JBL RALLYBAR S
21" Bluetooth® Universal Outdoor Vehicle Soundbar with 150Wrms amplifier
Sold from 2023 until now
Getting started with your JBL RALLYBAR S
Quick Start Guide & Downloads
Product Specifications
- Transducers
- 4x 2.75”(70mm) woofers, 2x 1”(25mm) tweeters, 2x 7.2”(182.8mm) x3”(76.2mm) Racetrack Passive Radiators
- Output Power
- 150WRMS, 300W PEAK (IEC60268)
- THD at Rated RMS Power
- < 1%
- Voltage Range
- 9.6 - 16VDC
- Quiescent Current Draw
- < 0.9A
- Maximum Current Draw
- 25A
- Frequency response
- 45Hz-40kHz
- Signal-to-noise Ratio
- > 80 dB
- Cable type
- 12AWG
- Cable length
- 12 Feet (3.66m)
- Bluetooth® Version
- 5.3
- Bluetooth® profile
- A2DP V1.3, AVRCP V1.6
- Bluetooth® transmitter frequency range
- 2400 MHz – 2483.5 MHz
- Bluetooth® transmitter power
- ≤ 15 dBm (EIRP)
- Aux-In
- 2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)
- Aux-Out
- 2 Vrms (3.5 mm connector)
- USB format
- FAT16, FAT32
- Soundbar Dimension (L x W x H)
- 21-5/32" x 5" x 4-5/8" (537.5 x 126.7 x 118mm)
- Soundbar Weight
- 11.46 lbs (5.2kg)
- Packaging dimensions (W x H x D)
- 24" x 9" x 7.6" (611 x 229 x 193mm)
- Gross weight
- 17 lbs (7.74 kg)
JBL RALLYBAR S is a IP66 rated water resistant Bluetooth® Soundbar with 150Wrms amplifier and extraordinary sound experience to UTVs, golf carts, boats and other vehicles built for recreation. Each RALLYBAR S can be used by itself or connected to multiple RALLYBAR S or RALLYBAR S family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode. The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements. Bluetooth®, USB disk and Aux-in audio players are supported. HI-Resolution Audio for AUX-IN input audio source is available.
FAQs & How-Tos
-
Party Mode allows for a soundbar to have a simultaneous connection of up to two Bluetooth® devices.
Notes:
- When the soundbar is turned off, it will only connect the
device with the latest action automatically. You will need to manually
connect the second device.
- The maximum amount of devices to be connected at a time is 2. The last action on one of
the devices will always take the control.
- A third device will not be able to see the soundbar speaker’s name on the list of available Bluetooth devices when there are already 2 phones are connected.
Was this helpful? Thank you for your feedback! -
To restore your JBL Rallybar/S/XL to factory settings, Press + and ⏵ buttons simultaneously for 10 seconds.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)