JBL EVEREST™ 310 - Purple - Wireless On-ear headphones - Hero JBL EVEREST™ 310 - Purple - Wireless On-ear headphones - Front JBL EVEREST™ 310 - Purple - Wireless On-ear headphones - Detailshot 1
JBL EVEREST™ 310 - Purple - Wireless On-ear headphones - Hero
  • JBL EVEREST™ 310 - Purple - Wireless On-ear headphones - Swatch Image
  • JBL EVEREST™ 310 - Silver - Wireless On-ear headphones - Swatch Image
  • JBL EVEREST™ 310 - Gun Metal - Wireless On-ear headphones - Swatch Image
  • JBL EVEREST™ 310 - Brown - Wireless On-ear headphones - Swatch Image

JBL EVEREST™ 310

Đặt lên tai dòng tai nghe JBL Everest 310 và đắm chìm vào trải nghiệm âm thanh với công nghệ kết nối không dây suốt 20 giờ liền đem đến cảm giác bùng nổ cùng âm thanh huyền thoại JBL Pro Audio. Công nghệ Share Me 2.0 cho phép bạn kết nối và chia sẻ nhạc của mình với bạn bè qua Bluetooth. Khả năng sạc nhanh trong 2 giờ, thiết kế gập phẳng đẹp mắt và hộp đựng cứng nhỏ gọn giúp chiếc tai nghe này trở thành người bạn đồng hành hoàn hảo cho lối sống bận rộn của bạn. Một micrô tích hợp tạo điều kiện cho các cuộc gọi rảnh tay rõ ràng và điều khiển dễ dàng trên tai nghe cho phép bạn điều khiển âm nhạc của mình.Tai nghe có 4 màu kim loại, những tai nghe này đặt niềm đam mê và cuộc sống của bạn.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 40.0

Audio Specifications

Độ nhạy của driver ở 1kHz / 1mW (dB) 96dB
Dải đáp ứng tần số động (Hz) 10Hz-22kHz
Trở kháng (ohms) 32.0
Số lượng driver trên mỗi tai 1.0

Dimension Specifications

Trọng lượng (oz) 8,32

Control Connect Specifications

Cấu hình Bluetooth HFP v1.7, HSP v1.2, A2DP v1.3, AVRCP v1.6
Tần số Bluetooth 2.402GHz-2.48GHz
Module phát Bluetooth GFSK,π/4DQPSK, 8DPSK
Công suất phát Bluetooth 0-4 dbm
Phiên bản Bluetooth 4.1
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • Tai nghe
  • Cáp điều khiển có thể tháo rời
  • Cáp sạc
  • Hộp đựng
  • Phiếu cảnh báo
  • Phiếu bảo hành
  • Hướng dẫn an toàn
  • QSG
JBL EVEREST™ 310 - What's in the Box

Câu hỏi thường gặp & How-Tos

How do I reset my JBL Everest 310, 710 and 750 Elite headphones?
With the headphones switched ON, press VOLUME + and VOLUME - , and hold them for 5 seconds. Your headphones are now reset to factory settings. This is true for Everest 310, 710, Elite 750, 310GA and 710GA.
Are the materials used in the Everest 310/710 headphones real leather?
No. Our Everest series headphones are made with synthetic protein non-animal leather.
Do the normal BT models have voice prompt, or can it be changed?
Yes , all 5 models have voice prompts. The Elite models have the added option of turning off the voice prompts in the settings menu of the app. The Everest 300 and 700, as well as the successors 310 and 710, have the option of choosing between voice prompts and tone prompts. This is how you do it: Switch the headphones ON. Press and hold the Shareme and the Volume Plus buttons for about two seconds. Switch the headphones OFF. You will now hear the OFF prompt having changed to the prompt you did not use before, and you will hear this one until you change it again.
How does ShareMe work?
For models E40BT and E50BT Connect the first headphone by BT to your mobile device Tap the ShareMe button once Tap the ShareMe button on the 2nd headphones twice ( ! ) The headphones will connect to each other. When changing volume on source device, or BT connected headphones, the volume will only change on THAT headphone ( and in some cases the source device, like iOS devices and newer Android ), not on the one connected via ShareMe. When changing volume on a via-ShareMe-connected headphone ( 2nd ), it will not change volume on source device, or on the BT-connected headphone. To sum up, both headphones have their individual volumes. For Everest models ( not ELITE ). Connect the headphones by BT to your mobile device Put the 2nd device ( speaker, headphones as long as they have Bluetooth ) in "BT discovery mode" Press the ShareMe button on the Everest headphone ( button marked with a little "s" ) The Everest will connect to BT device. (Please note that you may not be able to pair from the Everest to the Everest Elite models, or if you can pair, you may have dropouts in sound). When changing volume on source device, or Everest, the volume will only change on the Everest ( and in some cases the source device, like iOS devices and newer Android ), not on the device connected via ShareMe. When changing volume on via-ShareMe-connected BT device ( 2nd ), it will not change volume on source device or Everest. Please note that it is NOT possible to use ShareMe if you are listening to analog signal via cable. Bot the E-series and the Everest models will switch off the Bluetooth circuits as soon as you insert the audio cable, so re-transmission is not possible.
Can these headphones be used as a chat gaming headset?
The Everest product uses standard Bluetooth protocol for audio communication. Gaming headphones usually use a different frequency and protocol for audio communication.
How can the headphones be restored to factory default?
Switch the headphone ON, then press both volume buttons (VOL + and VOL-) at the same time, and hold them for 5-6 seconds. The headphones are now reset to factory default.
Can I connect to multiple devices at the same time on the Everest 310/710 headphones?
To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.
Do the Everest Series headphones support AAC or aptX?
Sorry, neither AAC nor aptX are supported.
Can I replace the ear pads on the Everest 310/710 headphones?
No, the pads are glued to the headphone body, and must be replaced by a service technician.
How do I power on and pair the Everest 310/710 headphones?
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.
Does the audio cable on the Everest 310/710 feature volume control?
No the audio cable included with the Everest series headphones is a one button microphone that features pause/play, track control and gives you the ability to answer and hang up phone calls. You are able to control the volume when the headphones are connected through bluetooth.
Are the Everest 310, 710, 750 ear pads replaceable by owner?
The ear pads on the three second-generation Everest headphones are fixed to a plastic plate, held in place on the ear pods with small claws. It is not very easy to remove it, and sometimes one or more of the claws may break off. This means that it is usually best to have a service technician do the replacement, but if you have new pads at hand, and is handy with tools, you may do it yourself.
How do I skip tracks on the Everest 310/710 headphones?
To skip the tracks forward, you press and hold the volume up button for 3 seconds. To skip tracks backward, press and hold the volume down button for 3 seconds.

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi