How To

How To

1203 results
  • There are 5 sound modes: - Standard - Movie - Music - Voice - Sports Out the box, "Standard" sound mode is the default setting. The display on the soundbar's front panel will show which mode you are in (excluding the Bar Studio) Dotted LED lights on the side of the JBL Studio indicates when sound more your are in, the patterns are as follows: - Standard: One LED dot - Movie: Two LED dots - Music: Three LED dots - Voice: Four LED dots - Sports: Five LED dots
  • These are bass tuning canals, used to provide full sound.
  • The Endurance Dive supports SBC. But the main signal transfer is A2DP, v1.3.
  • Codecs such as MP3, AAC-LC, HE+ACC, FLAC, Vorbis, Wav, CELT/opus are supported via Wi-Fi streaming. For Bluetooth, codecs such as SBC and AAC are supported.
  • It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect App
  • You can adjust equalizer, RGB LED effects, change microphone settings and update the headset's firmware.
  • It supports 3 CEC commands; System Standby, OneTouch Play and Audio Return Channel.
  • Any device that has Bluetooth capabilities and supports A2DP stereo audio streaming will be compatible with the Under Armour Sport Wireless headphones
  • NXTGeneration (Next Generation) active noise cancelling gives consumers a new level of control over their listening experience. Harman’s noise cancelling technology actively reduces noise so it doesn’t interfere with your listening experience. However, we recognize that in certain environments, you need to have greater awareness of your surroundings and don’t want to be fully isolated from important sounds– whether it is on a city street, in the office or while commuting. Harman’s adjustable ambient aware technology gives the user the ability to bring in the sounds around them and fully adjust the balance between how loud the outside sounds are
  • With HARMAN Volume you can set your desired volume between low, medium and high. You can listen to your audio without sudden distracting changes such as blasts from ads, and volume variations as you switch between channels on your TV. Other benefits include full sound effects even at low volumes, this means if you are watching movies (DVD, BlueRay disc) and HARMAN volume is set to low volume, then the signal is more compressed, than what the other volume levels is. This will allow you to hear natural, consistent sound at low volume level, and not only hearing voice conversation from movies, giving you the same movie experience just with lower volume. What is best for you is a matter of personal preference, so we recommend playing around with the three different levels.
  • Rating IPX7 means that the device can be submerged in 1m of water for up to 30 minutes without permanent damage, but it has not been tested against the entry of dust.
  • Water splashing against the speaker from any direction should have no harmful effect on the unit.
  • The product + indicates splashproof.
  • Audio feedback turns on tones that let you know that something is happening on the product. When Audio feedback is ON, you will hear tones for:
    • Bluetooth Pairing.
    • SoundShift on/off.
    • JBL Connect Pairing Mode (Boost TV only)
  • Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
    You can set the audio delay time between 0 msec and 250 msec.
    Note: The audio delay time you specify may not be exact, depending on the played content.
    The audio sync function will not resolve instances where the video is ahead of the audio.
  • During charging, the LED lights red constantly. When it is fully charged, the LED goes out. No light.
  • There is a constant red light in the LED while charging takes place. When charging is complete, the diode goes dark.
  • It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
    Once set up, you can directly access it through the remote control or within the JBL ONE App.
  • The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.
  • The Wi-Fi indicator shows the signal strength between your speaker and Wi-Fi router. 3 bars = perfect signal 2 bars = good signal 1 bar = low/poor signal (which might cause dropouts or other issues)
  • The battery LED's show how much the battery is charged on your LINK 10 or LINK 20 speaker.
  • Here is a list of what the LED lights mean.
    • Light OFF: Power OFF, no charger connected, OR charger connected, fully charged.
    • RED light ON: Power OFF, charger connected and charging.
    • BLUE light flashing: Power ON, no Bluetooth connected.
    • Constant BLUE light: Power ON, connected to Bluetooth device.
    • RED/BLUE light flashing: Power ON, in pairing mode.
    • RED light flashing: Power ON, low battery.
  • Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.
  • Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.
  • You can adjust equalizer, RGB LED effects, calibrate Quantum ONE headtracking, change microphone settings and update the headset's firmware.
  • In some cases there may be an unforeseen stock limitation or products may no longer be available. We will try to inform you by email as soon as possible of any delays and/or unforeseen changes.
  • The soundbar will auto switch the source between HDMI eARC and optical. HDMI eARC is higher priority than optical source. It is not possible to manually switch from HDMI to optical.
  • All speakers are set to react when you use the keywords to interact with Google. To eliminate multiple speakers talking at the same time, using the "Microphone Mute" button will stop the speaker from reacting to the keywords.
  • You can access your Assistant history if you go to My Activity (myactivity.google.com) or the My Activity link in the Google Home app to view what you have asked and delete it if you want.
  • We use the microphones on the outside of the earcup to pick up the outside ambient noise and play through the headphone. With the unique JBL solution, the user can adjust the level of the ambient noise up or down, and the balance from left to right, so that they are in full control of how loud the ambient sound is in each earcup.
< 1 ... 33 34 35 36 37 ... 41 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a support agent
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat With Us

Chat With Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)