Studio 570
150-watt, dual 5-1/4" floorstanding loudspeaker
Sold from 2011 until now
Documents & Downloads
Product Specifications
- Type
- Two-way dual-woofer, floorstanding
- Crossover Frequencies
- 1.5kHz
- Sensitivity
- (2.83V@1m) 88dB
- Frequency Response
- (-6dB) 45Hz-40kHz
- Nominal Impedance
- 6 ohms
- Width (mm)
- 214
- Height (mm)
- 896
- Weight (kg)
- 15.6
- Depth (mm)
- 284
- Weight (lb)
- 34.4
- Depth (in)
- 11-3/16
- Height (in)
- 34-1/16
- Width ( in)
- 8-7/16
- Connector Type
- Dual gold-plated binding posts (bi-wire capable)
- Low-Frequency Transducer
- Two 5-1/14" (130mm) PolyPlas cones with Symmetrical Field Geometry magnet structures, cast frames and rubber surrounds, magnetically shielded
- High-Frequncy Transducer
- 1" (25mm) compression driver with neodymium magnet and one-piece Teonox diaphragm on a glass-filled ABS Bi-Radial horn, magnetically shielded
Technologically advanced floorstanding loudspeaker.
The JBL® Studio 570 floorstanding loudspeaker brings professional-quality sound to the home experience. The Studio 570 uses the technology that JBL engineers developed for pro-audio loudspeakers to deliver accurate and powerful sound to your living room. The Studio 570 floorstanding speaker is a perfect complement to other members of the Studio 5 Series, including the Studio 530 bookshelf and the Studio 520C center-channel loudspeakers.
JBL engineers have designed the JBL Studio 570 floorstanding loudspeaker to deliver robust sound from a compatible AVR (audio/video receiver) or 25- to 150-watt power amplifier, whether you are using the Studio 570 as a stand-alone unit or as part of a surround-sound system.
Powerful bass affects more than just your ears. It resonates through your entire body, creating a soundscape that you can feel as well as hear. The JBL Studio 570 floorstanding loudspeaker delivers accurate low-frequency sounds from a pair of 5-1/4-inch (130-millimeter) ribbed PolyPlas woofers. The ribs improve strength, while reducing distortion. The result is rich, powerful, articulate bass.
Thanks to a heavy-duty magnet Symmetrical Field Geometry (SFG) assembly, the JBL Studio 570 floorstanding loudspeaker’s pair of low-frequency woofers delivers highly focused bass. The result is pristine, articulate sound.
The JBL Studio 570 floorstanding loudspeaker’s high-frequency compression driver lowers distortion and provides a wider dynamic range than is possible from conventional high-frequency and midrange drivers. The tweeter comprises a one-piece Teonex® diaphragm/surround assembly fitted with a 1-inch (25-millimeter) voice coil that can deliver enhanced vocal articulation.
Horn-shaped loudspeaker designs optimize high-frequency output by directing the sound to the listener with pinpoint accuracy, thereby eliminating reverberations, sound reflections off walls, and other artifacts. The Studio 570 floorstanding loudspeaker features a glass-filled ABS Bi-Radial high-frequency horn that delivers professional-level sound to your home.
The Studio 570 floorstanding loudspeaker’s low-loss, two-way crossover network ensures a clean transition for sound coming from individual low- and high-frequency drivers, thereby reducing distortion while improving clarity.
The Studio 570 floorstanding loudspeaker will work with multiple power amplifiers or connection setups – or both – for single-wire or bi-wire operation. The result is enhanced versatility in the way you can use the Studio 570 speaker.
The Studio 570 floorstanding loudspeaker’s cabinet is built with the same attention-to-sound-perfection as every other component. Rigid, heavily braced materials prevent unwanted resonance, while non-parallel surfaces eliminate sound interference.
The same attention to detail that went into the Studio 570 floorstanding loudspeaker’s technical design was paid to creating a powerful, sophisticated look that will fit within even the most discerning householder’s décor. The Studio 570 is available in a black or cherry finish.
Images & Videos
