JBL Endurance Peak II - Black - Waterproof true wireless sport earbuds - Hero JBL Endurance Peak II - Black - Waterproof true wireless sport earbuds - Front JBL Endurance Peak II - Black - Waterproof true wireless sport earbuds - Detailshot 1
JBL Endurance Peak II - Black - Waterproof true wireless sport earbuds - Hero
  • JBL Endurance Peak II - Black - Waterproof true wireless sport earbuds - Swatch Image
  • JBL Endurance Peak II - Blue - Waterproof true wireless sport earbuds - Swatch Image
  • JBL Endurance Peak II - White - Waterproof true wireless sport earbuds - Swatch Image
  • JBL Endurance Peak II - Coral - Waterproof true wireless sport earbuds - Swatch Image

JBL Endurance Peak II

A serious workout deserves serious gear. JBL Endurance Peak II true wireless headphones deliver JBL Pure Bass sound to fuel your workout, while providing comfort and connectivity to keep you going strong. Get next-level motivation with 30 hours of combined battery life, starting from the moment you wear them, thanks to the Powerhook™. Intuitive touch controls allow you to take hands-free calls and access your voice assistant, while dual connect ensures you’ll always be in control as the earbuds work independently. Their ergonomic fit and sweatproof/waterproof design let you exercise longer and harder, wherever your workout takes you.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 10
Mã IP IP67

Audio Specifications

Độ nhạy của driver ở 1kHz / 1mW (dB) 95
Dải đáp ứng tần số động (Hz) 20 Hz - 20 kHz
Trở kháng (ohms) 16
Số lượng driver trên mỗi tai 1

Dimension Specifications

Trọng lượng của hộp sạc (oz) 2.7
Trọng lượng của từng tai nghe (oz) 0.9
Trọng lượng của hộp sạc (g) 77
Trọng lượng của từng tai nghe (g) 26

Control Connect Specifications

Cấu hình Bluetooth A2DP 1.3 AVRCP 1.5 HFP 1.7
Tần số Bluetooth 2.4 GHz – 2.4835 GHz
Module phát Bluetooth GFSK, π/4DQPSK, 8DPSK
Công suất phát Bluetooth 0 - 13dbm
Phiên bản Bluetooth 5.0
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • 1 x JBL Endurance Peak II
  • 1 x Charging Cable type-C
  • 3 x Sizes of ear tips
  • 1 x Enhancer
  • 1 x Charging Case
  • 1 x Quick start guide / Safety Sheet
  • 1 x Warranty / Warning
JBL Endurance Peak II - What's in the Box

Câu hỏi thường gặp & How-Tos

Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Waterproof Information (IPX7)

This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

IPX7-icon.png
How do I prevent damage to my USB charging sockets for my headphones?

There are several easy ways to prevent damage to your headphones, and please follow the steps below.

  1. If the USB port has a cover, please always have it covered, except when charging.

  2. Always be sure the USB port and connector are dry before connecting to charge.

  3. Do not allow any oils, stains, sweat, or corrosive materials to contact the charging port. It will eventually damage the port.

  4. Do not damage or block the USB port. For example, do not force it in if you have trouble inserting the USB connector into the port. Instead, examine the port and remove foreign substances that might be inside or blocking the port.

If you need more assistance, please contact the Customer Service team.
 
Cleaning Instructions for Re-establishing Charging
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
needed-tools.png
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
cleaning-earbud-contact-points.png
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
cleaning-charging-case.png
Repeat until the contact points are visibly clean, and charging should work as designed.

Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.
How to Factory Reset True Wireless Stereo Headphones
Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi