How To

Support Overview / How To

How To

1203 results

Sort

Page size

Do these headphones have volume control?

Yes, the Reflect Aware features a three button inline microphone that allows you to control the volume.

Was this helpful? Thank you for your feedback!
Do the UA Train headphones support AptX low latency?

No. UA Train does not support AptX™ and AptX HD™ audio codecs.

Was this helpful? Thank you for your feedback!
Do you deliver overseas?

We do not ship internationally.

Was this helpful? Thank you for your feedback!
Do you have replacement cables available for my Everest headphones?

Cables and other spare parts for EVEREST can be obtained from either the distributors or from authorized service centers. Please contact Harman Customer Support to get the necessary contact details.

Was this helpful? Thank you for your feedback!
Do you have to be connected bluetooth for the calling features to work?

Yes. Pair your device with the speaker via bluetooth.

Was this helpful? Thank you for your feedback!
DSP 4086 Tuning Software Crashing/Not Responding
If your DSP Tuning Software is not responding properly or is crashing, it is likely because the proper USB driver has not yet been installed. There is an easy fix for this, and it does not require you to uninstall anything.
1. If the tuning software is open, close it.
2. Go back to your software install files and double-click on “USB Driver”.
NOTE: Make sure to allow it to make changes to your computer if your anti-virus software requests it.
1. After the driver is installed, reopen the software. Your problem should be resolved.
Was this helpful? Thank you for your feedback!
E55BT Headphones: Track Information

To skip the tracks forward, you press and hold the volume up button for 3 seconds. To skip tracks backward, press and hold the volume down button for 3 seconds.

Was this helpful? Thank you for your feedback!
Ear Pad Cleaning Information

The ear pads can be removed and washed.
To remove the ear pads, rotate them anti-clockwise to unlock (see image below).

The ear pads must be hand washed only, do not machine wash - the water temperature used should be in the range specified below. Then wait for the ear pads to fully dry.

Once fully dry, align the holes on the inside of the ear pads (highlighted with orange circles in the image below) with the clips on the headphones (located where the red arrows are pointing in the image below), now rotate the ear pad clockwise to lock the ear pads to the headphones again.

Was this helpful? Thank you for your feedback!
Enabling or disabling Demo mode.
Demo mode
1. Press the Play and Boost button at the same time for 5 seconds.
2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
  1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
Was this helpful? Thank you for your feedback!
Endurance Dive Headphones: MP3 Information. How to add music, play function.

Here is how to add music to the Dive Headphones: 1. Place the MP3 music files that you want to transfer to the Dive headphones on your computer, where you can find them again. The sequence is not important, they will be played in alphanumerical sequence. If you want to have a special sequence to your tracks, you can add a number as the first file name. 2. Connect the Dive to your computer with the USB cable. Please use the cable that came with the headphones, since other USB cables may be wired for charging only, and may not work. 3. Your Dive will now pop up in your explorer folder overview as a new drive. Total capacity is about 991 MB. 4. Now you simply drag-and-drop the MP3 files from their location onto the Dive, or you mark the files, copy them and paste them onto the Dive. Do not use folders of any kind, and do not try to place other file types on the Dive's memory. MP3 files with a resolution of 320 kbits/second is maximum quality possible. Please note that the owner's manual contains an error about random play, stating that MP3 play will always be done in random sequence. Unfortunately, this is an error. All replay of MP3 files from the internal memory is alphanumerical, NOT random. As mentioned above, you can add a number to the track title, and the tracks will be played in numerical order, until no more numbers are present, after which replay is in alphabetical order.

Was this helpful? Thank you for your feedback!
ENDURANCE PEAK 3: Software Update Release Notes
ENDURANCE PEAK 3
Software Update Release Notes
------------------------------------------------------------------------
Version: 4.7.0
Release Date: November 29, 2023
Release Media: OTA (over the air) Automatic Update through JBL Headphone App

What’s New
1. Update BT name to "JBL Endurance Peak 3"
Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Apt X

The Endurance headphones do not support Apt X or AAC audio codecs.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Charging

Fully charge the earbuds along with the charging case before the first use. The charging case is for charging the earbuds only. LED behaviors: 1 LED- 25% 2 LED-25%-50% 3 LED-50%-75% 4 LED-75%-99% NO LED-100% Fully Charged You can keep the earbuds in standby mode for up to 3 hours without having to return them to the case. beyond this point the earbuds must be returned to the case for charging. You should receive up to 4 hours of playback with additional 24 hours of backup power from the charging case.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Pairing Information

If connecting for the first time, the headphone will enter pairing mode automatically after it is powered on. To turn the headphones on, simply spread apart the RIGHT power hook from the cord. You will see solid red LED and then it will flash blue as it begins to search for a device to connect to. The Endurance headphone should pop up on your discoverable devices within a few seconds and you should be connected! If you wish to turn off the headphones, remove them from your ear and allow the RIGHT power hook and cord to close together. This is magnetized, so they should close together with ease.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Phone Information

To answer call, press the "L" on the JBL logo on the RIGHT ear for 1 second. To hang up, press the "L" for 1 second. To ignore the call, press and hold the "L" for 2-3 seconds.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Switching Devices

To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Track Control

To pause/play press the "L" on the JBL logo located on the RIGHT ear for 1 second. If you want to skip the track forward, press the "L" on the JBL logo on the RIGHT ear hook for 2 seconds. To skip tracks backward, press the "L" on the JBL logo on the RIGHT ear hook for 3-4 seconds.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Volume Control

To control the volume, simply move your finger up the ridges above the JBL logo on the RIGHT ear to increase the volume. To decrease the volume, move your finger down along the ridges.

Was this helpful? Thank you for your feedback!
EQ Settings and Surround Information

In order to adjust your EQ settings you must follow these instructions: In your Windows 10 taskbar, right click on the volume icon. It should bring up your selected output device. If “Speakers (JBL Quantum *model* Game)” is not selected, please proceed to the next step.
In the upper right hand corner, select the arrow. This will display a list of output devices on your PC. Please select “Speakers (JBL Quantum *model* Game)” After selecting 'speakers' you will now be able to adjust your EQ settings to your preference.

Was this helpful? Thank you for your feedback!
Factory Reset Information

Power on the speaker Press and hold the Volume + button and the Bluetooth button together for 3-5 seconds until the speaker turns off Once turned off, the speaker has been reset to the factory default settings

Was this helpful? Thank you for your feedback!
Factory Reset Procedure

To reset the JBL Charge 5, Charge Essential or Charge Essential 2:

Volume+ & Play/Pause Long press for 2 seconds while the speaker is ON

Please note: If the Charge 5 was previously paired with any phones/tablets, please remove the speaker from your list of paired Bluetooth devices. Now it has been restored to its factory settings, it will automatically enter into pairing mode the first time you power it on.

Was this helpful? Thank you for your feedback!
Firmware Information - JBL Firmware Update App

If you are experiencing issues with your headphones' Bluetooth disconnecting and reconnecting while on standby, there is a new Firmware Update app to resolve this issue. Start by downloading the app "JBL Firmware Update" (see links below).
Google Play Store: https://play.google.com/store/apps/details?id=com.jbl.tune.update
App Store: https://apps.apple.com/gb/app/jbl-firmware-update/id1548227663

Once downloaded, you can update your headphones firmware from there.
Below you can see step by step images of the update process.

Was this helpful? Thank you for your feedback!
Fit and Sizing

Try all Flex Fit Ear fins included (S/M/L) to find a snug fit for stability during workout. Usually the biggest size that fits comfortably in your ear will provide the most stability. Try all ear tip sizes (S/M/L) to find a snug seal for optimum sound quality, and look for a balance of comfort and acoustic sealing.

Was this helpful? Thank you for your feedback!
FLIP 6: Software Update Release Notes
FLIP 6

Software Update Release Notes

------------------------------------------------------------------------

Version: 0.6.9.3

Release Date: July 5, 2024

Release Media: OTA (over the air) Update through JBL Portable App

What’s New
1. Fixed issue where a popping noise can be heard when pressing the power button to turn off the speaker
------------------------------------------------------------------------

Version: 0.6.8.9

Release Date: October 31, 2023

Release Media: OTA (over the air) Update through JBL Portable App

What’s New
1. Improved PartyBoost capability
Was this helpful? Thank you for your feedback!
FM Preset Stations

AUTO SCAN:
Long Press Enter/ Exit to Auto Scan
Auto Scan will automatically search for all available stations and save to Presets

TUNE DOWN / TUNE UP:
Press 1x to tune down/up by step, manually
Press 2x to tune to the previous/next preset station

Was this helpful? Thank you for your feedback!
Focus 500 Headphones: Pairing Information

To power on the device, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audible voice stating, “powering on” and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the Focus 500/700 Wireless headphone. Once you select that option, the audible voice should state, “connected”. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible voice stating, “powering on….looking for device” You will see the Bluetooth light alternate between red and blue when it is in pairing mode. Once connected the Bluetooth will change to a flashing LED light and the audible voice will state, “connected”.

Was this helpful? Thank you for your feedback!
For how long can I play music before I have to recharge the battery?

Approximately 8 hours streaming music or 20 hours of talk time.

Was this helpful? Thank you for your feedback!
For how long does the alarm sound, if it is not interrupted?

Horizon's alarm sounds for 3 minutes, then it shuts off, or rather it goes into snooze, for 9 minutes. Then it sounds the alarm again for 3 minutes, followed by snooze for another 9 minutes. After this final snooze period, it starts playing, and keeps on playing until it is manually shut off. The light shuts off with the audio.

Was this helpful? Thank you for your feedback!
Front LED flashes sporadically while streaming audio

Random flashing is an indication that the wireless link between primary and associated speakers was lost and recovered. If this happens too often, it may be caused by interference in the 2.4 GHz ISM band, caused by overcrowding of the band. Sometimes it helps to change location of the speakers, or to shut down other 2.4 GHz devices.

Was this helpful? Thank you for your feedback!
Functionality of Bass/Treble/Echo Buttons

The Bass, Treble and Echo buttons on the control panel on top of the Partybox only applies these EQs/effect to the Microphone inputs on the rear of the speaker - for Karaoke use. The EQs and Echo effect cannot be applied to other sources or inputs such as Bluetooth, Aux or USB.

If more bass is desired, there is a Bass Boost button on the top control panel (with 2 levels of Bass Boost: Off, Level 1 & Level 2, switched through pressing the button multiple times). This will be applied to the sources and inputs mentioned above (but not the microphone inputs).

Was this helpful? Thank you for your feedback!