|Sound system||7.1.4 channel|
|Power supply||100 - 240V AC, ~ 50/60Hz|
|Networked standby power||< 2.0W|
|Operating temperature||0°C - 45°C|
|Total speaker power output (Max @THD 1%)||880W|
|Soundbar output power (Max @THD 1%)||440W|
|Surround speaker output power (Max @THD 1%)||2x 70W|
|Subwoofer output power (Max. @THD 1%)||300 W|
|Soundbar transducer||5x (46x90)mm racetrack drivers, 3x 0.75" (20mm) tweeters, 2x 2.75" (70mm) up-firing full-range drivers|
|Surround speaker transducer||0.75" (20mm) tweeters, 2.75" (70mm) up-firing full-range drivers|
|Subwoofer transducer||10” (260mm)|
|Frequency response||33Hz - 20kHz (-6dB)|
|Audio inputs||1 Optical, Bluetooth, USB (USB playback is available in US version. For other versions, USB is for Service only.)|
|Total soundbar dimensions (W x H x D)||1194 x 56 x 125mm / 47" x 2.2" x 4.9"|
|Main soundbar dimensions (W x H x D)||884 x 56 x 125 mm / 34.8" x 2.2" x 4.9"|
|Detachable surround speaker dimensions (each) (W x H x D)||155 x 56 x 125 mm / 6.1" x 2.2" x 4.9"|
|Subwoofer dimensions (W x H x D)||305 x 440.4 x 305 mm / 12" x 17.3" x 12"|
|Soundbar weight||3.7 kg / 8.2 lbs|
|Detachable surround speaker weight (each)||1.4kg / 3.1 lbs|
|Subwoofer weight||10 kg / 22 lbs|
|Packaging dimensions (W x H x D)||1000 x 375 x 475 mm/ 39.4" x 14.8" x 18.7"|
|Packaging Weight||19.4 kg / 42.7 lbs|
Control Connect Specifications
|USB port||Type A|
|USB rating||5V DC, 0.5A|
|Supporting file format||MP3|
|MP3 codec||MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3|
|MP3 sampling rate||16 - 48 kHz|
|MP3 bitrate||80 - 320 kpbs|
|Bluetooth profile||A2DP 1.2, AVRCP 1.5|
|Bluetooth transmitter frequency range||2400MHz – 2483.5MHz|
|Bluetooth transmitter power||<15dBm (EIRP)|
|Wi-Fi network||IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz)|
|2.4G Wi-Fi transmitter frequency range||2412 - 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 channels)|
|2.4G Wi-Fi transmitter power||< 20dBm (EIRP)|
|5G Wi-Fi transmitter frequency range||5.15 - 5.35GHz, 5.470-5.725GHz, 5.725 - 5.825GHz|
|5G Wi-Fi transmitter power||5.15-5.25GHz <23dBm, 5.25-5.35GHz & 5.47-5.725GHz <20dBm, 5.725-5.825GHz <14dBm (EIRP)|
|2.4G wireless frequency range||2406 - 2474MHz|
|2.4G wireless power||＜10dBm (EIRP）|
Documents & Downloads
Quick Start Guide
Declaration of Conformity
Firmware update for JBL Bar 800 and JBL Bar 1000 Version 18.104.22.168.00 (Global, Excluding China)
JBL Bar 1000 Tech Backgrounder
Firmware update for JBL Bar 800 and JBL Bar 1000 Hotfix Version 22.214.171.124.00 (Japan only)
Firmware update for JBL Bar 1000 Hotfix Version 23.05.43.80.00 (Japan only)
Firmware update for JBL Bar 800, Bar 1000 and Bar 1300 OTA1 Version 126.96.36.199.00
Firmware update for JBL Bar 800 and JBL Bar 1000 Hotfix Version 188.8.131.52.00
JBL Global Warranty Card
What’s in the Box
- 1x Main soundbar
- 2x Detachable wireless surround speakers
- 1x Wireless subwoofer
- Remote control with 2 x batteries
- Power cords (up to 8pcs depending on region SKUs)
- 1 x HDMI cable
- 2 x L-shape wall-mount bracket (main bar) + 2 x U-shape wall-mount bracket (for surround speakers) kit with screws
- 4 x Side caps
- Quick start guide
- Safety instruction and Warranty card
- Wall mount template
FAQs & How-Tos
NOTE: Apple IOS users are not able to find their MAC address in Google Home app due to privacy policies in the USA and European market.We advise setting up your device on a less secure network. Log into the router and retrieve the MAC address for your device then add it to your preferred network.
Instructions below are for Android only
- Open your Google Home app
- Enable Bluetooth on your device.
- Enable Location service on your Android device.
- Remember to "Allow" Google Home to view your location while using the app (You are asked during setup of the Google Home app).
- In case you denied access go to Settings Apps Google Home Permissions Allow to view Location.
- When you at selecting the Wi-Fi network from the list of available networks, before tapping on your network you need to get the MAC address.
- Tap the located top right corner.
- In the pop-up menu press "Show MAC address" Write down the MAC Address.
You can now add the MAC address to your local Wireless router or system if your configuration requires this before installing the device on your network.
Finding the MAC address after speaker is installed
- Open your Google Home app .
- Tap on to view your home.
- Find your room .
- In the top right corner tap Settings icon .
- Scroll down to the bottom of the screen. You will see some system information and the MAC address as well.
(2) To enter the subwoofer pairing mode on the soundbar, press and hold the bass button on the remote control for more than three seconds. Then, press VOL - on the remote control.
On the soundbar LED display:
→ "SUB PAIRING": The subwoofer is ready for pairing.
→ "SUB PAIRED": The subwoofer is connected.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.
- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the JBL LINK device is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the JBL LINK Speaker and Google Assistant request.
Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel.
Note: This feature only applies to Dolby Audio content.
For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos.