WEM-1
Surrounding yourself with great sound doesn’t have to mean surrounding yourself with wires and more holes in your walls, floors or ceilings. Set your speakers free with the JBL® WEM-1 Wireless Expansion Module. You’ll have audio throughout your home or office from your PC, A/V receiver, iPod or other portable music devices. The WEM-1 has a 50-watt-per-channel amplifier and receives crystal clear signals within a 70-foot range. It's built around a 2.4GHz proprietary system and ensures optimal performance. An EQ switch works with compatible JBL speakers. If you want professional JBL sound in an easy-setup wireless system, this is it.
Introduction Year
2008
Made in
China
Product Specifications
General Specifications
| Included Mounting Hardware | 1 Front |
|---|---|
| Series | Wireless |
Audio Specifications
| Audio Frequency Range | (+0dB, –1dB) 20Hz – 20kHz |
|---|---|
| Amplifier Power Output | 50 per channel |
| Audio Sensing Turn-On/Turn-Off | Standby mode after approximately 10 minutes, when no signal is detected from your system. The WEM-1 will then power on instantly when a signal is detected. |
| Signal-to-Noise Ratio | 80dBA |
Dimension Specifications
| Receiver Module Width (in) | 6-3/16 |
|---|---|
| Transmitter Module Width (in) | 6 |
| Receiver Module Depth (mm) | 116 |
| Receiver Module Width (mm) | 158 |
| Receiver Module Weight (lb) | 0.9 |
| Receiver Module Height (in) | 1-1/8 |
| Receiver Module Depth (in) | 4-5/8 |
| Transmitter Module Weight (kg) | 0.3 |
| Transmitter Module Depth (in) | 3-7/8 |
| Transmitter Module Height (in) | 1-1/8 (3-3/4 high with antenna extended) |
| Receiver Module Weight (kg) | 0.4 |
| Receiver Module Height (mm) | 29 (95 high with antenna extended) |
| Transmitter Module Weight (lb) | 0.6 |
Wireless System Specifications
| RF Operating Range | Up to 70' (22m), depending upon conditions |
|---|---|
| RF Operating Frequency | 2.4GHz |
| Adjustable EQ | 6 Settings |
| Selectable RF Channel | Rear |
Control Connect Specifications
| Speaker Output Connections | 1 Rear |
|---|---|
| Subwoofer Output Connection | 1 Rear |
| Speaker-Level Input Connections | 1 Rear |
Documents & Downloads
Spec Sheets
Manuals
What’s in the Box
- (1) Receiver-amplifier module
- (1) 6' (1.8m) audio stereo cable RCA-RCA
- (1) Wall-mount bracket for transmitter
- (2) Panhead M3s, (4) machine screws for wall-mount bracket to transmitter
- (1) USA warranty sheet
- (1) Owner's Manual
- (1) Transmitter module
- (1) 120V AC power cord for receiver-amplifier power supply, (1) 230V AC power cord for receiver-amplifier power supply - Shuko plug, (1) 230V AC power cord for receiver-amplifier power supply - UK plug
- (2) Wall-mount brackets for receiver
- (1) Handheld remote control
- (1) Pedestal to be attached on receiver's left side if it is used vertically
- (1) 120V AC power cord for transmitter power supply, (1) 230V AC power cord for transmitter power supply - Shuko plug, (1) 230V AC power cord for transmitter power supply - UK plug
- (1) Power supply for transmitter
- (4) Small, round, self-adhesive feet - to be attached on transmitters left side panel if transmitter is used vertically
