JBL Free X - Black - True wireless in-ear headphones - Hero JBL Free X - Black - True wireless in-ear headphones - Front JBL Free X - Black - True wireless in-ear headphones - Back
JBL Free X - Black - True wireless in-ear headphones - Hero
  • JBL Free X - Black - True wireless in-ear headphones - Swatch Image
  • JBL Free X - White - True wireless in-ear headphones - Swatch Image
  • JBL Free X - Blue - True wireless in-ear headphones - Swatch Image

JBL Free X

Tai nghe JBL FreeX mang đến cho bạn âm thanh JBL Signature Sound trứ danh trong một thiết kế nhỏ gọn và trực quan nhất, JBL FreeX sẽ là người bạn đồng hành lý tưởng của bạn cho mọi góc độ của cuộc sống.. Bạn sẽ nhận được thời gian sử dụng lên đến 24h: 4 giờ nghe liên tục trên tai nghe cộng với 20 giờ từ hộp sạc thông minh. Thiết kế công thái học cùng với 3 kích cỡ khuyên tai giúp bạn sử dụng thoải mái cả ngày dài. Được chứng nhận kháng nước chuẩn IPX5, sẵn sàng cùng bạn trong mọi điều kiện nắng mưa.

Thông số sản phẩm

General Specifications

Kích thước driver (mm) 5.6

Audio Specifications

Độ nhạy của driver ở 1kHz / 1mW (dB) 96
Dải đáp ứng tần số động (Hz) 10 Hz – 22 kHz
Số lượng driver trên mỗi tai 1

Dimension Specifications

Trọng lượng (g) Total: 99g
Trọng lượng (oz) Total: 3.5oz

Control Connect Specifications

Cấu hình Bluetooth A2DP 1.3, AVRCP 1.5, HFP 1.6
Tần số Bluetooth 2.402 – 2.480GHz
Module phát Bluetooth GFSK, π/4DQPSK, 8DPSK
Công suất phát Bluetooth 0 - 9.5dbm
Phiên bản Bluetooth 4.2
Vui lòng tham khảo tài liệu để biết thông số kỹ thuật chuyên sâu

Tài liệu & Tải xuống

Video

Có cái gì trong hộp vậy

  • 1 x JBL Free headphones
  • 1 x Charging case
  • 2 x sets of gel sleeves (M, L)
  • 3 x sets of silicone ear tips (S, M, L)
  • 1 x Micro USB charging cable
  • 1 x Quick start guide
  • 1 x Safety sheet
  • 1 x Warranty
  • 1 x Warning sheet
JBL Free X - What's in the Box

Câu hỏi thường gặp & How-Tos

Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

How do you take a phone call with the JBL Free?
Press and hold the RIGHT center button for 1-2 seconds.
TWS Left & Right Not Pairing Together
The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order.
  1. Forget/unpair the headphones on your device.
  2. Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
  3. Pair the headphones to your device and see if this resolves the problem.
  4. If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
  5. Initiate a Product Reset to reset the earbud’s Bluetooth connection.
    • Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
    • Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
    • Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
    • Pair the buds to your Source Device.
JBL Free: Volume Control
The JBL Free X does not feature volume control. In order to adjust the volume, you must manually increase/decrease from your device.
Does the JBL Free have volume control?
No. The JBL Free does not feature volume control. It features pause/play and track control.
JBL Free: Manual Re-pairing Left & Right Ear Pieces
In the event that left and right ear piece pairing is lost, power on both ear pieces and press the buttons 3 times on each ear piece to initiate re-pair.
Is Volume Control Supported?
This headphone does not feature volume control. You must manually control volume from your device.
My Left Ear Piece on the JBL Free wont connect anymore, what can be done?
There will be times that the LEFT ear will disconnect from the RIGHT or (primary) earbud. To get the Left ear to reconnect, make sure that the RIGHT earbud is on and emitting sound. Take the LEFT ear out of the charging case and put in ear. Press and hold down the power button on the LEFT ear bud for 5-8 seconds. You should hear the power on chime and then both ear buds should emit sound now. 
aptX Audio Codec Support
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
JBL Free: Manual Re-pairing to Bluetooth Devices
In the event that ear pieces do not re-pair automatically to paired Bluetooth device, power off ear pieces individually by press and hold the buttons for 5 seconds. To enter Bluetooth pairing mode when ear pieces are powered off, press and hold on buttons of both earpieces for 8 seconds. Re-pair the right ear piece with desired Bluetooth device when LED indicator on right ear piece alternates between blue and white LED lights.
How to Turn off your TWS Headphones
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
Cleaning Instructions for Re-establishing Charging
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
needed-tools.png
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
cleaning-earbud-contact-points.png
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
cleaning-charging-case.png
Repeat until the contact points are visibly clean, and charging should work as designed.

Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
JBL Free: Power On Information
Remove the Right ear piece from the case. (It should automatically enter into pairing mode and will alternate between blue and white LED) Make sure the unit you are trying to connect to is in pairing mode. It should recognize the JBL Free within 3-8 seconds. Choose "JBL Free" to connect.
Pairing issues with a Smartphone or Tablet
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
I can only hear out of the right ear when I take a phone call with the JBL Free. Is this normal?
What you are experiencing is normal. The JBL Free will automatically switch to mono mode on the RIGHT ear when the call starts. After the call ends stereo music mode will automatically resume.
JBL Free: Charging Information
When you place the two Free earphones in the charging case, you will see a white led ring light up on both of them. At the same time, some of the four dot-leds on the charging case will light up to indicate the battery level of the case battery. When the earphones are fully charged, the white led ring goes out on each of them. When both are fully charged, the charging case charging level leds go out too.
How to Factory Reset True Wireless Stereo Headphones
Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
JBL Free: Sweat Proof
The JBL Free has an IPX5 rating that helps protect the headphones from sweat and moisture.
JBL Free: Pairing Information
Remove ear pieces from the case. Both ear pieces should automatically connect to each other. Wireless connections are automatically established when the headphones are taken out of the case. To pair to a different device, press and hold the Right ear piece for 5 seconds as it alternates between blue and white LED lights. Make sure that the device you are attempting to connect to is in pairing mode. The JBL Free should display on discoverable devices within 3-8 seconds. Choose JBL Free and the headphones will connect after you hear the audio confirmation tone.
JBL Free: Handsfree calls
The JBL Free automatically switches from stereo to mono when making or taking phone calls. Voice calls will only come through the right ear piece for a more natural call experience.

Không tìm được thứ bạn cần?

Gọi cho chúng tôi

Gọi cho chúng tôi

Nói chuyện với chuyên gia về sản phẩm Gọi cho chúng tôi ngay theo số 028 3 9972 675

(08:30 - 18:00)

Gửi email cho chúng tôi

Gửi email cho chúng tôi

365 ngày một năm

Chúng tôi sẽ trả lời trong vòng một ngày làm việc.

Gửi email cho chúng tôi