GT5-12

GT5-12

12 inch Subwoofer

Sold from 2007 until now

Predecessor Product: GRAND TOURING GTO 1202D
Made in: China

Documents & Downloads

Product Specifications

Size
12"
Series
GT5
MSRP U.S.
$119.95 each
Peak Power
1100W
Nominal Impedance
4 ohms
Power Handling (RMS)
275W
Frequency Response
27Hz–450Hz
Power Handling (Peak)
1100W
Sensitivity
(2.83V/1m) 90dB
External Diameter (in)
12-5/16
External Diameter (mm)
313
Mounting Depth (in)
6-7/16
Mounting Depth (mm)
164
Mounting Cutout Diameter (mm)
286
Mounting Cutout Diameter (in)
11-1/4
Mechanical Q
(Qms) 6.39
Magnetic Gap Height
(Hag – in/mm) 0.315/8
Motor Force Factor
(Bl – Tm) 15.2
Voice Coil Height
(Hvc – in/mm) 1.43/36.4
Maximum Excursion
(Xmax –in/mm) 0.56/14.2
Suspension Compliance
(Cms – ?m/N) 135
Free-Air Resonance
(Fs – Hz) 29
Driver Radiating Area
(Sd – in2/cm2) 82.15/530
Voice Inductance
@ 1kHz (Levc – mH) 1.26
Diecast Aluminum Frame
No
Voice Coil DC Resistance
(Revc – ohms) 4
Vented Polepiece
Yes
Surround
Hi-roll rubber
Electrical Q
(Qes) 0.64
Low-Frequency Transducer
12" (305mm) Polypropylene cone
Compliance Volume
(Vas – ft3 / l) 1.9/54.2
Voice Coil
2" (51mm) diameter
Progressive Spider
Yes
Total Q
(Qts) 0.58

The GT5-12 features a single 4-ohm voice coil and a vented motor structure, and offers 1100 watts of peak power handling. With its fully vented motor structure and rubber-coated tinsel leads, the GT5-12 can withstand even the most intense bass assault. And unlike competing entry-level subwoofers, the GT5-12 is based on a solid motor structure featuring two large magnets covered by the classic JBL® rubber ring.

Road noise can destroy realistic audio that always requires true low frequencies. Polypropylene delivers rigidity, with good internal damping, and complete weather-resistance. You get an impossible-to-miss increase in thumping bass.
With 250 watts RMS and 1100 watts of peak power handling, the GT5-12 changes the experience of listening to your favorite music in your car. And a progressive spider gives better control for lower distortion at excursion limits.
Woofer motor structures heat up during use, causing distortion, or power compression that reduces music’s dynamic range, robbing the sound of realism. JBL uses vented motor structures and polepieces that get rid of more heat to deliver more serious bang.
It’s built to the same exacting standards as JBL professional audio boxes with 3/4" medium-density fiberboard construction, and high-quality binding-post terminals. Wide-bandwidth design provides more output between 20Hz and 40Hz. You get all the bass you’ve paid for.
With a frequency response of 23Hz – 450Hz, the GT5-12 reproduces deep, teeth-rattling bass tones without distortion.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: 028 3 9972 675

(08:30 - 18:00)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us