How To

Support Overview / How To

How To

448 results
  • What is the difference between the Inspire 500 and the Inspire 700?
    The only difference between the 500 and 700 series is that the 700 model provides you with a charging case. The features and functionality on the actual headphones themselves are the same.
  • What is the difference between the Focus 500 and the Focus 700?
    The only difference between the 500 and 700 series is that the 700 model provides you with a charging case. The features and functionality on the actual headphones themselves are the same.
  • What is the difference between the 10.000 and the 20.000 mAH battery size stated on the box?
    The physical battery in Boombox has a capacity of 10.000mAh @7.4V. This is the charged battery storage. When outputting ( so power from the battery is drawn ), it's using 3.7V, half the storage voltage, which will give you 74Wh - equivalent to a 20.000mAh battery with power stored at 3.7V.
  • What is the difference between Soundgear and Soundgear BTA?
    The difference is the BTA unit, which is a Bluetooth transmitter. The Soundgear BTA comes with the BTA unit in the box. The Soundgear does not. The BTA can be connected (with a signal cable) to a TV set, a CD player, or any other stereo line-level source, and can then stream this signal to the Soundgear wirelessly, via Bluetooth. TV sound or game sound are possible, since the BTA and the Soundgear use aptX Low Latency, which reduces the audio delay to levels, where picture and sound will be closely synchronized. This is also the secret behind the option to connect two Soundgears to one BTA unit, for two people to share a TV transmission, or a video game. Actually, you can use the BTA to stream to most other Bluetooth headphones and loudspeakers, but only if these devices also support aptX LL will the delay be low enough for video use.
  • What is the difference between HDMI 2.0 and HDMI 2.0a?
    You'll have all the benefits from HDMI 2.0, but with 2.0a you will also have HDR (High Dynamic Range). Don't confuse HDR with cameras, this is used for TV's that support HDR content. In short, if a Blu-Ray supports HDR, it can enhanced dark scenes from a movie with this option.
  • What is Dolby Atmos and what does it do?
    Dolby Atmos is a 3D surround sound format.
    Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel. 
    Note: This feature only applies to Dolby Audio content.
    For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos. 
  • What is connect+?
    JBL Connect+ can wirelessly link more than 100 JBL Connect+ enabled speakers together to amplify the party
  • What happens if you have multiple JBL LINK speakers, will all react to "Hey Google" or "OK Google"?
    All speakers are set to react when you use the keywords to interact with Google. To eliminate multiple speakers talking at the same time, using the "Microphone Mute" button will stop the speaker from reacting to the keywords.
  • What else can I do with the QuantumENGINE?
    You can adjust equalizer, RGB LED effects, calibrate Quantum ONE headtracking, change microphone settings and update the headset's firmware.
  • What do the leds indicate on my JBL Boombox?
    Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.
  • What does the Sound Calibration function do?
    The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.
  • What does the Moment button do?
    It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
    Once set up, you can directly access it through the remote control or within the JBL ONE App.
  • What does the Audio Sync function do?
    Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
    You can set the audio delay time between 0 msec and 250 msec.
    Note: The audio delay time you specify may not be exact, depending on the played content.
    The audio sync function will not resolve instances where the video is ahead of the audio.
  • What can you do with JBL QuantumENGINE software?
    You can adjust equalizer, RGB LED effects, change microphone settings and update the headset's firmware.
  • What can I do with the Connect app?
    It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect App
  • What audio codec does the JBL Dive Support?
    The Endurance Dive supports SBC. But the main signal transfer is A2DP, v1.3.
  • What are the two openings at the back of the Soundgear used for?
    These are bass tuning canals, used to provide full sound.
  • What are the sound modes on the JBL Bar Studio, Bar 2.1, Bar 3.1, and Bar 5.1?
    There are 5 sound modes: - Standard - Movie - Music - Voice - Sports Out the box, "Standard" sound mode is the default setting. The display on the soundbar's front panel will show which mode you are in (excluding the Bar Studio) Dotted LED lights on the side of the JBL Studio indicates when sound more your are in, the patterns are as follows: - Standard: One LED dot - Movie: Two LED dots - Music: Three LED dots - Voice: Four LED dots - Sports: Five LED dots
  • What are the key differences between the Bar 2.1 and 3.1?
    The JBL Bar 2.1 has a 6.5" subwoofer, whereas the Bar 3.1 has a 10" subwoofer. The Bar 3.1 has two additional HDMI inputs, support 4K, and has a dedicated tweeter and two woofers to function as the center channel. These added features makes the JBL Bar 3.1 more efficient at producing bass, connecting multiple sources, playing Ultra HD content, and listening to voice/vocals.
  • What are the differences between BAR 2.1 and BAR 2.1 Deep-Bass
    In case you wonder what the differences are between JBL BAR 2.1 and JBL BAR 2.1 Deep Bass, the newest model, then keep reading to find out more!
    Our JBL BAR 2.1 Deep Bass is an improvement to the BAR 2.1.

    Here is what you will get extra:
    1. Improved sound quality.
    2. Deeper and richer bass.
    3. A new modern design change.
    It may not be compelling enough for you to buy it or upgrade your device. However, if you are upgrading, then adding the JBL BAR 2.1 Deep Bass won't disappoint you at all!
  • What are the benefits of having the soundbar connected to WiFi?
    You are able to enjoy wireless streaming via Chromecast and Airplay from your devices. This will also give you the opportunity to do multi-room playback. At the same time, the product will be able to automatically update, when there is software improvements available.
  • What's in the box? 

    Your JBL Quantum 200 includes the headset, a PC audio splitter, QSG l Warranty Card l Warning Card, and a microphone windshield.

  • What's in the box
    Your JBL Quantum 100 includes the headset, a detachable microphone, QSG l Warranty Card l Warning Card, and a microphone windshield.
  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png
  • Voice commands that I registered are not triggering Smartbase.
    • Voice commands only work when receiving a call. • Excessive background noise such as wind or music, could be impacting unit’s effectiveness. Close windows and or reduce the volume of your music and try again.
  • Voice Assist Information
    To activate the voice assistance, press and hold the center button on the RIGHT ear for 2 seconds until you hear your music stop. You will be able to speak to VA through your headphones and it should comply with your command.
     
  • Using the USB Connection
    The USB port is only for charging the JBL Quantum 350 Wireless.
    Connect the dongle to use the 2.4GHz wireless connection.
  • Using Quantum DUO with our QuantumENGINE software
    Unfortunately, our JBL Quantum DUO speakers are not supported by our QuantumENGINE PC software.
    All configuration is done on the speakers itself, and there is no need or required software to change the RGB lights.
  • USB connection with Quantum Duo and headphones
    Please avoid the use of USB splitters and extenders built into screens etc. Dropouts in sound and lack of signal from the microphone in headsets may be the result. If possible, always connect directly to the computer, or use a single extension cord.
  • Unit does not power up when power button is pressed?
    Press and hold the power button for 3-5 seconds, it will power on/off the TRIP. Short press on the power button will lock and unlock top capacities touch buttons on the TRIP. Be sure to hold the button for 3-5 seconds to ensure you are powering on/off and not controlling the touch buttons.
< 1 2 3 4 5 6 ... 16 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: 021-42871228

Jakarta: 021-26538568 Extension 1290/1292
Bandung: 022-4215995
Surabaya: 031-5355111
Makassar: 0411-448381
Bali: 0361-499048, 0361-499035

Mon - Fri - 9:00 a.m 5:00 p.m
Sat: 9:00 a.m 1:00 p.m