert for brackets, JBL offers no brackets. Custom made wallmounts should be used.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. Out-the-box the JBL Bar series soundbar recognizes volume and mute controls from the most common TV remote controls. The JBL Bar series has IR learning. You can use this feature to teach the soundbar to response to your TV's remote control as well.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
021-42871228
Jakarta: 021-26538568 Extension 1290/1292
Bandung: 022-4215995
Surabaya: 031-5355111
Makassar: 0411-448381
Bali: 0361-499048, 0361-499035
Mon - Fri - 9:00 a.m 5:00 p.m
Sat: 9:00 a.m 1:00 p.m