JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Hero JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Front JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Back
JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Hero
  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Swatch Image
  • JBL Endurance PEAK - Blue - Waterproof True Wireless In-Ear Sport Headphones - Swatch Image
  • JBL Endurance PEAK - Red - Waterproof True Wireless In-Ear Sport Headphones - Swatch Image

JBL Endurance PEAK

Giải phóng bản thân khỏi mọi ràng buộc và sẵn sàng đạt đến một cấp độ mới với tai nghe JBL Endurance PEAK. Tận hưởng sự tự do của một buổi tập luyện với tai nghe không dây mà không cần phải sạc lại trong vòng 28 giờ (4h + 24h hộp sạc). Và tuyệ vời hơn nữa đó là chỉ mất 10 phút sạc là có thêm 1h sử dụng. Nhờ công nghệ PowerHook ™, tai nghe JBL Endurance PEAK on và off một cách thuận tiện khi bạn bắt đầu đeo tai để sử dụng, vì vậy PEAK đã sẵn sàng cùng bạn tập luyện bất cứ bài tập nào với tinh thần hăng say nhất. Với thiết kế chống nước IPX7, JBL Endurance PEAK mang đến sự yên tâm khi sử dụng mà không lo về vấn đề rơi ra hay vào nước. Ngoài ra, tai nghe JBL Endurance PEAK hoạt động ở cả chế độ đơn(mono) lẫn âm thanh nổi(stereo) và cho phép bạn điều khiển âm thanh hoặc cuộc gọi trực tiếp trên tai nghe bằng các điều khiển cảm ứng tiện lợi. Và khi quá trình tập luyện của bạn kết thúc, chỉ cần đặt tai nghe của bạn vào hộp đựng rất bền bỉ và chắc chắn.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 10
Mã IP IPX7

Audio Specifications

Độ nhạy của driver ở 1kHz / 1mW (dB) 95
Dải đáp ứng tần số động (Hz) 16 Hz – 22 kHz
Số lượng driver trên mỗi tai 1

Dimension Specifications

Trọng lượng của hộp sạc (oz) 3.2
Trọng lượng của từng tai nghe (oz) 0.5
Trọng lượng của hộp sạc (g) 92.1
Trọng lượng của từng tai nghe (g) 14.4

Control Connect Specifications

Cấu hình Bluetooth A2DP 1.3, AVRCP 1.5, HFP 1.6
Tần số Bluetooth 2.402 – 2.480GHz
Module phát Bluetooth GFSK, π/4DQPSK, 8DPSK
Công suất phát Bluetooth 0 - 10dbm
Phiên bản Bluetooth 4.2
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • 3 x Sizes of ear tips
  • 1 x Enhancer
  • 1 x Charging Cable
  • 1 x Charging Case
  • 1 x Warranty/Warning
  • 1 x QSG/Safety Sheet
JBL Endurance PEAK - What's in the Box

Câu hỏi thường gặp & How-Tos

Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
How do I reset the Endurance Series Headphones?

For all models except Endurance Peak:
Press the headphone touch control located on the RIGHT ear loop for 15 seconds while the headphones are being charged.
Note that resetting the Dive will not erase music contained in the MP3 memory.

Endurance Peak reset: While the pods are being charged, tap the touch pad on the right pod once, then tap again and hold for approx 18 seconds, or until the LED blinks.

Is Volume Control Supported?
This headphone does not feature volume control. You must manually control volume from your device.
aptX Audio Codec Support
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
Waterproof Information (IPX7)

This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

IPX7-icon.png
How do I prevent damage to my USB charging sockets for my headphones?

There are several easy ways to prevent damage to your headphones, and please follow the steps below.

  1. If the USB port has a cover, please always have it covered, except when charging.

  2. Always be sure the USB port and connector are dry before connecting to charge.

  3. Do not allow any oils, stains, sweat, or corrosive materials to contact the charging port. It will eventually damage the port.

  4. Do not damage or block the USB port. For example, do not force it in if you have trouble inserting the USB connector into the port. Instead, examine the port and remove foreign substances that might be inside or blocking the port.

If you need more assistance, please contact the Customer Service team.
 
Endurance Series Headphones: Switching Devices
To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.
Endurance Series Headphones: Phone Information
To answer call, press the "L" on the JBL logo on the RIGHT ear for 1 second. To hang up, press the "L" for 1 second. To ignore the call, press and hold the "L" for 2-3 seconds.
Cleaning Instructions for Re-establishing Charging
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
needed-tools.png
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
cleaning-earbud-contact-points.png
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
cleaning-charging-case.png
Repeat until the contact points are visibly clean, and charging should work as designed.

Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.
Endurance Series Headphones: Charging
Fully charge the earbuds along with the charging case before the first use. The charging case is for charging the earbuds only. LED behaviors: 1 LED- 25% 2 LED-25%-50% 3 LED-50%-75% 4 LED-75%-99% NO LED-100% Fully Charged You can keep the earbuds in standby mode for up to 3 hours without having to return them to the case. beyond this point the earbuds must be returned to the case for charging. You should receive up to 4 hours of playback with additional 24 hours of backup power from the charging case.
Endurance Series Headphones: Track Control
To pause/play press the "L" on the JBL logo located on the RIGHT ear for 1 second. If you want to skip the track forward, press the "L" on the JBL logo on the RIGHT ear hook for 2 seconds. To skip tracks backward, press the "L" on the JBL logo on the RIGHT ear hook for 3-4 seconds.
Endurance Series Headphones: Apt X
The Endurance headphones do not support Apt X or AAC audio codecs.
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Endurance Series Headphones: Pairing Information
If connecting for the first time, the headphone will enter pairing mode automatically after it is powered on. To turn the headphones on, simply spread apart the RIGHT power hook from the cord. You will see solid red LED and then it will flash blue as it begins to search for a device to connect to. The Endurance headphone should pop up on your discoverable devices within a few seconds and you should be connected! If you wish to turn off the headphones, remove them from your ear and allow the RIGHT power hook and cord to close together. This is magnetized, so they should close together with ease.
Endurance Series Headphones: Volume Control
To control the volume, simply move your finger up the ridges above the JBL logo on the RIGHT ear to increase the volume. To decrease the volume, move your finger down along the ridges.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi