How To

Support Overview / How To

How To

1217 results
  • Can I check the software version on my Boost TV?
    Yes, press Volume - and Connect button at the same time for 5 seconds. A voice reads out a set of numbers, which is the current software version. Using the HID Software Tool, available in the Manuals & Downloads section, you can find out if an update exists, and if so, install the update.
  • Can I connect 2 separate devices to the SB 250 AUX and optical Inputs?
    SB 250 will only pass one connection at a time. If two connections are playing at the same time, then the optical device will take priority.
  • Can I connect 2 separate wired devices to the Boost TV AUX and optical Inputs?
    Yes, you can definitely connect two wired devices at the same time. However, the Boost TV will only pass one connection at a time. If two connections are playing at the same time, the optical device will take priority.
  • Can i connect 3 or more speakers together with JBL Connect?
    No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL Connect
  • Can I connect Clip2 to a computer.
    Yes. Connect Bluetooth or auxiliary. Remember that Bluetooth can only work if the source supports A2DP stereo audio streaming, which may not be the case for all computers.
  • Can I connect more than one Bluetooth device?
    You can connect up to 3 Bluetooth devices at the same time. In case you are listening to music via Bluetooth, each device will override the other when a command (play) is selected.
  • Can i connect more than one Bluetooth device to my Control X wireless?
    No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.
  • Can I connect more than one Soundgear to the BTA transmitter?
    No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.
  • Can I connect multiple devices to the Flip 3 SE?
    No, it's not possible to connect simultaneously from multiple devices to the Flip 3 SE. If you need a new device to pair with the Flip 3 SE, please press the Bluetooth button the Flip 3 SE to enable pairing mode. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tablet
  • Can I connect my Control Xstream speakers to 5GHz Wi-Fi?
    Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.
  • Can I connect my EON speaker to a computer with Bluetooth?
    Yes, provided that your computer supports A2DP Stereo audio streaming over Bluetooth, you can connect to JBL EON 208P and EON ONE. If your computer can connect to a mouse, a keyboard or a printer with Bluetooth, but not the EON speaker, please check if A2DP is supported. If it is not, ask the provider or manufacturer of your computer how to establish A2DP support.
  • Can I connect my Soundgear with analog jack cable, or other cables?
    No, Soundgear is wireless Bluetooth only, and needs to be charged to play music. But the BTA 20 transmitter must of course be connected with a cable to the signal source.
< 1 ... 6 7 8 9 10 ... 102 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a support agent
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat With Us

Chat With Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)