


JBL SOUNDGEAR
JBL xin giới thiệu cho bạn một cách trải nghiệm âm thanh tại gia hoàn toàn – Choàng Soundgear vào cổ. Nhờ công nghệ JBL Signature Sound, Soundgear tạo ra vùng âm thanh cá nhân của riêng bạn trong khi vẫn cho phép bạn nhận thức đầy đủ về môi trường xung quanh. Hỗ trợ Bluetooth® để truyền phát âm thanh, JBL Soundgear có bộ chuyển đổi Quad với tăng âm Bass cho trải nghiệm âm thanh thú vị và thời gian sử dụng lên đến 6h, thời gian sạc nhanh là 2 giờ. Nhờ hệ thống mic kép với công nghệ khử tiếng vang,Soundgear sẵn sàng cung cấp cho bạn chất lượng đàm thoại rõ ràng nhất. Cấu trúc quanh cổ, hình dáng công thái học, điều khiển trực quan và lớp hoàn thiện bằng vải mềm mang đến trải nghiệm âm thanh thoải mái và mới lạ nhất, không giống như bất kỳ những gì bạn đã từng có trước đây. Cho dù bạn muốn tăng trải nghiệm VR với âm thanh sống động, xem video, nghe nhạc hoặc nói chuyện điện thoại, JBL Soundgear luôn cung cấp cho bạn trải nghiệm âm thanh thú vị, lan tỏa với sự tự do và thoải mái nhất .
Thông số sản phẩm
General Specifications
Kích thước driver (mm) | 31.0 |
---|
Audio Specifications
Độ nhạy của driver ở 1kHz / 1mW (dB) | 96dB |
---|---|
Dải đáp ứng tần số động (Hz) | 100Hz-20kHz |
Trở kháng (ohms) | 32.0 |
Số lượng driver trên mỗi tai | 1.0 |
Dimension Specifications
Trọng lượng (g) | 350.0 |
---|---|
Trọng lượng (oz) | 12,35 |
Control Connect Specifications
Cấu hình Bluetooth | HFP v1.6, HSP v1.2, A2DP v1.3, AVRCP v1.5 |
---|---|
Tần số Bluetooth | 2.402GHz-2.48GHz |
Module phát Bluetooth | GFSK,π/4DQPSK, 8DPSK |
Công suất phát Bluetooth | 0-4 dbm |
Phiên bản Bluetooth | 4.2 |
Tài liệu & Tải xuống
Bảng thông số
Hướng dẫn nhanh
Bộ sưu tập






Video
Có cái gì trong hộp vậy
- Soundgear
- Charging cable
- Warning card
- Warranty card
- Safety sheet
- Quick start guide

Câu hỏi thường gặp & How-Tos
Can I connect more than one Soundgear to the BTA transmitter?
No. The two Soundgears can connect to the BTA, but not to each other.
Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Can I adjust the call tone level on JBL Soundgear?
While you have an incoming call, and you can hear the call-tone from your SoundGear, simply adjust the SoundGear's call-tone level to the desired intensity, using the SoundGear's volume buttons.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
How do I pair to a different device on the JBL Soundgear?
Power on the Soundgear and press and hold the Bluetooth located next to the power button on the right arm. Once you press the the bluetooth button, you will see a fast blinking LED light as it attempts to pair to a different device. You will also hear the audible chime as it attempts to Make sure the device you are attempting to connect to is on and in pairing mode. The JBL Soundgear should be displayed on your discoverable devices within a few seconds. Choose the JBL Soundgear and you should now be connected!
Có hữu ích không?
Cảm ơn phản hồi của bạn!
I have connected the BTA 20 transmitter to my TV with the digital optical connection, but I get no sound on my Soundgear. How come?
Please make sure that the audio out format is set to PCM in the TV. Dolby Digital or other surround formats will not work with the BTA 20 transmitter.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Can I connect my Soundgear with analog jack cable, or other cables?
No, Soundgear is wireless Bluetooth only, and needs to be charged to play music.
But the BTA 20 transmitter must of course be connected with a cable to the signal source.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Can JBL Soundgear be used with a TV or with video games?
Yes, you can use your Soundgear for TV watching or playing video games.
You can use the TV speakers and the Soundgear simultaneously, they will be synchronized in time.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Soundgear: how to reset
Switch the Soundgear ON. (If this is not possible, reset cannot be performed.)
Press and hold Volume + and Volume - simultaneously for longer than five seconds.
Soundgear switches OFF, and is now reset to factory settings.
Press and hold Volume + and Volume - simultaneously for longer than five seconds.
Soundgear switches OFF, and is now reset to factory settings.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Does JBL Soundgear have express charging?
Yes, in two hours, you can charge it to approx. 6 hours of playing time.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
How do I power on and pair the JBL Soundgear?
Slide the power button in an upwards position. The power button will be located on the right arm next to the bluetooth button. Once you power on you will hear the audio chime. If this is your first time powering on the speaker, it will automatically go into pairing mode. You will see the fast blinking LED light as it searches for a device. Make sure that the device you are attempting to connect to is in pairing mode. The JBL Soundgear should be displayed on your discoverable devices within 3-8 seconds. Choose the JBL Soundgear and you are now connected!
Có hữu ích không?
Cảm ơn phản hồi của bạn!
What is the difference between Soundgear and Soundgear BTA?
The difference is the BTA unit, which is a Bluetooth transmitter.
The Soundgear BTA comes with the BTA unit in the box. The Soundgear does not.
The BTA can be connected (with a signal cable) to a TV set, a CD player, or any other stereo line-level source, and can then stream this signal to the Soundgear wirelessly, via Bluetooth.
TV sound or game sound are possible, since the BTA and the Soundgear use aptX Low Latency, which reduces the audio delay to levels, where picture and sound will be closely synchronized. This is also the secret behind the option to connect two Soundgears to one BTA unit, for two people to share a TV transmission, or a video game.
Actually, you can use the BTA to stream to most other Bluetooth headphones and loudspeakers, but only if these devices also support aptX LL will the delay be low enough for video use.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Does the Soundgear support aptX?
Yes, Soundgear supports aptX LL (Low Latency).
(aptX is a way of packing more information into a compressed version of a signal).
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Can I use the Soundgear with its BTA 20 Bluetooth transmitter with all kinds of sources?
Yes, all sources that output analog stereo line-level signals or stereo audio optical digital signals may be used, cable-connected to the BTA 20 transmitter.
Digital signals must be in PCM format.
So if you have a CD player or an FM radio, you can connect the BTA 20 to it, and transmit to your Soundgear (or to other Bluetooth headphones that support the format).
Please note that record players need an additional preamplifier to work this way.
Of course a TV set can be connected as well, either via optical digital PCM output, via line outputs or via headphone output.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
What are the two openings at the back of the Soundgear used for?
These are bass tuning canals, used to provide full sound.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Is the JBL Soundgear collar flexible?
Yes, two flexible joints permit you to expand the collar to make it easier to place it around your neck.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
How do I answer calls on the JBL Soundgear?
To answer and hang up calls, press the pause/play button located on the left arm of the Soundgear.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Không tìm được thứ bạn cần?
Gọi cho chúng tôi
Nói chuyện với chuyên gia về sản phẩm
(08:30 - 18:00)
Gửi email cho chúng tôi
365 ngày một năm
Chúng tôi sẽ trả lời trong vòng một ngày làm việc.