JBL Reflect Contour 2 - Blue - Secure fit Wireless Sport Headphones - Hero JBL Reflect Contour 2 - Blue - Secure fit Wireless Sport Headphones - Detailshot 1 JBL Reflect Contour 2 - Blue - Secure fit Wireless Sport Headphones - Detailshot 2
JBL Reflect Contour 2 - Blue - Secure fit Wireless Sport Headphones - Hero
  • JBL Reflect Contour 2 - Blue - Secure fit Wireless Sport Headphones - Swatch Image
  • JBL Reflect Contour 2 - Black - Secure fit Wireless Sport Headphones - Swatch Image
  • JBL Reflect Contour 2 - Green - Secure fit Wireless Sport Headphones - Swatch Image
  • JBL Reflect Contour 2 - White - Secure fit Wireless Sport Headphones - Swatch Image

JBL Reflect Contour 2

JBL Reflect Contour 2 được thiết kế với cấu trúc nhôm chống mồ hôi, nhẹ và có móc tai phù hợp để bạn sẵn sàng mang lên tai và đi. Tùy chỉnh sự thoải mái của bạn với ba kích thước bộ tăng cường Freebit ™ và dễ dàng kiểm soát âm nhạc và cuộc gọi bằng điều khiển từ xa 3 nút và mic. Một dây cáp phản chiếu giúp bạn nhìn rõ hơn trong các thói quen ban đêm. Và với thời lượng pin 10 giờ cho âm thanh JBL đặc trưng, ​​bạn có thể tiếp tục di chuyển mà không bao giờ bị lỡ nhịp. Chỉ cần chạm vào nút, bạn có thể thuận tiện quản lý cuộc gọi của mình và truy cập trợ lý giọng nói.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 5.8
Mã IP IPX5

Audio Specifications

Dải đáp ứng tần số động (Hz) 2.402-2.480GHz
Trở kháng (ohms) 14.0
Số lượng driver trên mỗi tai 1.0

Dimension Specifications

Chiều dài cáp tai nghe (cm) 50.0
Chiều dài cáp tai nghe (ft) 1.64

Control Connect Specifications

Tần số Bluetooth 2.402 – 2.480GHz
Module phát Bluetooth GFSK, π/4 DQPSK, 8DPSK
Công suất phát Bluetooth <4 dbm
Phiên bản Bluetooth 4.2
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • Reflect Contour 2
  • 3 x Kích cỡ nút tai
  • 3 x bộ tăng cường
  • Cáp sạc
  • Túi đeo thể thao
  • 1 x Phiếu bảo hành/ Cảnh báo (W/ !)
  • 1 x Hướng dẫn an toàn/ QSG (S/ i)
JBL Reflect Contour 2 - What's in the Box

Câu hỏi thường gặp & How-Tos

How do you power on and pair the Reflect Contour?
Make sure that the device you want to connect to is on and in pairing mode. Press and hold the center button on the inline microphone for 3-5 seconds. (We recommend putting one ear tip inside your ear to hear the audio prompt) You should here "powering on.....pairing" as it searches for your device. The Reflect Contour headphone should appear on your discoverable devices and should connect within 2-3 seconds. If you wish to pair to a different device, make sure the last device it was connected to has the bluetooth turned off. Make sure the headphones are off and press and hold the center button between 3-5 seconds or until the audio prompt states that it is "looking for device" You should be able to pair with a different device within 2-3 seconds.
Is it possible to turn off the blinking blue LED light from my headphones?
No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

How do you skip tracks on the Reflect Contour?
The Reflect Contour BT lets you skip the tracks forward, by pressing and holding the volume up button for 3 seconds and skip tracks backward, by pressing and holding the volume down button for 3 seconds.
How can i see when it has finished charging?
The red charge light turns off when charging has finished.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
How do I reset my JBL headphones?
With the headphones switched ON, press and hold both volume buttons for more than 5 seconds.
Your headphones are now reset to factory status.
 
Does this headphone feature volume control?
Yes, this headphone features a three button microphone that features volume control, track control, and can receive phone calls.
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
aptX Audio Codec Support
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
How do I know when the headphone is fully charged?
When the headphones are charging, you will see a solid red light at the top of the inline microphone. When the headphones are fully charged, the red light will shut off. You should expect 8 hours of playback time. Please keep in mind that the level of volume can effect the longevity of the battery life.

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi