JBL Quantum Stream Talk

JBL Quantum Stream Talk

USB streaming microphone

Sold from 2023 until now

Getting started with your JBL Quantum Stream Talk

Getting started with your JBL Quantum Stream Talk

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Power required/consumption
5 V ⎓ 500 mA
Frequency response
50 Hz - 12 kHz
Sensitivity
-47±3 dB (1 kHz@1 Pa, 0 dB = 1 v/Pa)
Maximum SPL
110 dB
Sample rates
44.1kHz / 48kHz / 96kHz
Bit rate
16 / 24 bits
Capsules
6 mm Electret Condenser Microphone
Polar patterns
Super-Cardioid
Headphones Amplifier Impedance
16 ohms / 32 ohms
Headphones Power output (RMS)
23 mWrms per channel (Load = 32 ohms)
Headphones THD
<0.5% (Load = 32 ohms)
Headphones Frequency response
20 Hz - 20 kHz
Headphones Signal to noise
92 dB (A-weighted)
Dimensions Mic with Stand (L x W x H)
10.5cm x 10cm x 18.5cm / 4.13" x 3.94" x 7.28"
Weight Mic with Stand
146g / 0.322lbs

Sound is survival Let your voice be heard

Whether you're a streamer broadcasting your games on Twitch or a podcaster with a growing audience, the JBL Quantum Stream Talk will make sure your voice gets heard. The super cardioid pickup pattern of this sleek, functional design makes it perfect for a single voice, ensuring that any random noises elsewhere in the room won't get heard. A built-in shock absorber in the sturdy microphone stand also helps make sure your streams and recordings are as noise-free as possible. Monitor the audio stream in your headphones via the 3.5mm connection and the multi-function control knob, which also adjusts the mic's gain and loudness and quickly mutes you if a cough or sneeze creeps up on you. Use the included JBL QuantumENGINE PC software to adjust EQ, apply noise reduction, and perform a quick mic test, all from your computer screen.

Your voice will come through loud and strong thanks to a lightweight, fast-moving diaphragm that's sensitive (-44dB) and has a wide, flat frequency range (50~12kHz). At 96kHz/24 bits recording, your streams and recordings will sound better and capture every nuance of what you're saying.
You won't pick up random sounds around the room, because the super cardioid pick-up pattern is hyper-focused on your voice. Just like your audience will be.
Press the center of the control knob to mute yourself momentarily. The LED lights at the top of the mic tube will change into red, so you'll always know when you're on mute. Unlike some of your coworkers during Zoom meetings.
The same knob controls both the mic gain (how loud your voice is going into the mic) and the headphones' volume (how loud your voice is heard in your headphones), so you can fine-tune how you sound even in the middle of a streaming or recording session.
Tend to pound the table when you're making a great point on your podcast? The built-in shock absorber in the microphone's base will keep your audience from hearing any weird thumping sounds when you do.
Plug into your laptop, desktop computer, or digital mixing board with the included USB-C cable and start talking. It's that simple.
Adjust the position of the microphone easily with the ball joint attaching the mic to the stand.
With the included JBL QuantumENGINE software, you can quickly adjust EQ and gain to fine-tune your sound, mute and unmute yourself, apply noise reduction, and perform a quick mic test, all from your computer screen.

FAQs & How-Tos

5 results
  • You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.
  • Sidetone is off by default.

    To enable sidetone on your JBL Quantum Stream microphone, install and start JBL QuantumENGINE, and head to the "Microphone" tab.

    Here you can select sidetone level from 0 to 3 (0 = off). 

  • You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.
  • If your teammates can not hear you, make sure of the following:

    USB is correctly plugged in
    Only one voice chat application is in use while in-game.
    The mic input is set to JBL Quantum Stream.
    Mic gain is not turned all the way down
    Mic is not muted (mute/unmute by pressing the touch panel on top of the mic). By default the RBG will indicate red for muted, and green for unmuted(active).

     

  • JBL Quantum 300, 350, 400, 600, 610, 800, 810 ONE, TWS and Stream are working with the QuantumENGINE

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a support agent
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat With Us

Chat With Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)