JBL Tune 660NC - Pink - Wireless, on-ear, active noise-cancelling headphones. - Hero JBL Tune 660NC - Pink - Wireless, on-ear, active noise-cancelling headphones. - Front JBL Tune 660NC - Pink - Wireless, on-ear, active noise-cancelling headphones. - Detailshot 1
JBL Tune 660NC - Pink - Wireless, on-ear, active noise-cancelling headphones. - Hero
  • JBL Tune 660NC - Pink - Wireless, on-ear, active noise-cancelling headphones. - Swatch Image
  • JBL Tune 660NC - Black - Wireless, on-ear, active noise-cancelling headphones. - Swatch Image
  • JBL Tune 660NC - Blue - Wireless, on-ear, active noise-cancelling headphones. - Swatch Image
  • JBL Tune 660NC - White - Wireless, on-ear, active noise-cancelling headphones. - Swatch Image

JBL Tune 660NC

With the Tune 660NC Noise Cancelling headphones, you'll get great sound, noise-free! Enjoy JBL Pure Bass Sound for up to 44 hours with ANC on and then recharge in a flash (just 5 minutes for 2 extra hours of battery). Out of juice? Just plug in the additional detachable cable keep the flow going. Immediately pair the JBL Tune 660NC to your Android device thanks to Fast Pair enabled by Google. Then, use the handy buttons on the ear cup to control sound and calls and leave your device in your pocket. Choose the color that best suits your mood. Super light and flat foldable, they'll fit anywhere and be ready to light up your day.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 32

Audio Specifications

Độ nhạy của driver ở 1kHz / 1mW (dB) 100
Dải đáp ứng tần số động (Hz) 20Hz-20kHz
Trở kháng (ohms) 32

Dimension Specifications

Trọng lượng (g) 166
Trọng lượng (oz) 5.9
Chiều dài cáp sạc (m) 0.2
Chiều dài cáp sạc (ft) 0.7
Chiều cao bên ngoài của chụp tai (in) 2.9
Chiều rộng bên ngoài của chụp tai (in) 2.9
Chiều cao bên trong của chụp tai (in) 1.3
Chiều rộng bên trong của chụp tai (in) 1.3
Độ sâu chụp tai (in) 0.7
Chiều cao bên ngoài của chụp tai (cm) 7.3
Chiều rộng bên ngoài của chụp tai (cm) 7.3
Chiều cao bên trong của chụp tai (cm) 3.2
Chiều rộng bên trong của chụp tai (cm) 3.2
Độ sâu chụp tai (cm) 1.7
Chiều dài cáp âm thanh (ft) 3.9
Chiều dài cáp âm thanh (m) 1.2

Control Connect Specifications

Cấu hình Bluetooth A2DP v1.3, AVRCP v1.5, HFP v1.6
Tần số Bluetooth 2.402 GHz-2.480 GH
Phiên bản Bluetooth 5.0
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • 1 x Tune 660NC
  • 1 x USB Type-C charging cable
  • 1 x Audio cable
  • 1 x Quick Start Guide / Safety Sheet (S / i)
  • 1 x Warranty / Warning (W / !)
JBL Tune 660NC - What's in the Box

Câu hỏi thường gặp & How-Tos

Voice Assistant Headphone Connection
Can my headphones be connected to two devices simultaneously?
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Pairing issues with a Smartphone or Tablet
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi