JBL Cinema SB130
2.1 Channel soundbar with wired subwoofer
Sold from 2019 until now
Getting started with your JBL Cinema SB130
Quick Start Guide & Downloads
Product Specifications
- Power supply
- 100 - 240VAC, ~ 50/60Hz
- Total speaker power output (Max. @THD 1%)
- 110W
- Soundbar power output (Max. @THD 1%)
- 2 x 27W
- Subwoofer power output (Max. @THD 1%)
- 56W
- Soundbar transducer
- 2 x 2" full range driver
- Subwoofer transducer
- 4", wired sub
- Operating temperature
- 0°C - 45°C
- Max SPL
- 82dB
- Frequency response
- 40Hz - 20kHz
- Audio inputs
- 1 Optical, Bluetooth (USB is for Service only.)
- Soundbar dimensions (W x H x D)
- 900 x 67 x 63(mm) / 35.4" x 2.6" x 2.5"
- Subwoofer dimensions (W x H x D)
- 150 x 320 x 220(mm) / 6" x 12.6" x 8.7"
- Soundbar weight
- 1.5kg
- Subwoofer weight
- 2.8kg
- Packaging dimensions (W x H x D)
- 975 x 170 x 355mm / 38.4" x 6.7" x 14"
- Packaging weight (Gross weight)
- 5.8kg
- Bluetooth version
- 4.2
- Bluetooth profile
- A2DP V1.3/AVRCP V1.5
- Bluetooth frequency range
- 2402MHz-2480MHz
- Modulation type
- GFSK, π/4 DQPSK
- USB port
- Type A
- USB rating
- 5VDC/0.5A
- Supporting file format
- mp3, wav
- MP3 Codec
- MPEG 1 Layer 2/3
- MPEG 2 Layer 3
- MPEG 2.5 Layer 3
- MP3 sampling rate
- 16kHz - 48kHz
- MP3 bitrate
- 80kbps - 320kbps
- 80kbps - 160kbps (MPEG 2.5 Layer 3)
- WAV sample rate
- 16kHz - 48kHz
- WAV bitrate
- Up to 3000kbps
- HDMI Video output (With Audio return channel)
- 1
- HDMI HDCP version
- 1.4
Extra Bass. Powerful sound.
The JBL Cinema SB130 features 110W system power, Dolby Digital, two full range drivers and comes with a wired subwoofer. Enjoy powerful sound with extra deep bass for movies and music entertainment. It’s Bluetooth-enabled so you can play your favorite music wirelessly from any smartphone, tablet or laptop and features a one cable connection with HDMI ARC that ensures a hassle-free user experience.
FAQs & How-Tos
-
If you have a mesh network (more commonly seen in Eero Mesh networks), it is possible that you may experience your satellite speakers or subwoofer intermittently disconnecting from the soundbar. This is similar to normal interference that occurs with products on a similar wireless frequency. The special thing about Eero mesh networks is that they do not allow you to move a device to the 5Ghz or 2.4Ghz band. The system will automatically decide which devices should be on which band and will move them accordingly (switching whenever needed). Some of our soundbars run on a 5Ghz frequency which is where the interference can occur. Since we cannot change the signal in which they operate and we cannot change the band they are connected to via their Eero mesh network, there are a few things you can do to try and stop this from occurring.
- Move the mesh nodes far away from the soundbar
- Use the 2.4Ghz band instead of the 5Ghz band (if your mesh system allows this)
- Ensure to enable/utilize the MU-MIMO setting (not applicable to all mesh systems). Please refer to your router's website to see if MU-MIMO is being utilized by default.
What is MU-MIMO?
MU-MIMO stands for Multi-User, Multi-Input, Multi-Output. This allows for the router to send a signal to multiple devices at one time vs. the previous version in which the router would be able to connect to multiple devices, but only send the signal to one device at a time.
NOTE: You may notice that when the soundbar is turned on, there may be a dip in the immediate internet speed, but it will go back to normal within less than a minute.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)