JBL RALLYBAR XL

JBL RALLYBAR XL

35" Bluetooth® Universal Outdoor Vehicle Soundbar with LED lights and 300Wrms amplifier

Sold from 2023 until now

Getting started with your JBL RALLYBAR XL

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Transducers
8x 2.75”(70mm) woofers, 2x 1”(25mm) Tweeters, 4 x 7.2"(182.8mm) x3"(76.2mm) Racetrack Passive Radiators
Output Power
300WRMS, 600W PEAK (IEC60268)
THD at Rated RMS Power
< 1%
Voltage Range: 9.6 - 16VDC
Quiescent Current Draw
< 0.9A
Maximum Current Draw
40A
Frequency response
45Hz-40kHz
Signal-to-noise Ratio
> 80 dB
Cable type
10 AWG
Cable length
12 Feet (3.66m)
Bluetooth® Version
5.3
Bluetooth® profile
A2DP V1.3, AVRCP V1.6
Bluetooth® transmitter frequency range
2400 MHz – 2483.5 MHz
Bluetooth® transmitter power
≤ 15 dBm (EIRP)
Aux-In
2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)
Aux-Out
2 Vrms (3.5 mm connector)
USB format
FAT16, FAT32
Soundbar Dimension (L x W x H)
35-11/32" x 5" x 4-5/8" (897.5 x 126.7 x 118mm)
Soundbar Weight
20.83 lbs (9.45 kg)
Packaging dimensions (W x H x D)
38.2" x 9" x 7.6" (971 x 229 x 193mm)
Gross weight
27.5 lbs (12.52 kg)

JBL RALLYBAR XL is a IP66 rated water resistant Bluetooth® Soundbar with 300Wrms amplifier, extraordinary sound experience and unique dynamic LED lights to UTVs, golf carts, boats and other vehicles built for recreation. Each RALLYBAR XL can be used by itself or connected to multiple RALLYBAR XL or RALLYBAR XL family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode. The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements. Bluetooth®, USB disk and Aux-in audio players are supported. HI-Resolution Audio for AUX-IN input audio source is available.

Lights, color, party! Transform your off-road journey into a rock concert. Pressing the light controls on the bottom panel will Sync your music to dynamic lights patterns
The 300Wrms (THD <1%) Class- D amplifier ensures powerful, high quality JBL Original Pro Sound when you take the wheel or helm.
IP66 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.
Broadcast Mode allows RALLYBAR XL connect to multiple RALLYBAR XL or RALLYBAR XL family products (RALLYBAR, RALLYBAR S and RALLYBAR XL), allowing each soundbar to play the same audio source.
Party Mode provides simultaneous connection of up to two Bluetooth® devices—while playing music from one device at a time.
With HI-RESOLUTION Audio on wired audio sources, JBL Original Pro sound tuning, and DSP delivers extraordinary sound performance.
The innovative mounting kits design (patent pending), offers multiple position combinations on top and back to accommodate a variety of installation requirements.
When user’s smartphone connected to the JBL RALLYBAR XL and a JBL Click Bluetooth controller (sold separately on JBL Website), you can use the JBL Click to control the music from your smartphone including “play/pause”, “next track”,” volume up/down”.
RALLYBAR XL can detect the audio source automatically according to the source priority definition: USB disk >Bluetooth®> AUX-IN audio source. Higher priority source can break-in Lower priority audio source.
3.5mm auxiliary output (2V) can connect with external powered speakers and subwoofers, which can have changes of volume down/volume up/ play or pause according to Soundbar’s adjustment. The Line output is covered by a waterproof connector.
RALLYBAR XL Offers 3 different Gain settings when connected by Aux-in audio:2V, 4V, and 6V.

FAQs & How-Tos

2 results
  • Party Mode allows for a soundbar to have a simultaneous connection of up to two Bluetooth® devices.

    party mode picture.PNG

    Notes:

    - When the soundbar is turned off, it will only connect the

    device with the latest action automatically. You will need to manually

    connect the second device.

     

    - The maximum amount of devices to be connected at a time is 2. The last action on one of

    the devices will always take the control.

     

    - A third device will not be able to see the soundbar speaker’s name on the list of available Bluetooth devices when there are already 2 phones are connected.

  • To restore your JBL Rallybar/S/XL to factory settings, Press + and  buttons simultaneously for 10 seconds.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a support agent
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat With Us

Chat With Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)