JBL Reflect Fit
Heart Rate Wireless Headphones
Sold from 2017 until now
Documents & Downloads
Product Specifications
- Driver size (mm)
- 5.8
- Dynamic frequency response range (Hz)
- 10Hz-22kHz
- Number of drivers per ear
- 1.0
- Headphone cable length (cm)
- 16 * 2
- Headphone cable length (ft)
- 0.5 * 2
- Weight (g)
- 37.0
- Weight (oz)
- 1.3
- Bluetooth profiles
- A2DP v1.3, AVRCP v1.6, HFP v1.6, HSP v1.2
- Bluetooth frequency
- 2.402GHz-2.48GHz
- Bluetooth transmitted modulation
- GFSK,π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- <4 dbm
- Bluetooth version
- 4.2
- Charging time (hours from empty)
- 2.0
- Maximum music play time with ANC off (hours)
- 10.0
- Maximum play time (hours)
- 10.0
- Maximum talk time (hours)
- 10.0
- Carrying pouch
- Yes
- Hands Free Call
- Yes
- In-ear neckband
- Yes
- JBL Signature Sound
- Yes
- Rechargable battery
- Yes
- Reflective cable
- Yes
- Siri/ Google Now
- Yes
- Speed charge
- No
- Sweat Proof
- Yes
- Wireless
- Yes
- 4-Button Remote/ Mic
- Yes
- Heart Rate Monitoring
- Yes
Get in the zone with your favorite music.
JBL Reflect Fit Heart Rate wireless sports headphones with JBL Signature Sound are designed to help you train in the zone. With its heart monitor technology, compatible with most Heart Rate enabled fitness apps, you can stream the pulse readings directly to your phone for data analysis and receive real-time updates through the headphones with just a single touch. The secure fit ergonomics design adapts to your movement for a distraction-free wearing experience. This, combined with its sweat-proof construction, makes the JBL Reflect Fit the perfect workout companion. The Reflect Fit is not only great for workouts, it’s also the perfect partner for any moment of your active lifestyle: thanks to the extended 10-hour max battery life and integrated microphone with vibration call alert, you will never miss a beat or a call.
For over 70 years, JBL has engineered the precise, naturally articulated sound found in high-end cinemas, arenas and recording studios around the world. That legendary JBL sound is now available anywhere personal audio travels.
Get instant Heart Rate read-outs without touching your phone or device.
Never miss a call thanks to Call Vibration Alerts, the headphones vibrate to alert you of an incoming call.
Lighweight, flexible neckband design combined with ergonomic ear tips (Freebit™) help the headphones stay put through the most intensive workouts.
15 minutes of quick charge = up to 1 hour of music playback.
Ramp up the intensity of your workouts without fear. Boasting an IPX5 level, these headphones are built to work with you at your sweatiest.
FAQs & How-Tos
5 results
-
Yes, the volume control buttons are located on the LEFT arm of the neckband.Was this helpful? Thank you for your feedback!
-
Go to your Bluetooth Settings to confirm that you are connected to both JBL Reflect Fit Audio and JBL Reflect Fit HRM. Once you are connected to the Reflect Fit HRM you will hear the audio voice prompt state, "Searching for Heart Rate"......"Calibrating" followed by a heart beat prompt. It will calibrate for 2-5 seconds followed by "Heart Rate Detected". If it cannot verify your heart rate, the audio voice prompt will advise you to adjust the ear piece. Once it has established your heart rate, you will be able to manually check your heart rate by pressing the heart button located on the RIGHT arm of the neck band.Was this helpful? Thank you for your feedback!
-
Press and hold the power button which is located on the right arm of the neck band. Press and hold for 3-5 seconds until you hear the audible voice state "Powering ON" followed by "Looking for device." Make sure the device you are attempting to connect to is in search mode and within bluetooth range. You will see Reflect Fit Audio on the discoverable devices. Choosing this option will allow you to receive audio playback.Was this helpful? Thank you for your feedback!
-
To skip the tracks forward, press and hold the volume up (+) button for 1-2 seconds and you will advanced to the next song. To start the current song you are listening to over, press and hold the volume down (-) button for 1-2 seconds. Please note: You can only advance to the next song be skipping forward, you cannot skip tracks backward. You can only restart the current song over by pressing the volume down (-) button.Was this helpful? Thank you for your feedback!
-
The heart rate sensor is located inside the RIGHT earbud inside the sound tunnel. If the Heart Rate detection is activated and you remove the RIGHT earbud, the audio voice will notify you to insert the ear bud and will recalibrate once it is detected again.Was this helpful? Thank you for your feedback!
