MS 6100
6-1/2 inch Dual Cone Marine Loudspeaker
Được bán từ 2005 đến nay
| Sản phẩm tiền nhiệm: | MS 610 |
|---|---|
| Made in: | China |
Tài liệu & Tải xuống
Thông số sản phẩm
- Recommended Amplifier Power (RMS)
- 35 Watts
- Power Handling (peak)
- 105 Watts
- Frequency Response
- 55Hz – 20kHz (±3dB)
- Sensitivity (1 watt @ 1 meter)
- 90dB
- MSRP U.S.
- $89.95 per pair
- Sensitivity
- (2.83V/1m) 91dB
- Frequency Response
- 50Hz-18kHz
- Mounting Depth
- 2-9/16 inch
6-1/2 inch (160mm) Dual-Cone Marine Speaker with integrated grille assembly, rubber surrounds, polypropylene woofer cone and cast-polymer basket.
With all the right waterproofing, a one-piece cast-polymer basket, a sealed magnet, rubber surrounds and a grille-mounted tweeter, the JBL® MS6100 is, like all JBL marine audio products, built to survive salt water, corrosion and other risks – and show you a great time out there.
The roar of the open sea can drown out audio. The JBL® MS6100’s polypropylene cone delivers rigidity with good internal damping and complete weather resistance. You get an impossible-to-miss increase in thumping bass that stands up to anything.
Owning a boat takes commitment and work. Installing the JBL® MS6100? Not so much. It has a mounting depth of only 2-3/4 inches (70 millimeters) and a cutout diameter of 5-1/16 inches (129 millimeters). You can put it in the tightest of spots.
The JBL® MS6100 has a power output of 35 watts RMS and peak power handling of 105 watts. With all that power, you can fill the fresh, open air with great sound.
The JBL® MS6100’s mounting hardware is as strong and weather-resistant as everything else about the MS6100. It’s all included, along with step-by-step instructions. You’ll be rocking out on the open water in no time.
Hình ảnh & Video
Không tìm được thứ bạn cần?
Gọi cho chúng tôi
Nói chuyện với chuyên gia về sản phẩm
(08:30 - 18:00)
Gửi email cho chúng tôi
365 ngày một năm
Chúng tôi sẽ trả lời trong vòng một ngày làm việc.