JBL LIVE 500BT - White - Your Sound, Unplugged - Hero JBL LIVE 500BT - White - Your Sound, Unplugged - Front JBL LIVE 500BT - White - Your Sound, Unplugged - Detailshot 1
JBL LIVE 500BT - White - Your Sound, Unplugged - Hero
  • JBL LIVE 500BT - White - Your Sound, Unplugged - Swatch Image
  • JBL LIVE 500BT - Blue - Your Sound, Unplugged - Swatch Image
  • JBL LIVE 500BT - Green - Your Sound, Unplugged - Swatch Image
  • JBL LIVE 500BT - Red - Your Sound, Unplugged - Swatch Image
  • JBL LIVE 500BT - Black - Your Sound, Unplugged - Swatch Image

JBL LIVE 500BT

Đối với bạn âm nhạc và chất âm tuyệt vời chính là điều quan trọng nhất, vậy thì LIVE500BT chính là tai nghe không dây dành cho bạn, được trang bị driver lên đến 50mm kèm công nghệ JBL Signature Sound với khả năng khuếch đại âm Bass giúp cho những bài hát thêm sống động và thú vị. Dễ dàng truy cập trợ lý ảo Google chỉ bằng một thao tác chạm nhẹ vào tai nghe, giúp bạn thuận tiện hơn khi nghe nhạc, gọi điện và còn nhiều chức năng nữa mà không cần phải đụng đến điện thoại. Chưa hết, LIVE500BT còn có chức năng Ambient Aware và TalkThru giúp bạn luôn nhận biết và liên lạc với môi trường xung quanh, khi giờ đây chúng ta có thể trò chuyện mà không cần phải tháo tai nghe ra. LIVE500BT nhẹ và rất thoải mái khi đeo nhờ chất liệu đệm mềm, tận hưởng 30h phát nhạc liên tục và chỉ mất 2h để sạc đầy. LIVE500BT đã sẵn sàng "ROCK" cùng bạn cả ngày dài năng động.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 50.0

Audio Specifications

Độ nhạy của driver ở 1kHz / 1mW (dB) 108dB SPL@1kHz/Pa
Dải đáp ứng tần số động (Hz) 18Hz - 20Hz
Trở kháng (ohms) 32.0
Số lượng driver trên mỗi tai 1.0

Dimension Specifications

Chiều dài cáp tai nghe (cm) 133.4
Chiều dài cáp tai nghe (ft) 4.38
Trọng lượng (g) 231.6
Trọng lượng (oz) 8.51

Control Connect Specifications

Cấu hình Bluetooth A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2
Tần số Bluetooth 2.402 – 2.480GHz
Module phát Bluetooth GFSK, π/4 DQPSK, 8DPSK
Công suất phát Bluetooth 0-4 dbm
Phiên bản Bluetooth 4.2
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • 1 x LIVE500BT
  • 1 x Aux Cable
  • 1 x Charging Cable
  • 1 x Warranty/Warning
  • 1 x QSG/Safety Sheet
JBL LIVE 500BT - What's in the Box

Câu hỏi thường gặp & How-Tos

What is the range of JBL LIVE headphones? How far can I go from the source device, while listening to my JBL LIVE headphones?
The range is approximately 10 meters, depending on the environment.
Can I use both Amazon Alexa and the Google Assistant with my JBL LIVE headphones?
Yes, both voice assistants are supported by the JBL LIVE headphones.
Amazon Alexa or Google Assistant must be selected as the default voice assistant through the My JBL Headphones app.
The two voice assistants cannot be used simultaneously. You can always change your default voice assistant through the My JBL Headphones app.
Can my headphones be connected to two devices simultaneously?
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
How do I use Amazon Alexa with my headphones?
Why can I not use Google Assistant in my country?

-       The Google Assistant isn’t available in certain languages and countries. For countries without Google Assistant, you can double tap the left ear cup on the headphone to activate the native voice assistant on your mobile device.

I cannot activate my voice assistant when touching the dedicated button.
Please check that Google Assistant or Amazon Alexa are installed on your device.
Try to repeat the setup process.
Also, switching the headphones off and on once or twice may solve the problem.
Waterproof Information
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.
Why can I not use Amazon Alexa in my country?

-       Alexa is not available in all languages and countries. For countries without Amazon Alexa, you can double tap to activate the native voice assistant on your mobile device.

How do I connect my JBL LIVE headphones to my device via Bluetooth?
To pair the JBL LIVE headphones the first time, switch the headphone on, look for the blinking blue light indicating pairing mode. Switch on Bluetooth on your source device, find the JBL LIVE headphones in Settings > Bluetooth and confirm pairing. To pair the JBL LIVE headphones from the second time onwards, or to link them with a different device, press and hold the power button until the blue flashing light is visible. 
My JBL Headphones App Support
This headphone is supported by the My JBL Headphones App.
How to use Google Assistant with your headphones
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Trigger Google - #1 FAQ.png
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: 
https://assistant.google.com/platforms/phones/#headphones

Get your notifications
Double-tap the Action button.

Stop your Google Assistant
Touch the Action button.

Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

 
Multi-Point Connection Support
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.

To connect to two devices at the same time:

1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection. 
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.

(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)


 
How to connect your headphones to the Google Assistant for iOS devices
Visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

Step 1

  Set up Google Assistant #1.png
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:

Step 2

Set up Google Assistant #2.png

PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
  Set up Google Assistant #3.png
Set up Google Assistant #4.png
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

How to switch between voice assistants using the My JBL Headphone app
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

Switching between voice assistant #1.png

You can change the default assistant in the ‘My JBL Headphones’ app:
  1. Open the My JBL Headphones app on your device.
  2. Select the headphones you are connected too.
  3. Go to Settings by clicking the symbol in the top right corner.
  4. Select Voice Assistant.
  5. Now you can select your preferred voice assistant.
Switching between voice assistant #2.png

Your headphones may restart after switching Voice Assistant.
How do I connect my headphone to Amazon Alexa on my device (iOS and Android)?

-       Visit App store and download ‘Amazon Alexa’ App.

Can I use the Voice Assistants without internet?

-       No, your Voice Assistant operates in the cloud and needs to be connected to the internet. .

How to connect your headphones to the Amazon Alexa for Android and iOS devices
Visit the App Store and download the ‘Amazon Alexa’ App.

  Set up Amazon Alexa #1.png
  1. Click the Plus(+) button on the top right of the screen.
  2. Then select ‘Add Device‘.
  3. Select headphones from the list and then choose your Headphones from the list of available devices.
  4. Follow the rest of the instructions in the Alexa App to complete the setup.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
How do I reset my JBL headphones?
With the headphones switched ON, press and hold both volume buttons for more than 5 seconds.
Your headphones are now reset to factory status.
 
What is a voice assistant?
Voice assistants from Google and Amazon utilize artificial intelligence to quickly answer questions, communicate hands-free and provide notifications among many other helpful benefits. 
Trouble accessing the Google Assistant or Amazon Alexa on your Headphone
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.
I cannot activate my voice assistant when touching the dedicated button.
Please check Google Assistant or Amazon Alexa are installed on your device. Try to repeat the setup process. Also, switching the headphones off and on once or twice may solve the problem.

Please note that these services can only be activated from the earphone's buttons when the headphones are connected via Bluetooth. Buttons on a cabled remote cannot be used for this purpose.
How to use Amazon Alexa with your headphones
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Can I place or answer telephone calls with my JBL LIVE headphones?
Yes, you can use them for telephone conversations in both Bluetooth and wired mode when paired with a smart device. 
How do I use the Google Assistant with my headphones?



-       For more information on what your Google Assistant can do, visit: assistant.google.com/platforms/headphones
 

Can I disable Voice function?
Yes, there are two ways to disable the voice assistant feature.
1) double tap the left ear cup, or 2) In the My JBL Headphones app, de-select both assistants.
aptX Audio Codec Support
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
How to connect your headphones to the Google Assistant for Android devices
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

Step 1

  Set up Google Assistant #5.png
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:

Step 2

Set up Google Assistant #2.png

PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Set up Google Assistant #3.png
Set up Google Assistant #4.png

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi