


JBL Tune 205BT
Giới thiệu tai nghe JBL TUNE205BT với thiết kế gọn nhẹ và thoải mái khi sử dụng. Ẩn sau lớp vỏ tai nghe bền bỉ là một driver dynamic 12.5mm giúp tái tạo chất Bass mạnh mẽ chuẩn JBL ở các nhà hát và phòng thu âm trên toàn thế giới. Ngoài ra TUNE205BT còn được tích hợp một nút điều khiển đi kèm với dây dẹt chống rối giúp bạn dễ dàng thao tác phát nhạc cũng như trả lời cuộc gọi khi đang di chuyển với micro tích hợp sẵn. TUNE205BT sẽ trở thành người bạn đồng hành tuyệt vời bên cạnh bạn bất cứ đâu.
Thông số sản phẩm
General Specifications
Kích thước driver (mm) | 12.5 |
---|
Audio Specifications
Độ nhạy của driver ở 1kHz / 1mW (dB) | 100dB SPL/1mw |
---|---|
Dải đáp ứng tần số động (Hz) | 20 Hz - 20 kHz |
Trở kháng (ohms) | 32.0 |
Số lượng driver trên mỗi tai | 1.0 |
Dimension Specifications
Chiều dài cáp tai nghe (cm) | 78.0 |
---|---|
Chiều dài cáp tai nghe (ft) | 2.56 |
Trọng lượng (g) | 16.5 |
Trọng lượng (oz) | 0.58 |
Control Connect Specifications
Tần số Bluetooth | 2.402GHz-2.48GHz |
---|---|
Module phát Bluetooth | GFSK,DQPSK, 8-DPSK |
Công suất phát Bluetooth | 0~4 dbm |
Phiên bản Bluetooth | 4.1 |
Tài liệu & Tải xuống
Bảng thông số
Hướng dẫn nhanh
Bộ sưu tập





Có cái gì trong hộp vậy
- 1 x pair of TUNE205BT headphones
- 1 x Charging cable
- 1 x Warning card
- 1 x Warranty card
- 1 x Safety sheet
- 1 x QSG

Câu hỏi thường gặp & How-Tos
Waterproof Information
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
How do I power on and pair the Tune 205BT?
Make sure that the device you want to connect to is on and in pairing mode. Press and hold the center button on the inline microphone for 3-5 seconds. (We recommend putting one ear tip inside your ear to hear the audio prompt) You should here "powering on.....pairing" as it searches for your device. The Tune 205BT headphone should appear on your discoverable devices and should connect within 2-3 seconds. If you wish to pair to a different device, make sure the last device it was connected to has the bluetooth turned off. Make sure the headphones are off and press and hold the center button between 3-5 seconds or until the audio prompt states that it is "looking for device" You should be able to pair with a different device within 2-3 seconds.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
How can I reset the headphones?
Press volume + and volume - simultaneously for 5 seconds to reset.
The headphone must be ON while doing this.
The headphone must be ON while doing this.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Does the microphone feature volume and track control on the Tune 205BT?
Yes, the microphone allows you to skip tracks and control volume. To skip tracks forward, press and hold the volume + for 3 seconds. To skip tracks backward, press and hold the volume - for 3 seconds.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Are there different sized ear tips for the Tune 205BT?
There are no additional ear tips for the Tune 205BT. These headphones do not feature different size ear tip variations.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
aptX Audio Codec Support
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Can you activate SIRI on the Tune 205BT?
You have to manually press the home button on your phone to activate SIRI. Once SIRI is activated, you can speak through the headphones to ask SIRI questions.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Có hữu ích không?
Cảm ơn phản hồi của bạn!
Không tìm được thứ bạn cần?
Gọi cho chúng tôi
Nói chuyện với chuyên gia về sản phẩm
(08:30 - 18:00)
Gửi email cho chúng tôi
365 ngày một năm
Chúng tôi sẽ trả lời trong vòng một ngày làm việc.