



JBL Quantum 300
Thông số sản phẩm
General Specifications
Weight (g) | 245 |
---|
Audio Specifications
Độ nhạy của driver ở 1kHz / 1mW (dB) | 100 dB SPL @1 kHz / 1mW |
---|---|
Dải đáp ứng tần số động (Hz) | 20 Hz - 20 kHz |
Trở kháng (ohms) | 32 |
Dimension Specifications
Chiều cao bên ngoài của chụp tai (in) | 3.9 |
---|---|
Chiều rộng bên ngoài của chụp tai (in) | 3.5 |
Chiều cao bên trong của chụp tai (in) | 2.3 |
Chiều rộng bên trong của chụp tai (in) | 1.9 |
Độ sâu chụp tai (in) | 1.1 |
Chiều cao bên ngoài của chụp tai (cm) | 9.9 |
Chiều rộng bên ngoài của chụp tai (cm) | 8.8 |
Chiều cao bên trong của chụp tai (cm) | 5.8 |
Chiều rộng bên trong của chụp tai (cm) | 4.9 |
Độ sâu chụp tai (cm) | 2.7 |
Chiều dài cáp âm thanh (ft) | 3.9 |
Chiều dài cáp âm thanh (m) | 1.2 |
Tài liệu & Tải xuống
Bảng thông số
Sách hướng dẫn
Hướng dẫn nhanh
Bộ sưu tập












Video
Có cái gì trong hộp vậy
- Tai nghe JBL Quantum 300
- Bộ chuyển đổi USB
- Màng lọc gió cho micro
- Hướng dẫn | Thẻ bảo hành | Bảng an toàn

Câu hỏi thường gặp & How-Tos
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.
-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)
Check that the PC is using the correct recording device.
1. Go to Control Panel
2. Select Sound
3 Select Recording
4. Make sure to select the proper recording device.
- Right-click on it Quantum headset.
- Now select "Set Default Device" or "Select Default Communication Device"
6. Go to Properties
7. Choose Levels and adjust accordingly
Make sure the headset volume control is turned up. Rotate the volume wheel on your headset to increase the volume. If you're using the USB dongle, check that the correct playback device is selected under Control Panel > Sound > Playback. Select the proper playback device, right-click, and select "Set as Default Device". Check the computer volume levels and make sure it is not muted or turned all the way down.
Please check out this video to assist you further!
https://www.youtube.com/watch?v=LA80RmBrbYg
To get the Game-Chat dial feature, you need JBL Quantum 400, and up, then you can adjust game-chat balance by rotating the dial-up and down.
For models that support Game-Chat dial, when you rotate the dial, you will feel a notch that indicates 50% game and 50% chat. Or you can see the status on the top bar of the JBL QuantumENGINE.
QUANTUM ENGINE
Software Update Release Notes
Version 1.6.0.1053
Release Date: 1/21/21
-
Welcome feature has been implemented.
-
Surround Modes feature has been implemented.
-
ANC/TT toggle has been implemented.
-
The sidetone has been turned off by default for all models to avoid confusion.
-
QuantumSURROUND/QuantumSPHERE quality & performance have been improved.
-
Quantum 300 Mic Gain has been improved.
-
Quantum 800 FW update reliability has been improved.
-
Minor Bugs Fixed
Please note: JBL QuantumENGINE is only available on PC.
All JBL Quantum headset models work through 3.5mm audio jack (aux) connected to the PlayStation controller. USB models will also work on PlayStation. In addition, the wireless models works wirelessly when connected to the 2.4GHz USB dongle.
Please note: JBL QuantumENGINE is only available on PC. Custom lighting can be set up on PC, and will carry over when connected with USB cable or 2.4GHz USB dongle.
The JBL Quantum 300 headset is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
You can also use the included USB dongle on PC, PlayStation and Mac.
The “Speaker” mode allows the JBL QuantumENGINE to receive more than two channels of audio. It also prevents some applications from adding extra signal processing intended for other headphones, which would negatively impact the performance of the JBL QuantumSURROUND or JBL QuantumSPHERE 360 technology.
Không tìm được thứ bạn cần?
Gọi cho chúng tôi
Nói chuyện với chuyên gia về sản phẩm
(08:30 - 18:00)
Gửi email cho chúng tôi
365 ngày một năm
Chúng tôi sẽ trả lời trong vòng một ngày làm việc.