JBL OnStage IV

JBL OnStage IV

Loudspeaker dock for iPod and iPhone devices

Được bán từ 2010 đến nay

Tài liệu & Tải xuống

Thông số sản phẩm

Apple 30-pin
Power Output
2 x 10W
Available Finishes
Black
Series
On Stage
Power Consumption
20W
Input Impedance
5k ohms
Signal-to-Noise Ratio
70dB
Frequency Response
110Hz – 20kHz
Height (mm)
68
Depth (in)
8-1/4
Height (in)
2-11/16
Weight (lb)
1.6
Weight (kg)
0.7
Width (mm)
210
Depth (mm)
210
Width (in)
8-1/4
Liquid-Crystal Display
No
Transducer
Four x 1-inch (25mm) JBL Odyssey transducers

Share your music easily – and with power and style. The JBL On Stage® IV has dual JBL® Odyssey® full-range transducers with 2 x 12-watt amplification and computer-optimized digital signal processing (DSP) equalization. The sound floods virtually any room or outdoor space with true-to-life JBL sound. You’ll get impressive frequency response (110Hz – 20kHz) with minimal distortion even at high volumes. Anywhere the party is, you’ll have music with accuracy and detail that’s a big surprise from something so small. Four AAA batteries keep you going for hours. You’ll get an IR remote control and a USB cable that syncs and charges your iPod or iPhone device. Why wouldn’t you want it?

JBL On Stage® IV is compatible with all docking iPod devices, including the iPod Nano G3, iPod classic, the iPod Touch ? all iPhone devices. You can also connect to a wide variety of electronic devices – mobile phones, CD players, computers – with a stereo mini-jack output.
Four Odyssey® transducers produce four octaves of full-spectrum sound. With an impressive frequency response of 70Hz – 20kHz, these stiff, lightweight drivers feature computer-optimized equalization, which uses digital signal processing (DSP) to create a 360-degree soundstage.
When you want to take the JBL On Stage® IV on the go, six AAA batteries will give you up to 16 hours of playback.
The JBL On Stage® IV recalls previous settings when turned on. A touch increases or decreases volume, mutes, unmutes. It has an IR remote which lets you browse iPod or iPhone device songs, photos and playlists as well as change tracks and settings and more from 15 feet (4.6m) away.
Evercharge topology means your iPod or iPhone device is always charging even if the system is off. Just plug into AC power. The JBL On Stage® IV also has a USB input, connecting you to your iTunes library in order to sync your latest songs – without removing it from the dock.
You can still receive iPhone calls even while you’re listening to music. Just answer the call. Your music stops, then starts playing again when you hang up.
Use nearly any portable or desktop device with JBL On Stage® IV. You can connect to “non-Apple” products, such as mobile phones, CD players and desktop and laptop computers (all platforms) with the included auxiliary input.
Featuring the dynamic, new JBL Weave design, the JBL On Stage® IV is as good as it sounds: It’s sculpted with swooping, high-gloss pieces and a dramatic, see-through cradle that is backlit. It stands out from the crowd ? and so will you.
Just a touch on the brushed-metal controls increases or decreases the volume. The system also includes an IR remote control that lets you browse iPod or iPhone songs, photos and playlists as well as change tracks and settings and more from across the room.

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi