JBL Flip 3
|Maximum music playing time (hrs)||10|
|Output power (W)||2 x 8|
|Signal-to-Noise Ratio||Less than 80dB|
|Frequency Response||85Hz – 20kHz|
|Output power||2 x 8W|
|Dimensions (cm)||6.4 x 16.9 x 6.4|
|Dimensions (in)||2.5 x 6.7 x 2.5|
|Transducer||2 x 40mm|
Control Connect Specifications
Documents & Downloads
Quick Start Guide
What’s in the Box
- 1 x JBL Flip 3
- 1 x Micro USB Charging Cable
- 1 x Quick Start Guide
- 1 x Safety Sheet
- Warranty Card included
FAQs & How-Tos
Which JBL portable Bluetooth speakers have the JBL voice integration with SIRI and Google Now feature?
JBL Xtreme, JBL Pulse 2, JBL Charge3, JBL Flip 3, Pulse 3, and Flip 4 Android, Google Now, Google Play are trademarks of Google Inc. Siri, iTunes, and Apple Music are trademarks of Apple Inc. Spotify is a registered trademark of Spotify AB. IOS is a registered trademark of Cisco in the US and is used by Apple under license.
My Flip3 got dirty after a day on the beach. Can I rinse it under the faucet or shower?
Yes, rinse it under a faucet or under the shower, but not under full water pressure.
What is the latest software version available for Flip 3?
Software version v.7.9 is the latest for the Flip 3
If I pair my Bluetooth speaker to my phone, and record a video with the phone, will the speaker's microphone serve as audio source?
No, all recordings made on the telephone will be using the telephone's built-in microphone. Replay of the recording will be heard over the speaker afterwards, though, as long as it is paired to the telephone.
Can I wirelessly link JBL Flip 4 together with JBL Flip 3, Pulse 2 or Xtreme?
No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ feature
I want to do a stereo setup. Can I use any Connect-equipped speaker for this?
Only identical Connect-equipped speakers can be used a true stereo pairs. Speakers that are not identical will play double mono.
Does the Flip 4 fit into the Flip 3 carrying case?
No, the Flip 3 carrying case is too small. At the moment, no carrying case is available for Flip 4. We suggest that you check out manufacturers that specialize in this kind of accessory.
How do I connect my Flip 3 or Flip 4 to Bluetooth sources?
Turn the FLIP3 or FLIP 4 on by pressing the power button. If your FLIP hasn't been connected via Bluetooth before, it will start up in pairing mode. To put it in pairing mode, hold down the Bluetooth button for atleast 3 seconds, until the light flashes blue. You are now in pairing mode. Locate the FLIP on your device and pair them together. The two devices will sync together and you will hear a tone from the FLIP indicating it is successful.
How do I use the unit as a microphone/speaker?
Make sure your device is paired with a mobile device. When receiving a call, press the phone button to answer the call. You can now use it as a speakerphone.
Does it have automatic standby?
Yes, after approximately 10 minutes of no activity and no audio, the unit goes into sleep mode. It must be awakened with the ON/OFF Button. It is not possible to wake it up with a Bluetooth pairing signal. After 20 minutes of no activity and no audio, the unit will power off.
PartyBoost support on the JBL Connect and JBL Connect+
The new PartyBoost does not support the previous Connect and Connect+ features. For example: You will not be able to successfully connect the new PartyBoost enabled Flip 5 with a Connect+ enabled speaker like the Pulse 3 or Flip 4. You will not be able to connect the Boombox 2 to the original Boombox speaker.
Why do I get an orange charger cable with my blue Flip3
Orange cable is JBL signature color!
What do the LED indicators show?
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.
How can I check the software version on my Flip3, Flip4 or Xtreme??
By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.
I have a JBL Xtreme, would it be possible to connect that to my FLIP3?
Yes, if you are using our new feature JBL Connect. It will allow up to two products that have this feature, to be connected together. Connect to one of your speakers via Bluetooth or AUX source, press the JBL Connect button on the speakers. A sound will come when they are connected. You are now able to see them connected in the JBL Connect app.
How long does the battery last?
The battery has 10 hours of playtime, but of course depending on usage (Bluetooth on, volume level, etc.)
Can i connect 3 or more speakers together with JBL Connect?
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL Connect
How to reset: Flip 2, Flip 3, Clip 2In power ON mode press and hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds -> Unit will power Off by itself.
Now the unit is reset to factory default.
When using JBL Connect, how far can i take the second speaker with me?
JBL Connect feature is using Bluetooth technology, so it is hard to say how far you can walk away. Depending on what other signals you have at your place that could interupt and wall material between speakers.
Which JBL products have the Connect technology
The first JBL speakers featuring the JBL Connect technology are: JBL Flip 3, JBL Pulse 2, JBL Xtreme, JBL Boost TV and JBL Charge 3, SB 450 A firmware upgrade is available for the JBL Charge 3 ,which will upgrade Connect to JBL Connect+. After this fw upgrade, it is no longer possible to connect the Charge 3 with other products which have JBL Connect ( Flip 3, Boost TV, Pulse 2, Xtreme )
Can I use my Flip3 outside in rainy weather?
Yes, this is no problem.
Buttons unresponsive when plugged into a power sourceIf the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.
What can I do with the Connect app?
It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect or Connect+ compatible speaker, this can be installed through the app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect App
Can I place my Flip3 in the bathroom, where it is humid, and it may be splashed with water?
Yes, steam and drops of water in a bathroom are fine.
Can I change the name of my speaker?
Yes, the JBL Connect App allows you to change the name of your speaker.
Why is there no battery charger in the box?
This is because standard USB charging is possible from so many sources and chargers, and also from computers. There is a charging cable in the box, which permits charging from all USB chargers of at least 1A capacity.
How do I activate the SIRI® and Google Now™ voice assistant integration on my JBL Flip 3
1. Download and run the latest JBL Connect app on your phone 2. The JBL Connect app will begin discovering your JBL Flip 3 (please make sure your speaker is connected via Bluetooth first) 3. Click on the software update and plug your speaker into a power source during the update 4. Once the upgrade is successful, use the toggle switch to change the phone button to now have the voice assistant function 5. Simply press the phone button on your JBL Flip 3 (you will hear a brief tone) and begin speaking your commands via SIRI and Google Now. Please check the below links for more information regarding SIRI and Google Now available voice commands: SIRI: https://support.apple.com/HT204389 Google Now: https://support.google.com/websearch/answer/2940021 Android, Google Now, Google Play are trademarks of Google Inc. Siri, iTunes, and Apple Music are trademarks of Apple Inc. Spotify is a registered trademark of Spotify AB. IOS is a registered trademark of Cisco in the US and is used by Apple under license.
Whats in the box?
What?s included: ? 1 JBL Flip3 stereo speaker with Bluetooth technology ? 1 Micro USB Charging cable ? 1 Safety sheet ? 1 Carry strap ? 1 Quick Start Guide
My Flip 3 does not respond after update. What can I do?
Try below steps. Attach the charger so the device is charging. While charging: First try to hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds (this resets the Flip 3 to factory settings). If this does not help, press and hold the "Volume +" and "Link" buttons for more then 10 seconds (this will exit demo mode). As a last step, short press on the "Volume -" & "Volume +" & "Phone" buttons. If the device will still not turn on, it has a defect.
How can I connect two JBL Connect compatible speakers together?
Please press JBL Connect buttons on both speakers to connect.
Can’t find what you’re looking for?
Talk to a product expert
Call us now at: (800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)
Chat with Us
24/7 help with your order and information about our products