How To

BAR 5.1 SURROUND
Software Update Release Notes

------------------------------------------------------------------------
Version:  23.25.51.00
Release Date:  June 28, 2023

• Enhance software security

------------------------------------------------------------------------
Version:  22.49.21.00
Release Date:  December 21, 2022

• Fix Fire TV volume bar display 

------------------------------------------------------------------------
Version:  20-43-51-00
Release Date:  December 18, 2020 

• Improves Soundbar HDMI ARC inter-operability
• Enables Alexa MRM (Multi-Room Music) functionality.
• Download the “JBL BAR Setup” App onto your Android or iOS smartphone/tablet to setup WiFi and link it to your Alexa account to enjoy this new feature.

BAR 700

Software Update Release Notes

------------------------------------------------------------------------

Version:  24.15.21.80.00

Release Date: May 10, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Improve calibration flow
2. Add Amazon HD Music support in JBL One app
3. Improve HDMI eARC/ARC compatibility

BAR 800 & BAR 1000
Software Update Release Notes
------------------------------------------------------------------------
Version:  V 24.33.31.80.00
Release Date:  August 20, 2024
Release Media:  OTA (over the air) Automatic Update

What’s New

1. Improve rear speaker charging performance when docked

 

------------------------------------------------------------------------

Version:  V 24.15.21.80.00
Release Date:  April 18, 2024
Release Media:  OTA (over the air) Automatic Update

What’s New

1. Improve calibration flow
2. Add Amazon HD support in JBL One App
3. Improve HDMI eARC/ARC compatibility

------------------------------------------------------------------------
Version:  V 22.34.55.80.00
Release Date:  September 09, 2022
Release Media:  OTA (over the air) Automatic Update
Filename:  JBL_Bar_800_1000_ver_22.34.55.80.00.zip

What’s New

1. Improved the LED display behavior for a better user experience.
2. Optimized the charging experience for the detachable surround speaker.
3. Improve Wi-Fi music streaming connectivity.

BAR 9.1
Software Update Release Notes
------------------------------------------------------------------------
Version:  V22.01.31.80
Release Date:  May 19, 2022
Release Media:  OTA (over the air) Automatic Upgrade and/or USB
Filename:  JBL Bar9.1 TWS ver 22.01.31.80.zip

1. Fixed a grouping issue with other Chromecast built-in speakers (read below):
   1. 3rd party Chromecast built-in speakers using a Google SDK less than 1.52GM2 can not be grouped with 1st party Google speakers any longer. This update brings the Bar 9.1 up to 1.52GM2, which means once again, it can be grouped with 1st party Google speakers
2. Software update resolves the issues with the "Google Home" app if you are using an Android phone (read below):
   1. Speakers with an SDK less than 1.52GM2 set up with a Google Pixel phone need to use a new, additional app called the "Device Utility app" to complete the Wi-Fi setup. After this update, customers may use the Google Home app as normal for Wi-Fi setup
3. General software and performance improvements:
   1. Sometimes there was a 0.5sec audio drop during ARC streaming with PCM format, now improved!
   2. Import MTK patch to solve continuous distortion after connecting Apple TV to a Sony TV while playing PCM stream in eARC source.

Note:  This software upgrade is not applicable for JBL Bar 9.1 China version.
注意：此软件升级不适用于JBL Bar 9.1中国版。

------------------------------------------------------------------------
Version:  V21.23.11.80
Release Date:  June 8th, 2021
Release Media:  OTA (over the air) Automatic Upgrade and/or USB
Filename:  JBL Bar9.1 TWS ver 21.23.11.80.zip

1.    Improve calibration success rate in some cases.
2.    Improve compatibility of some “ATMOS” Netflix streaming content. 
3.    Improve LED Display messages.

Note:  This software upgrade is not applicable for JBL Bar 9.1 China version.
注意：此软件升级不适用于JBL Bar 9.1中国版。

------------------------------------------------------------------------
Version:  V21.13.11.80
Release Date:  April 8, 2021
Release Media:  OTA (over the air) Automatic Upgrade and/or USB
Filename:  JBL Bar9.1 TWS ver 21.13.11.80.zip

• Improves Soundbar Optical, HDMI, and ARC Compatibility with TV.
• Improves Bluetooth connectivity for mobile devices.
• Improved LED Display Messages.
• Bug fix to remove detachable speakers battery level checking due to imprecise readings.

NOTE:  This software update is not applicable to the JBL BAR 9.1 China version.

注意：此软件升级不适用于JBL Bar 9.1中国版。
 

The Mute+ATMOS combination button press to determine the Battery Status was originally designed for production line testing, not for consumer usage.  We determined that this testing method was inaccurate and began testing using specialized external equipment.  As of Software Version V21.13.11.80, the ability to check Battery Status inaccurately has been removed.

When charging the satellite speakers you can be confident that the Battery Status is 100% when the LED indicator goes  out.  As well, when the LED begins blinking red, you are at 20% and should recharge or plug in your speakers.

A dedicated bass boost button located on the RIGHT ear cup on the CLUB 950NC & 700BT increases low-end frequencies of 5-6 dB adding a kick to your favorite tracks.

The BASSPRO GO receives is power ONLY from the harness that is connected to the car battery.  When connected to the harness, the car battery will charge the internal battery so that it is ready to be used as a portable the next time you need it.

When removed from the harness, the full-range portable speaker runs on the internal battery.  It cannot be charged via either of the USB (A or C) jacks.  It will be charged the next time it is connected to the harness in the vehicle.
 

The BASSPRO GO uses the original Connect feature.  It is not compatible with devices using the Connect+ or PartyBoost feature.  You can connect up to two BASSPRO GO speakers to each other using Connect, or you can connect a single BASSPRO GO to other JBL speakers that have the same Connect feature, like the Xtreme, Charge 3, Flip 3, and Pulse 2.
 

Installation of a powered subwoofer/speaker in an automobile requires specific knowledge and experience.  If you’ve read the manual and do not feel comfortable performing the installation and setup yourself, we recommend that installation be carried out at a specialized center by a professional.
 

Many Harman Kardon, JBL and AKG products run on rechargeable batteries. In most cases, these batteries will provide years of excellent service and keep the music playing for many hours.

WARNING – the rechargeable batteries inside our products are not user-serviceable. Please do not attempt to open the product or replace the battery. Doing so will void your warranty.

Battery issues fall into three categories:

• Your speaker or headphones run out of power after only a short time.

• The speaker will not play at all because the battery will not hold a charge.

• When you plug in the cable to charge your speaker, sometimes it charges and sometimes it does not- the red charging LED or other indicator might not come on.

  Here are some things to try that often fix these issues.

1. It could be as simple as a bad USB charging cable. If you have other charging cables, give them a try. (Be sure that the cable has the same type of connector as the original one that came with your product.)

2. Same for the charger- if your product charges by USB, try a different USB charger. Be sure that it is rated at least 2.0a (2 amps) output.

3. Try other electrical outlets at your location to be certain it is not a local wiring issue.

4. Charge the product overnight for at least 8 hours.

5. When you plug the charging cable into the speaker or headphones, is the connector stable, or can it be wiggled around? If it can be wiggled, this could indicate that the charging port has been damaged or come loose. Sometimes wiggling the connection restores charging power.

IMPORTANT: Some products such as Xtreme, Xtreme 2, Boombox, Partybox 100 & 300, GO+Play and the Onyx Studio series do not use USB charging. Instead, they have a specialized charger. Do not attempt to charge these products with other cables or chargers.

If none of these fixes the issue, it could be that the battery has died or is losing its capacity, or that the charging connector on your speaker is damaged. Please contact us so we can assist you. Be sure to mention that you have tried the steps in this Battery & Charging FAQ so that our agents do not ask you to repeat these steps.

The Boombox 2 features the same battery capacity as the first generation Boombox. The Boombox 2 battery specs have recently been changed in measurement specifications but still provides up to 24 hours of audio playback.

Harman continuously strives to improve the performance of our speakers through software updates in the JBL Portable App. To optimize battery life and performance for your speaker, please perform a software update:
First download the JBL Portable App from the App store or Google Play store to your mobile device.
Then connect to the speaker by Bluetooth.
Open the JBL Portable App and select settings to check and install the new Software version.
The red dot indicates the presence of an update (see image below).