Cinema SB350

Cinema SB350

Home cinema 2.1 soundbar with wireless subwoofer

Sold from 2014 until now

Getting started with your Cinema SB350

Getting started with your Cinema SB350

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Bluetooth
Frequency response
45Hz–20kHz
Maximum SPL
100dB
Total Cinema SB350 amplifier power
320W max
Subwoofer Weight (lb)
10.6lb
Subwoofer Depth (mm)
242 mm
Subwoofer Weight (kg)
4.8kg
Subwoofer Width (mm)
242 mm
Speaker Weight (lb)
7.3lb
Speaker Height (mm)
78 mm
Subwoofer Height (mm)
320 mm
Speaker Width (mm)
62 mm
Speaker Weight (kg)
3.3kg
Speaker Depth (mm)
1000 mm

Stunning home theater sound with a wireless subwoofer

Designed to perfectly match any TV. The Cinema SB350 projects stunning, virtual surround sound from a sleek and simple package. It connects wirelessly to its compact, powerful subwoofer, and connects with a single cable to a TV. It also can play music wirelessly from Bluetooth smartphones or tablets. It also remembers up to 10 different Bluetooth devices for instant reconnection. It can learn any TV remote volume control, giving you simplified control over your Home Cinema experience. A wall or table EQ button calibrates the SB350 for any type of installation and independent volume control of the subwoofer lets you customize bass response to your personal taste.

Sleek and compact, the soundbar and wireless subwoofer complement the look of today’s razor-thin flat screens, while projecting a deep, rich, enveloping sound that’s unmatchable with a TV’s built-in speakers.
Adjust the 160watt built-in amplifier from a tremor to an earthquake directly from the remote control. Place it optimally in any room without wires or clutter.
For true plug-and-play home theater, HDMI ARC technology connects your compatible TV and the JBL Cinema SB350 with a single cable. It is also equipped with optical and analog audio inputs.
Harman Volume makes sure that sudden volume changes—such as commercials—will be smooth and consistent. You won’t have to constantly adjust your volume to enjoy what you are watching.
Harman Display Surround sound and Dolby Digital decoding fill your room with movie sound and music, not speakers and wires.
The JBL Cinema SB350 remembers up to 10 Bluetooth devices and can instantly reconnect for music streaming.

FAQs & How-Tos

5 results
  • The most important thing, is to be sure that both blue LEDs must flash quickly, one on the center speaker, one on the subwoofer. If just one of these LEDs does not flash quickly, pairing cannot take place. If it is difficult to make one of the LEDs change to quick flash, it may be that the button is held too long, or not pressed in the right angle. Try again with a short, firm press less then a second.
  • It is usually not necessary to replace an unresponsive remote control. First, check to see if there is a small plastic tab extending out of the base of the remote control. This is a protective sleeve installed on new remote controls to prevent the battery from draining. Pull this tab to remove the plastic sleeve. The sleeve must be removed before the remote will operate. If the sleeve was removed or not present and the remote control is not working then a new battery should be installed before replacing the remote control. There is a small slide out drawer that houses the battery. The battery type will be either CR2025 or CR2032 for remotes of this size. Replacement batteries are commonly available from most electronic and convenience stores that sell small batteries. Check the number on the original battery and replace it with a battery that uses the same number. These steps will typically solve the problem.
  • Reset the Soundbar by the same process as when doing "reset remote settings": 1. Switch the SB 350 ON. 2. Press and hold the Surround and Volume (–) buttons simultaneously for about 3-4 seconds, then let go. The Source selection Button flashes amber, followed by the power button and source buttons flashing several times. 3. The soundbar is now reset.
  • With HARMAN Volume you can set your desired volume between low, medium and high. You can listen to your audio without sudden distracting changes such as blasts from ads, and volume variations as you switch between channels on your TV. Other benefits include full sound effects even at low volumes, this means if you are watching movies (DVD, BlueRay disc) and HARMAN volume is set to low volume, then the signal is more compressed, than what the other volume levels is. This will allow you to hear natural, consistent sound at low volume level, and not only hearing voice conversation from movies, giving you the same movie experience just with lower volume. What is best for you is a matter of personal preference, so we recommend playing around with the three different levels.
  • The SB 250 has optical and auxiliary connections, while the SB 350 has both connections along with HDMI ARC. The SB 250 has the JBL SoundShift feature (one-button switch between TV and Bluetooth connection), while the SB 350 does not. Compared to the SB 250, the SB 350 has a more powerful subwoofer amplifier. The bigger amp will provide listeners with more bass response.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a support agent
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat With Us

Chat With Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)