|Maximum music playing time (hrs)||8|
|Output power (W)||5|
|Dimensions (cm)||16.5 x 6.6 x 6.6|
|Dimensions (in)||6.49 x 2.59 x 2.59|
Control Connect Specifications
Documents & Downloads
Quick Start Guide
What’s in the Box
- 1 x JBL Tuner
- 1 x USB cable
- 1 x 5V/1A Adaptor
- 1 x Quick-Start Guide
- 1 x Safety sheet
- 1 x Warranty card
FAQs & How-Tos
How to check Firmware VersionTo check the firmware version:
Press and hold the 'Preset 1' & 'Preset 5' buttons for more than 10 seconds.
How can I reset my JBL Tuner to factory default settings?
To reset your JBL Tuner simply Long press Volume+ and Bluetooth button for 5-7 seconds. Your Tuner is now successfully reset and you can Bluetooth pair with it again.
How to show the current software versionTo show the current firmware version on your JBL TUNER device, go through the following steps.
- Turn on the JBL TUNER.
- Press and hold this three-button combination: DAB/FM+ Volume+ and Preset 5, simultaneously for 3-4 seconds.
- In the display, you will see a combination of letters and numbers. This is the current software version.
- See picture below as illustration.
The new firmware version released is V.0.0.57 (shown in the picture above).
To get the latest version, ask our customer service for a guide and an upgrade file.
Can’t find what you’re looking for?
Talk to a product expert
Call us now at: (800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)
Chat With Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)