JBL Endurance SPRINT - Red - Waterproof Wireless In-Ear Sport Headphones - Hero JBL Endurance SPRINT - Red - Waterproof Wireless In-Ear Sport Headphones - Detailshot 1 JBL Endurance SPRINT - Red - Waterproof Wireless In-Ear Sport Headphones - Detailshot 2
JBL Endurance SPRINT - Red - Waterproof Wireless In-Ear Sport Headphones - Hero
  • JBL Endurance SPRINT - Red - Waterproof Wireless In-Ear Sport Headphones - Swatch Image
  • JBL Endurance SPRINT - Black - Waterproof Wireless In-Ear Sport Headphones - Swatch Image
  • JBL Endurance SPRINT - Teal - Waterproof Wireless In-Ear Sport Headphones - Swatch Image
  • JBL Endurance SPRINT - Yellow - Waterproof Wireless In-Ear Sport Headphones - Swatch Image
  • JBL Endurance SPRINT - Blue - Waterproof Wireless In-Ear Sport Headphones - Swatch Image

JBL Endurance SPRINT

Không có gì ngăn cản việc tập luyện của bạn. Với thiết kế không dây và IPX7 không thấm nước, tai nghe JBL Endurance SPRINT luôn hoạt động và với Speed ​​Charge, bạn có thể có một giờ nghe sau khi sạc pin chỉ trong 10 phút. Công nghệ nút tai FlexSoft ™ và công nghệ TwistLock ™ tạo sự thoải mái khi sử dụng, đảm bảo tai nghe được giữ cố định trong quá trình tập luyện của bạn. Phần điều khiển cảm ứng cho phép bạn dễ dàng quản lý âm nhạc và MagHook ™ cho phép bạn bảo vệ chúng một cách thuận tiện khi bạn không sử dụng tai nghe.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 10.0
Mã IP IPX7

Audio Specifications

Độ nhạy của driver ở 1kHz / 1mW (dB) -20dB
Dải đáp ứng tần số động (Hz) 20Hz–20kHz
Trở kháng (ohms) 16.0
Số lượng driver trên mỗi tai 1.0

Control Connect Specifications

Cấu hình Bluetooth HFP v1.6, A2DP v1.3, AVRCP v1.5
Tần số Bluetooth 2.402GHz-2.48GHz
Module phát Bluetooth GFSK, π/4DQPSK,8DPSK
Công suất phát Bluetooth 4 dbm
Phiên bản Bluetooth 4.2
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • Tai nghe thể thao – Endurance SPRINT
  • 3 kích cỡ nút tai
  • Cáp sạc
  • 1 x Bộ tăng cường
  • 1 x Phiếu bảo hành/ cảnh báo (W/ !)
  • 1 x Hướng dẫn an toàn/ QSG (S/ i)
JBL Endurance SPRINT - What's in the Box

Câu hỏi thường gặp & How-Tos

Waterproof Information (IPX7)

This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

IPX7-icon.png
How do I prevent damage to my USB charging sockets for my headphones?

There are several easy ways to prevent damage to your headphones, and please follow the steps below.

  1. If the USB port has a cover, please always have it covered, except when charging.

  2. Always be sure the USB port and connector are dry before connecting to charge.

  3. Do not allow any oils, stains, sweat, or corrosive materials to contact the charging port. It will eventually damage the port.

  4. Do not damage or block the USB port. For example, do not force it in if you have trouble inserting the USB connector into the port. Instead, examine the port and remove foreign substances that might be inside or blocking the port.

If you need more assistance, please contact the Customer Service team.
 
Endurance Series Headphones: Track Control
To pause/play press the "L" on the JBL logo located on the RIGHT ear for 1 second. If you want to skip the track forward, press the "L" on the JBL logo on the RIGHT ear hook for 2 seconds. To skip tracks backward, press the "L" on the JBL logo on the RIGHT ear hook for 3-4 seconds.
How do I pair to a different device on the Endurance Series headphones?
To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.
Endurance Series Headphones: Pairing Information
If connecting for the first time, the headphone will enter pairing mode automatically after it is powered on. To turn the headphones on, simply spread apart the RIGHT power hook from the cord. You will see solid red LED and then it will flash blue as it begins to search for a device to connect to. The Endurance headphone should pop up on your discoverable devices within a few seconds and you should be connected! If you wish to turn off the headphones, remove them from your ear and allow the RIGHT power hook and cord to close together. This is magnetized, so they should close together with ease.
Endurance Series Headphones: Volume Control
To control the volume, simply move your finger up the ridges above the JBL logo on the RIGHT ear to increase the volume. To decrease the volume, move your finger down along the ridges.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

Can the JBL Endurance SPRINT, JUMP and DIVE be used in salt water (i.e. sea)?
The JBL Endurance SPRINT, JUMP and DIVE can be used in salt water (i.e. sea) but we recommend to thoroughly wash the headphones in fresh water after every use in salt water, to remove the salt residue. Please note that only DIVE can actually be used in water, because it features a function lock and a built-in memory for MP3 music files. SPRINT and JUMP cannot be used in water, because the touch buttons will malfunction when submerged, and Bluetooth cannot function at all under water.
Can the JBL Endurance SPRINT, JUMP and DIVE be used to swim?
Because bluetooth cannot travel through water, the only Endurance model that is used for swimming is the Endurance DIVE model. The Endurance DIVE model features an MP3 player which allows you to listen to music under water without using bluetooth. Furthermore, only DIVE features a function lock, which prevents water from activating functions inadvertently. SPRINT and JUMP do not have this lock function, and will not work under water.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Endurance Series Headphones: Phone Information
To answer call, press the "L" on the JBL logo on the RIGHT ear for 1 second. To hang up, press the "L" for 1 second. To ignore the call, press and hold the "L" for 2-3 seconds.
How do I reset the Endurance Series Headphones?

For all models except Endurance Peak:
Press the headphone touch control located on the RIGHT ear loop for 15 seconds while the headphones are being charged.
Note that resetting the Dive will not erase music contained in the MP3 memory.

Endurance Peak reset: While the pods are being charged, tap the touch pad on the right pod once, then tap again and hold for approx 18 seconds, or until the LED blinks.

How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
What is the difference between the Endurance Sprint and Endurance Jump?
The Endurance Jump features the power hook which provides a secure fit ear hook design, which automatically turns the power on/off when putting on or taking off the earphones. The Sprint does not feature the power hook and you manually have to turn on/off the headphones by pressing and holding the JBL logo on the RIGHT ear hook.
Can the Endurance Series be connected to more than one device at a time?
The headphones can pair to multiple devices but can only be connected to one device at a time.
aptX Audio Codec Support
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi