ON AIR WEM 1
Surrounding yourself with sound doesn’t have to mean wires everywhere and more holes in your walls, floors or ceilings. The JBL® WEM-1 sets your speakers free. It has a 50-watt-per-channel amplifier and receives crisp signals from 70 ft away. Its optimal-performance, proprietary system delivers JBL sound in an easy-setup, clutter-free system.
Thông số sản phẩm
General Specifications
| Included Mounting Hardware | 1 Front |
|---|---|
| Series | Wireless |
Audio Specifications
| Audio Frequency Range | (+0dB, –1dB) 20Hz – 20kHz |
|---|---|
| Amplifier Power Output | 50 per channel |
| Audio Sensing Turn-On/Turn-Off | Standby mode after approximately 10 minutes, when no signal is detected from your system. The WEM-1 will then power on instantly when a signal is detected. |
| Signal-to-Noise Ratio | 80dBA |
Dimension Specifications
| Receiver Module Width (in) | 6-3/16 |
|---|---|
| Transmitter Module Width (in) | 6 |
| Receiver Module Depth (mm) | 116 |
| Receiver Module Width (mm) | 158 |
| Receiver Module Weight (lb) | 0.9 |
| Receiver Module Height (in) | 1-1/8 |
| Receiver Module Depth (in) | 4-5/8 |
| Transmitter Module Weight (kg) | 0.3 |
| Transmitter Module Depth (in) | 3-7/8 |
| Transmitter Module Height (in) | 1-1/8 (3-3/4 high with antenna extended) |
| Receiver Module Weight (kg) | 0.4 |
| Receiver Module Height (mm) | 29 (95 high with antenna extended) |
| Transmitter Module Weight (lb) | 0.6 |
Wireless System Specifications
| RF Operating Range | Up to 70' (22m), depending upon conditions |
|---|---|
| RF Operating Frequency | 2.4GHz |
| Adjustable EQ | 6 Settings |
| Selectable RF Channel | Rear |
Control Connect Specifications
| Speaker Output Connections | 1 Rear |
|---|---|
| Subwoofer Output Connection | 1 Rear |
| Speaker-Level Input Connections | 1 Rear |
Tài liệu & Tải xuống
Bảng thông số
Có cái gì trong hộp vậy
- (1) Receiver-amplifier module
- (1) 6' (1.8m) audio stereo cable RCA-RCA
- (1) Wall-mount bracket for transmitter
- (2) Panhead M3s, (4) machine screws for wall-mount bracket to transmitter
- (1) USA warranty sheet
- (1) Owner's Manual
- (1) Transmitter module
- (1) 120V AC power cord for receiver-amplifier power supply, (1) 230V AC power cord for receiver-amplifier power supply - Shuko plug, (1) 230V AC power cord for receiver-amplifier power supply - UK plug
- (2) Wall-mount brackets for receiver
- (1) Handheld remote control
- (1) Pedestal to be attached on receiver's left side if it is used vertically
- (1) 120V AC power cord for transmitter power supply, (1) 230V AC power cord for transmitter power supply - Shuko plug, (1) 230V AC power cord for transmitter power supply - UK plug
- (1) Power supply for transmitter
- (4) Small, round, self-adhesive feet - to be attached on transmitters left side panel if transmitter is used vertically
Không tìm được thứ bạn cần?
Gọi cho chúng tôi
Nói chuyện với chuyên gia về sản phẩm
(08:30 - 18:00)
Gửi email cho chúng tôi
365 ngày một năm
Chúng tôi sẽ trả lời trong vòng một ngày làm việc.