Cinema SB200
120-watt, wireless Cinema soundbar
Sold from 2012 until now
Getting started with your Cinema SB200
Quick Start Guide & Downloads
Product Specifications
- Bluetooth
- Enclosure type
- Ported
- Speaker Frequency Response
- 60Hz - 20kHz (-6dB)
- Speaker Maximum Recommended Amplifier Power
- 60 watts peak per channel
- Speaker Weight (lb)
- 11.5
- Speaker Width (in)
- 35-1/2
- Speaker Depth (mm)
- 103
- Speaker Weight (kg)
- 5.1
- Speaker Height (in)
- 4-9/16
- Speaker Depth (in)
- 4-1/6
- Speaker Height (mm)
- 116
- Speaker Width (mm)
- 901
- Dimensions (H x W x D)
- 4-9/16" x 35-1/2" x 4-1/16" (116 mm x 901mm x 103mm
- Weight
- 11.5 lb. (5.1kg)
- Power Consumption (Full Power/Idle)
- 60W (maximum)
- Power Consumption (Standby)
- less than 0.5W
- Amplifier Power (RMS)
- 60 watts peak per channel
- Power Requirement
- 100V - 240V, 50Hz/60Hz, 60W
- Speaker Low-Frequency Transducer
- One 3-1/2" (89mm) cone per channel
- Speaker Enclosure Type
- Ported
- Speaker High-Frequency Transducer
- One 1" (25mm) dome per channel
High-performance soundbar with Bluetooth technology and powerful bass.
You’ve got a high-definition, flat-panel TV screen that flawlessly displays all the grandeur of your video the way that its creators intended. But how about the audio? Unfortunately, these screens don’t come with speakers that match the brilliance of their video. The JBL® Cinema SB200 provides you the outstanding JBL sound that we install in movie theaters throughout the world – and does it without compromising space or style. This two-channel soundbar speaker features dual 3-1/2-inch (89-millimeter) woofers, two 1-inch (25-millimeter) tweeters, a built-in amplifier that offers up to 120 watts, HARMAN Display Surround technology for 3D sound and dual-positioning equalization that optimizes the soundbar’s performance based on its location. Its high-excursion drivers and precision bass port work to deliver powerful, resounding bass, so there’s no need to add a separate subwoofer. But what makes the SB200 even more impressive is its integrated Bluetooth® technology, which allows you to stream music easily from digital audio devices such as your iPhone, iPad, smartphone, tablet, MP3 player, laptop or personal computer. But more than providing you with exceptional sound, the SB200 also looks fabulous. Able to complement flat-panel TVs that are 32 inches (812 millimeters) and larger, the JBL Cinema SB200 is ready to grace your living room with powerful bass and beautiful sound.
FAQs & How-Tos
-
Make sure the optical connection is seated securely on the SB200 and on your device. Go into your device settings and make sure the digital output is enabled. On TV displays the option usually states "enable external speakers" or enable "digital audio output".Was this helpful? Thank you for your feedback!
-
It is usually not necessary to replace an unresponsive remote control. First, check to see if there is a small plastic tab extending out of the base of the remote control. This is a protective sleeve installed on new remote controls to prevent the battery from draining. Pull this tab to remove the plastic sleeve. The sleeve must be removed before the remote will operate. If the sleeve was removed or not present and the remote control is not working then a new battery should be installed before replacing the remote control. There is a small slide out drawer that houses the battery. The battery type will be either CR2025 or CR2032 for remotes of this size. Replacement batteries are commonly available from most electronic and convenience stores that sell small batteries. Check the number on the original battery and replace it with a battery that uses the same number. These steps will typically solve the problem.Was this helpful? Thank you for your feedback!
-
This problem is usually caused by pressing down too hard on the soundbar's VOL + or VOL - Buttons. Only press just enough for one click to be felt. If a second click is felt in the button, you are pressing too hard, and you are actually activating the MUTE function for learning, not VOL up or down. You may have to repeatedly let go of the VOL button on the soundbar, followed by pressing it again and then pressing the VOL button on the TV remote before the surround light on the soundbar lights up white and goes back to amber flashing, as a sign that this function has been learned. This is no problem, though. Just keep trying until the three commands have been learned. The soundbar only exits learning mode when you press and hold the surround button as the final step.Was this helpful? Thank you for your feedback!
-
If you have a mesh network (more commonly seen in Eero Mesh networks), it is possible that you may experience your satellite speakers or subwoofer intermittently disconnecting from the soundbar. This is similar to normal interference that occurs with products on a similar wireless frequency. The special thing about Eero mesh networks is that they do not allow you to move a device to the 5Ghz or 2.4Ghz band. The system will automatically decide which devices should be on which band and will move them accordingly (switching whenever needed). Some of our soundbars run on a 5Ghz frequency which is where the interference can occur. Since we cannot change the signal in which they operate and we cannot change the band they are connected to via their Eero mesh network, there are a few things you can do to try and stop this from occurring.
- Move the mesh nodes far away from the soundbar
- Use the 2.4Ghz band instead of the 5Ghz band (if your mesh system allows this)
- Ensure to enable/utilize the MU-MIMO setting (not applicable to all mesh systems). Please refer to your router's website to see if MU-MIMO is being utilized by default.
What is MU-MIMO?
MU-MIMO stands for Multi-User, Multi-Input, Multi-Output. This allows for the router to send a signal to multiple devices at one time vs. the previous version in which the router would be able to connect to multiple devices, but only send the signal to one device at a time.
NOTE: You may notice that when the soundbar is turned on, there may be a dip in the immediate internet speed, but it will go back to normal within less than a minute.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)