C563DT
6-1/2" Dual-Tweeter In-ceiling Loudspeaker
Getting started with your C563DT
Quick Start Guide & Downloads
Product Specifications
- Height
- Cutout dimensions (dia.)
- Width
- Square grille finished Weight
- Depth
- Mounting depth
- Weight
- 2.2 lb (1 kg) / Shipping weight
- Features
- Includes both round and square zero-bezel magnetic grilles • Round grille finished dimension (dia.)
- High Frequency Driver Components
- Two 1" aluminum dome tweeters with waveguides
- Low Frequency Extension
- High Frequency Extension
- Low Frequency Driver Components
- 6 ½" Micro-Ceramic Composite (MCC) Cone, Cast-Aluminum Frame Woofer
- Mounting
- C-2 fastening mechanism • Compatible with wall material thickness range
- Recommended Amplifier Power
- 10 - 130 Watts RMS (per channel)
C563DT
Revel in-ceiling loudspeakers draw upon the same research, resources, and unique perspectives that put all our loudspeakers in a class by themselves. Each model offers a standard-setting low sonic coloration and freedom from distortion over a wide dynamic range.
FAQs & How-Tos
4 results
-
No, in-ceiling speakers cannot be used in the wall due to speaker dimensions. A wall is not deep enough to accommodate the depth of an in-ceiling speaker. For in-wall speakers, you can install them in the ceilings without any depth issues. However, for quality listening, we recommend using architectural speakers according to their intended purpose.Was this helpful? Thank you for your feedback!
-
Speakers will dual tweeters gives listeners the ability to have a single speaker to drive two independent channels, ideally stereo left and right. Dual tweeter speakers are usually used for in-ceiling audio applications. They have four terminals (two sets of positives and negatives) used to plug in speaker wires from the amplifier.Was this helpful? Thank you for your feedback!
-
In-wall speakers will work better for stereo listening because the speaker will be facing directly at you instead of above you. Note: Stereo imaging requires the listening position (“sweet spot”) to be dead center, equal distance, from the front left and right speakers.Was this helpful? Thank you for your feedback!
-
All of our in-wall/in-ceiling speakers are designed to be used in a wall without the need for a back-box. The specs provided are based on no back-box. However, when adding a back-box (really only possible when doing new construction), you will improve the low frequency response a bit, getting a tighter bass response.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)