


JBL Flip 5 Eco edition
Same bold sound. New bold design – made from 90% recycled plastic.Take your tunes on the go with the powerful JBL Flip 5 Eco edition. Our lightweight Bluetooth speaker goes anywhere. Bad weather? Not to worry. With its waterproof design, you can rock out to our Signature Sound rain or shine. Move more. Pair two JBL PartyBoost-compatible speakers together for stereo sound or link multiple JBL PartyBoost-compatible speakers to create a bigger party. Enjoy more than 12 hours of play time for your favorite music.
Product Specifications
General Specifications
Output power (W) | 20 |
---|
Audio Specifications
Dynamic frequency response range (Hz) | 65 Hz - 20k Hz |
---|
Dimension Specifications
Dimensions (in) | 7.1 x 2.9 x 2.7 |
---|---|
Dimensions (cm) | 18 x 7.4 x 6.9 |
Weight (kgs) | 0.5 |
Weight (lbs) | 1.2 |
Control Connect Specifications
Bluetooth profiles | A2DP V1.3, AVRCP V1.6 |
---|---|
Bluetooth frequency | 2.402 – 2.480GHz |
Bluetooth transmitted modulation | GFSK, π/4 DQPSK, 8DPSK |
Bluetooth transmitter power | 0-11dBm |
Bluetooth version | 4.2 |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery







Videos
What’s in the Box
- 1 x JBL Flip 5
- 1 x Type C USB cable
- 1 x Quick-Start Guide
- 1 x Safety Sheet
- 1 x Warranty Card

FAQs & How-Tos
How to restore your speaker to factory default settings
If you encounter issues using the speaker with your phone or tablet, or you want to remove all previous Bluetooth pairings from the speaker, it may be necessary to 'factory reset' the speaker.
How to reset
First, remove or forget the speaker from the list of paired Bluetooth devices in the settings of the phone or tablet.
Then, with the speaker powered on, press and hold the Volume + and Play buttons simultaneously for 3 seconds until the unit turns off.
The speaker has now been restored to factory default settings.
How to reset
First, remove or forget the speaker from the list of paired Bluetooth devices in the settings of the phone or tablet.
Then, with the speaker powered on, press and hold the Volume + and Play buttons simultaneously for 3 seconds until the unit turns off.
The speaker has now been restored to factory default settings.
Was this helpful?
Thank you for your feedback!
Does this speaker have an Aux Input?
This speaker does not have an Aux Input, so no analog connection is possible.
Was this helpful?
Thank you for your feedback!
Buttons unresponsive when plugged into a power source
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)
Chat With Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)