JBL Live 200BT - Red - Wireless in-ear neckband headphones - Hero JBL Live 200BT - Red - Wireless in-ear neckband headphones - Front JBL Live 200BT - Red - Wireless in-ear neckband headphones - Back
JBL Live 200BT - Red - Wireless in-ear neckband headphones - Hero
  • JBL Live 200BT - Red - Wireless in-ear neckband headphones - Swatch Image
  • JBL Live 200BT - Blue - Wireless in-ear neckband headphones - Swatch Image
  • JBL Live 200BT - Black - Wireless in-ear neckband headphones - Swatch Image
  • JBL Live 200BT - Green - Wireless in-ear neckband headphones - Swatch Image
  • JBL Live 200BT - White - Wireless in-ear neckband headphones - Swatch Image

JBL Live 200BT

Tận dụng tối đa mọi khoảnh khắc và giữ liên lạc với thế giới của bạn theo phong cách với JBL LIVE 200BT. Cung cấp âm thanh độc quyền JBL, tính năng phát nhạc không dây cùng với dây đeo cổ linh hoạt, những tai nghe nhét trong tai này cho phép bạn kết nối thoải mái khi di chuyển. Thưởng thức âm thanh tuyệt vời được cung cấp bởi trình điều khiển 8 mm của họ với hiệu suất bass mạnh mẽ. Truyền phát danh sách phát của bạn trong tối đa 10 giờ và sau đó sạc đầy pin chỉ trong 2 giờ. Được chế tạo bằng các vật liệu cao cấp với nhiều màu sắc, tai nghe JBL LIVE 200BT giúp bạn kết nối nhờ vào điều khiển từ xa 3 nút, micrô và kết nối đa điểm để chuyển đổi liền mạch giữa các thiết bị. Dễ dàng truy cập trợ lý giọng nói cho phép tích hợp dường như vô tận đến mọi nơi trong thế giới của bạn. Và để nâng cao hơn nữa sự thoải mái và tiện lợi khi di chuyển, người dùng sẽ tận hưởng nụ từ tính của họ để sử dụng không bị rối cũng như các nút tai cảm ứng mềm có nhiều kích cỡ.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 8

Audio Specifications

Dải đáp ứng tần số động (Hz) 20Hz – 20kHz
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • 1 x LIVE 200BT
  • 3 x Kích cỡ nút tai
  • 1 x Cáp sạc
  • 1 x Phiếu bảo hành/ cảnh báo
  • 1 x QSG/ Hướng dẫn an toàn
JBL Live 200BT - What's in the Box

Câu hỏi thường gặp & How-Tos

Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Waterproof Information
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

aptX Audio Codec Support
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Multi-Point Connection Support
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.

To connect to two devices at the same time:

1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection. 
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.

(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)


 
Can you take calls from the Live 200BT?
Yes. To take a call from the Live 200BT press the center button located on the RIGHT neckband for 1-2 seconds. To hang up, simply press the center button again.
Is the Live 200BT waterproof?
No. The Live 200BT does not feature any IPX rating so overexposure to both sweat and water can compromise the headphones.

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi