



JBL Partybox 110
Mang đến một không gian hoàn toàn mới cho bất kỳ bữa tiệc nào với hệ thống chiếu sáng LED động độc đáo, được đồng bộ hóa với âm thanh mạnh mẽ và âm trầm sâu lắng của PartyBox 110. Mang PartyBox đi bất cứ đâu với thiết kế kháng nước cùng cổng cắm guitar và mic để có trải nghiệm đắm chìm tột đỉnh. Với tính năng Bass Boost và Âm thanh JBL Original Pro uy lực, mạnh mẽ, bạn sẽ không chỉ nghe thấy âm nhạc say đắm, mà còn được feel nhạc suốt 12 giờ cho bữa tiệc luôn sôi động dù ngày hay đêm. Quyền năng tùy chỉnh âm thanh bạn yêu nhờ ứng dụng PartyBox.
Thông số sản phẩm
General Specifications
Thời gian chơi nhạc tối đa (giờ) | 12 |
---|---|
Công suất đầu ra (W) | 160 |
Audio Specifications
Dải đáp ứng tần số động (Hz) | 45Hz - 20KHz (-6dB) |
---|
Dimension Specifications
Kích thước (cm) | 29.5 x 56.8 x 30.0 |
---|---|
Kích thước (in) | 11.6 x 22.4 x 11. 8 |
Trọng lượng (kg) | 10.84 |
Trọng lượng (lbs) | 23 |
Control Connect Specifications
Cấu hình Bluetooth | A2DP 1.3, AVRCP 1.6 |
---|---|
Tần số Bluetooth | 2.4 GHz - 2.4835 GHz |
Module phát Bluetooth | GFSK, π/4 DQPSK, 8DPSK |
Công suất phát Bluetooth | ≤ 15 dBm (EIRP) |
Phiên bản Bluetooth | 5.1 |
Tài liệu & Tải xuống
Bảng thông số
Sách hướng dẫn
Hướng dẫn nhanh
Bộ sưu tập













Video
Có cái gì trong hộp vậy
- 1x JBL PartyBox 110
- 1x Dây nguồn AC (Số lượng dây nguồn thay đổi theo khu vực)
- 1x Hướng dẫn nhanh
- 1x Bảng an toàn
- 1x Thẻ bảo hành

Câu hỏi thường gặp & How-Tos
Does my Speaker have Speakerphone/Voice Assistant Functionality?
This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Partybox 110 - Firmware Version 1.28.0/Partybox 310 - Firmware Version 1.32.0
What’s New:
The new Software version will enable Party mode across PartyBox 310 & PartyBox 110 series.
Stereo mode will still only work when 2 PartyBoxes of the same model are connected.
The new Software version will enable Party mode across PartyBox 310 & PartyBox 110 series.
Stereo mode will still only work when 2 PartyBoxes of the same model are connected.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Is this Partybox Supported by the JBL Partybox App?
This model is supported by the JBL Partybox App.
Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:
SETTINGS: OTA update | Firmware Version | Quick Start Guide
REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off
LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode
GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode
Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:
SETTINGS: OTA update | Firmware Version | Quick Start Guide
REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off
LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode
GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode
Có hữu ích không?
Cảm ơn phản hồi của bạn!
TWS Mode Capabilities and Restrictions
You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710.
It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300.
If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers.
If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker.
Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
PartyBox TWS Information
It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.
PartyBox On-The-Go/100:
Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).
PartyBox 200/300/1000:
A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.

Partybox 110/310/710/Encore/Essential:
Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).

TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.
Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310, 710 or Encore/Essential together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.
PartyBox On-The-Go/100:
Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).
PartyBox 200/300/1000:
A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.

Partybox 110/310/710/Encore/Essential:
Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).

TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.
Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310, 710 or Encore/Essential together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
PARTYBOX 110: Software Update Release Notes
PARTYBOX 110
Software Update Release Notes
------------------------------------------------------------------------
Version: 1.35.0
Release Date: September 19, 2022
Release Media: OTA (over the air) Automatic Upgrade
What's New
Software Update Release Notes
------------------------------------------------------------------------
Version: 1.35.0
Release Date: September 19, 2022
Release Media: OTA (over the air) Automatic Upgrade
What's New
Added the device analytics function. Now users can share data regarding how they are using the product.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
How to Reset
Resetting the Partybox to Factory Settings
- Press and hold "Play" and "Light" buttons for > 10 seconds.
- The Partybox will power off and back on and is now reset.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Không tìm được thứ bạn cần?
Gọi cho chúng tôi
Nói chuyện với chuyên gia về sản phẩm
(08:30 - 18:00)
Gửi email cho chúng tôi
365 ngày một năm
Chúng tôi sẽ trả lời trong vòng một ngày làm việc.